[meta-freescale] 回复: run DirectFB(v1.4.0) with vivante acceleration failed

jojo rjiejie at gmail.com
Tue May 14 21:59:15 PDT 2013


Hi,  
I open the debug switch of directfb & compile again, it's fine ….

it's my mistake…sorry….  

Thanks,

- Jojo


在 2013年5月14日星期二,下午9:50,jojo 写道:

> Hi,  
> Yes…the cmd "df_fire" can not display anything (black full screen)...
>  
> --  
> jojo
>  
>  
> 在 2013年5月14日星期二,下午8:09,Gary Thomas 写道:
>  
> > On 2013-05-14 06:00, jojo wrote:
> > > Hi,
> > > I compiled & installed the directfb version with matched Vivante acceleration in yocto "dylan", but run test case failed,
> > >  
> >  
> >  
> > What's the failure? I only see a warning.
> >  
> > >  
> > > anyone have any idea with this ?
> > >  
> > > root at imx6qsabresd:~# df_fire
> > >  
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.0 |~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > (c) 2001-2009 The world wide DirectFB Open Source Community
> > > (c) 2000-2004 Convergence (integrated media) GmbH
> > > ----------------------------------------------------------------
> > >  
> > > (*) DirectFB/Core: Single Application Core. (2013-05-14 10:06)
> > > (*) Direct/Memcpy: Using libc memcpy()
> > > (*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] <8388608>...
> > > (*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/FBDev: Found 'DISP3 BG' (ID 0) with frame buffer at 0x18000000, 4050k (MMIO 0x00000000, 0k)
> > > (*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: gpio-keys (1) 0.1 (directfb.org (http://directfb.org))
> > > (*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: max11801_ts (2) 0.1 (directfb.org (http://directfb.org))
> > > (*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: mag3110 (3) 0.1 (directfb.org (http://directfb.org))
> > > (*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: mma845x (4) 0.1 (directfb.org (http://directfb.org))
> > > (*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: Lenovo Lenovo Low Profile USB K (5) 0.1 (directfb.org (http://directfb.org))
> > > (*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: Lenovo Lenovo Low Profile USB K (6) 0.1 (directfb.org (http://directfb.org))
> > > (*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: WM8962 Beep Generator (7) 0.1 (directfb.org (http://directfb.org))
> > > (*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: USB Optical Mouse (8) 0.1 (directfb.org (http://directfb.org))
> > > (*) Direct/Thread: Started 'Keyboard Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: Keyboard 0.9 (directfb.org (http://directfb.org))
> > > (*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: IMPS/2 Mouse (1) 1.0 (directfb.org (http://directfb.org))
> > > (*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...
> > > (*) DirectFB/Input: IMPS/2 Mouse (2) 1.0 (directfb.org (http://directfb.org))
> > > (*) Using the default feature settings.
> > > (*) DirectFB/Graphics: Vivante unknown chip model 1.0 (Vivante)
> > > (*) DirectFB/Core/WM: Default 0.3 (directfb.org (http://directfb.org))
> > > (*) FBDev/Mode: Setting 1920x1080 RGB16
> > > (*) FBDev/Mode: Switched to 1920x1080 (virtual 1920x2160) at 16 bit (RGB16), pitch 3840
> > > (!!!) *** WARNING [unable to adjust heap offset] ***
> > > [/home/jojo/work/imx6q/rootfs_builder.orig/build-dfb/tmp/work/armv7a-vfp-neon-poky-linux-gnueabi/directfb/1.4.0-r0/DirectFB-1.4.0/systems/fbdev/surfacemanager.c:167 in
> > > dfb_surfacemanager_adjust_heap_offset()]
> > > (*) FBDev/Surface: Allocated 1920x1080 16 bit RGB16 buffer (index 0) at offset 0 and pitch 3840.
> > > (*) FBDev/Surface: Allocated 1920x1080 16 bit RGB16 buffer (index 1) at offset 4147200 and pitch 3840.
> > > (*) FBDev/Mode: Setting 1920x1080 LUT8
> > > (*) FBDev/Mode: Switched to 1920x1080 (virtual 1920x2160) at 8 bit (LUT8), pitch 1920
> > > (*) FBDev/Surface: Allocated 1920x1080 8 bit LUT8 buffer (index 0) at offset 0 and pitch 1920.
> > > (*) FBDev/Surface: Allocated 1920x1080 8 bit LUT8 buffer (index 1) at offset 2073600 and pitch 1920.
> > >  
> >  
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale at yoctoproject.org (mailto:meta-freescale at yoctoproject.org)
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> >  
> >  
> >  
>  
>  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130515/db010fd5/attachment.html>


More information about the meta-freescale mailing list