[meta-freescale] Nitrogen6x w/ OV5642
eric.nelson at boundarydevices.com
Wed May 22 17:02:44 PDT 2013
Is this the first time you've used the module?
If so, I suspect a cabling issue. The flex connectors can
be a pain to get right the first time:
Theres a photo here of how the cables should be connected
to Nitrogen6X (i.e. blue side up):
I'll try to get a Dylan image built, but that may bleed into
next week, since I'm taking a few days off.
On 05/22/2013 04:56 PM, Sébastien Taylor wrote:
> MFW_GST_V4LSRC_PLUGIN 3.0.5 build on May 21 2013 14:49:13.
> Running gst-launch with DEBUG=*:3 shows that the failure is caused by being unable to open /dev/video0 though the device is there.
> On 2013-05-22, at 5:01 PM, Eric Nelson <eric.nelson at boundarydevices.com> wrote:
>> Hi Sébastien,
>> On 05/22/2013 03:43 PM, Sébastien Taylor wrote:
>>> I'm on the Dylan branch and I've tried withboth the default
>>> linux-boundary kernel as well as updating the .bb to use
>>> the latest 1.1.1 branch from boundary.
>>> Looks like I'll have to dig a little deeper to see what's causing
>>> mfw_v4lsrc to fail (mfw_v4lsink works fine with a videotestsrc).
>> Can you check the version of the gstreamer plugins?
>> root at nitrogen6x# gst-inspect mfw_v4lsrc | head -n 1
>> Our 1.1.1 branch is confirmed to work with the 3.0.5 package,
>> but I haven't yet pushed a kernel matching the 4.0.0. BSP
>> release (I'm hoping to do some clean up along the way).
>> Please advise,
More information about the meta-freescale