[meta-freescale] [meta-fsl-arm-extra][PATCH] gk802: Add initial support

[Matthias Benesch]

Hello,
I would like to commit support for Zealz GK802 Freescale i.MX6 Quad Core
device. 
The work is based on the information from
https://github.com/imx6-dongle/wiki/wiki 

Unfortunately it is not complete yet. U-Boot is working and the device
will load the kernel uImage from first fat partition. With the attached
"ubootcmd" file copied to the first fat partition of your micro-sd card,
the kernel will start completely, but will fail to init systemd (see
attached "gk802-boot.log" file).

I already tried several bootargs configuration via the ubootcmd file, up
to following bootargs config without any further success: 

setenv bootargs 'console=ttymxc3,115200 consoleblank=0
root=/dev/mmcblk0p2 rootfstype=ext3 init=/lib/systemd/systemd rootwait
rw video=mxcfb0:dev=hdmi,1280x720M at 60,if=RGB24'

I hope for the communitie's support to be able to finalize this work and
get the GK802 supported within Yocto.

Regards,
Matthias
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-gk802-Add-initial-support.patch
Type: text/x-patch
Size: 5647 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130730/94da8f23/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ubootcmd
Type: application/octet-stream
Size: 172 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130730/94da8f23/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gk802-boot.log
Type: text/x-log
Size: 14234 bytes
Desc: not available
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130730/94da8f23/attachment-0001.bin>