[meta-freescale] Qt5 with Yocto

Handford, Michael michael.handford at harman.com
Thu Dec 12 01:56:21 PST 2013


Thanks Dimitry,

I've used dora for both unfortunately and still the problem. I'm going to start again from clean and if that fails I'll contact the meta-qt5 maintainers.

Thanks again for the help guys,

Mike.

From: meta-freescale-bounces at yoctoproject.org [mailto:meta-freescale-bounces at yoctoproject.org] On Behalf Of Dmitriy B.
Sent: 12 December 2013 09:42
To: meta-freescale at yoctoproject.org
Subject: Re: [meta-freescale] Qt5 with Yocto

Hi Alfonso,
you forgot to specify the branch you used on each layer.

Regards,
--
Marco

Since Alfonso didn't answer for couple of days, I will. Use the dora branch for *both* fsl-community-bsp-platform (when initializing your Yocto) and meta-qt5. If you try to run meta-qt5 master branch - it will fail to build with missing packages.

I just built minimal image without X11 and with qt5 as the manual suggests. EXTRA_IMAGE_FEATURES and IMAGE_INSTALL_append seem to work on dora branch.

Still didn't find time to test it on real board, but at least it builds without errors, my previous try couple months ago ended up with qt not building at all (errors with EGL integration and etc).

If you will have horrible errors with meta-qt5 like packages not being found or other issues like that - write directly to meta-qt5 maintainers as README suggests https://github.com/meta-qt5/meta-qt5/blob/master/README

Hope this helps,
Best Regards,
Dmitriy Beykun
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20131212/9dd288a5/attachment.html>


More information about the meta-freescale mailing list