[meta-freescale] Error 0x300b in Qt5 applications with EGLFS

[Marco]

Il 17/11/2013 20:53, Alfonso Tamés ha scritto:
>
> Using a wand board quad with the LCD display from Future Electronics, I am building qt5 using the master branch by cloning meta-qt5 in the sources directory, adding the directory in conf/bblayers.conf and adding this in the conf/local.conf:
>
> IMAGE_INSTALL_append = " qtbase qtbase-plugins qtbase-examples cinematicexperience gstreamer nano cairo pango fontconfig freetype “
>
> To successfully build qt5 I remove the cmake directory in recipes-devtools and apply this patch http://patchwork.openembedded.org/patch/60673/ to Qt5 (I know its not the best way and Otavio doesn’t like it :P ). I am also putting USE_X11 = “no” in sources/meta-fsl-arm/recipes-graphics/gpu-viv-bin-mx6q/gpu-viv-bin-mx6q.inc so framebuffer gpu drivers get included.
>



I'm trying to follow your path with imx6qsabresd but the build fails.

Build Configuration:
BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-12.04"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "imx6qsabresd"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5"
TUNE_FEATURES     = "armv7a vfp neon callconvention-hard cortexa9"
TARGET_FPU        = "vfp-neon"
meta
meta-yocto
meta-yocto-bsp    = "dora:75bed4086eb83f1d24c31392f3dd54aa5c3679b1"
meta-oe           = "dora:513e7ca20ddd0a5c3b649bf292a67c3e0473d3a8"
meta-fsl-arm      = "dora:5b3b6618426ad06e4fb6a3a77c4a53dfb47f0556"
meta-qt5          = "dora:cefaba69a785c5221463f0eb496b749d5ddf8a5a"
meta-kaeilos-fsl  = "dora:75bed4086eb83f1d24c31392f3dd54aa5c3679b1"


WARNING: 
/home/koan/yocto/poky/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux-gnueabi/qtbase/5.1.1-r0/temp/run.do_compile.30368:1 
exit 1 from
|   exit 1
| ERROR: Function failed: do_compile (log file is located at 
/home/koan/yocto/poky/build/tmp/work/cortexa9hf-vfp-neon-mx6-poky-linux-gnueabi/qtbase/5.1.1-r0/temp/log.do_compile.30368)
ERROR: Task 344 
(/home/koan/yocto/poky/meta-qt5/recipes-qt/qt5/qtbase_5.1.1.bb, 
do_compile) failed with exit code '1'

Are you using the same branches?
Any clues?


TIA
-- 
Marco