[meta-freescale] Freescale Linux kernel 3.10.17_1.0.0_beta

John Weber rjohnweber at gmail.com
Mon Dec 30 11:37:30 PST 2013


On 12/30/13 1:22 PM, Otavio Salvador wrote:
> On Mon, Dec 30, 2013 at 3:17 PM, Fabio Estevam <festevam at gmail.com> wrote:
>> On Mon, Dec 30, 2013 at 2:46 PM, John Weber <rjohnweber at gmail.com> wrote:
>>> As an side question - is there an issue with defaulting to using zImage
>>> instead of uImage for Yocto/u-boot?
>> No, I also think we should switch to zImage format. We only need to
>> update the script to call 'bootz' instead of 'bootm'.
> I think this is a great idea but I believe we ought to make this for
> all boards so we have it uniform across the boards; otherwise we'll
> have a mix and it makes the support harder.
>
> Considering we'd target this for 1.6, what would be the conversion plan?
>
> Who could be responsible for each board for converting/testing?
>
Not sure, my thought was to leave it to the board maintainers. Unless I'm 
mistaken (which is a possibility), for some reason uImage does not work when 
booting with the 3.10.X kernels.  It that is the case then we either need to 
figure out the problem with uImages or others will be forced to use zImage anyway.

Here are the steps I've considered:
A) Send two patches to meta-freescale for meta-fsl-arm-extra to make the conversion:
    1) bbappend for u-boot to patch the include/configs/<board>.h file to use 
and boot from zImage
    2) Patch conf/machine/include/<board>.inc to set KERNEL_IMAGETYPE to zImage

B) Test the current stable kernels with these settings

c) Upstream the U-boot patch to u-boot-imx




More information about the meta-freescale mailing list