[meta-freescale] Freescale LTIB BSP fix

[Otavio Salvador]

On Wed, May 29, 2013 at 9:23 AM, Alexander Smirnov <
alex.bluesman.smirnov at gmail.com> wrote:

> I'm newcomer here and I got this list address from Freescale's community
> site.
> I work with LTIB for i.MX6 dual/quad core platforms, and during code
> investigation
> I've found several issues.
>
> Is it right place to discuss LTIB related issues?
> Could anybody please review the patch and, if it's not a right place,
> point me to
> the correct list.
>

No; this mailing list is for Yocto discussion. I invite you to give the
Yocto a try so you can migrate from LTIB to it. It should easy your long
term maintenance work a lot and allow you to share a lot of work with
community members.

I don't know which board you're using for your work but I did a small blog
post which provides a small 'guide' how to get up a running image with
Nitrogen board at
http://www.ossystems.com.br/blog/2013/04/15/yocto-with-boundary-devices-nitrogen6x-5-steps-only/;
I hope it helps.

Regards,

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130529/ff41c082/attachment.html>