[meta-freescale] [yocto] Problems building core-image-minimal for meta-fsl-asm-extra / 'wandboard-dual'

[Chris Tapp]

On 27 Jun 2013, at 17:08, Jeff Osier-Mixon wrote:

> Forwarding to meta-freescale (and I highly recommend joining this
> list, c/o https://lists.yoctoproject.org)

Thanks. I've just added myself to the list as well.

> 
> ---------- Forwarded message ----------
> From: Chris Tapp <opensource at keylevel.com>
> Date: Thu, Jun 27, 2013 at 12:54 AM
> Subject: [yocto] Problems building core-image-minimal for
> meta-fsl-asm-extra / 'wandboard-dual'
> To: Yocto Discussion Mailing List <yocto at yoctoproject.org>
> 
> 
> I'm trying to build core-image-minimal for the 'wandboard-dual'
> machine from meta-fsl-arm extra
> (https://github.com/Freescale/meta-fsl-arm-extra).
> 
> The README for that layer states that it depends on
> git.openembedded.org/openembedded-core and
> git.yoctoproject.org/meta-fsl-arm, both at branch 'danny' and revision
> 'HEAD'.
> 
> So, my bblayers looks like:
> 
> LCONF_VERSION = "6"
> 
> BBPATH = "${TOPDIR}"
> BBFILES ?= ""
> 
> BBMASK = "udev_.*\.bbappend$"
> 
> BBLAYERS ?= " \
>  /media/SSD-RAID/poky-git/meta \
>  /media/SSD-RAID/poky-git/meta-yocto \
>  /media/SSD-RAID/poky-git/meta-yocto-bsp \
>  /media/SSD-RAID/meta-fsl-arm-git \
>  /media/SSD-RAID/meta-fsl-arm-extra-git \
>  "
> 
> (The -git just reminds me that I'm using git repos!).
> 
> To (try and) make sure I have the correct branches I've run:
> 
>   git checkout origin/danny --- for meta-fsl-arm
> 
> and
> 
>   git checkout origin/master --- for meta-fsl-arm-extra
> 
> The dependencies listed in the README for origin/danny in meta-fsl-arm
> look to fit in with the above.
> 
> I've also selected a 'danny' branch within my 'poky' repo:
> 
>   git checkout danny-8.0.2
> 
> I've then built:
> 
>   bitbake core-image-minimal
> 
> However, I'm getting an error in u-boot-fslc:
> 
> ERROR: Function failed: do_compile (see
> /media/SSD-RAID/build-danny-wandboard/tmp/work/wandboard_dual-poky-linux-gnueabi/u-boot-fslc-v2012.10-r4/temp/log.do_compile.31641
> for further information)
> ERROR: Logfile of failure stored in:
> /media/SSD-RAID/build-danny-wandboard/tmp/work/wandboard_dual-poky-linux-gnueabi/u-boot-fslc-v2012.10-r4/temp/log.do_compile.31641
> Log data follows:
> | DEBUG: Executing shell function do_compile
> | NOTE: make -j 16 CROSS_COMPILE=arm-poky-linux-gnueabi-
> CC=arm-poky-linux-gnueabi-gcc
> --sysroot=/media/SSD-RAID/build-danny-wandboard/tmp/sysroots/wandboard-dual
> wandboard_dl_config
> | make: *** No rule to make target `wandboard_dl_config'.  Stop.
> | make: *** [wandboard_dl_config] Error 1
> | ERROR: oe_runmake failed
> | ERROR: Function failed: do_compile (see
> /media/SSD-RAID/build-danny-wandboard/tmp/work/wandboard_dual-poky-linux-gnueabi/u-boot-fslc-v2012.10-r4/temp/log.do_compile.31641
> for further information)
> ERROR: Task 68 (/media/SSD-RAID/meta-fsl-arm-git/recipes-bsp/u-boot/u-boot-fslc_2012.10.bb,
> do_compile) failed with exit code '1'
> 
> Can anyone point out where I've gone wrong?
> 
> Chris Tapp
> 
> opensource at keylevel.com
> www.keylevel.com
> 
> 
> 
> _______________________________________________
> yocto mailing list
> yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
> 
> 
> --
> Jeff Osier-Mixon http://jefro.net/blog
> Yocto Project Community Manager @Intel http://yoctoproject.org

Chris Tapp

opensource at keylevel.com
www.keylevel.com