[meta-freescale] ERROR building fsl-image-test for i.MX6SL eVK

[Michael Urbaniak]

I went back to the core-image-minimal and the same issue occurs although
not every time.
It will hang 7 out of 10 attempts.
Mostly here:
EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 180K

I tried different sd cards all with the same result.
I then copied my LTIB image's to the same cards and they boot every
time.

Strange......


-----Original Message-----
From: Daiane Angolini [mailto:daiane.angolini at freescale.com] 
Sent: Wednesday, March 27, 2013 8:23 AM
To: Michael Urbaniak
Cc: Otavio Salvador; meta-freescale at yoctoproject.org
Subject: Re: [meta-freescale] ERROR building fsl-image-test for i.MX6SL
eVK

On 03/26/2013 05:43 PM, Michael Urbaniak wrote:
> That allowed the build to complete.
> I created the sd card but it seems to hang at different points during 
> boot.
>
> For example:
> Waiting for root device /dev/mmcblk0p2...
> mmc1: new high speed SDHC card at address aaaa
> mmcblk0: mmc1:aaaa SU08G 7.40 GiB
>
> or next reset
>
> VFS: Mounted root (ext3 filesystem) on device 179:2.
> devtmpfs: mounted
> Freeing init memory: 180K
> INIT: version 2.88 booting
>
> or next reset
> VFS: Mounted root (ext3 filesystem) on device 179:2.
> devtmpfs: mounted
> Freeing init memory: 180K

Very first boot is really slow. (and I always get confused about what is
a slow boot and a boot crash when using very first boot sdcards)

So, could you, please, give some time to the very first boot?

I mean, only to make sure this is not the case ;)


Thanks a lot in advance,
Daiane