[meta-freescale] Qt5 with Yocto

[Dmitriy B.]

>
> Hi Alfonso,
> you forgot to specify the branch you used on each layer.
>
> Regards,
> --
> Marco


Since Alfonso didn't answer for couple of days, I will. Use the dora branch
for *both* fsl-community-bsp-platform (when initializing your Yocto) and
meta-qt5. If you try to run meta-qt5 master branch - it will fail to build
with missing packages.

I just built minimal image without X11 and with qt5 as the manual
suggests. EXTRA_IMAGE_FEATURES and IMAGE_INSTALL_append seem to work on
dora branch.

Still didn't find time to test it on real board, but at least it builds
without errors, my previous try couple months ago ended up with qt not
building at all (errors with EGL integration and etc).

If you will have horrible errors with meta-qt5 like packages not being
found or other issues like that - write directly to meta-qt5 maintainers as
README suggests https://github.com/meta-qt5/meta-qt5/blob/master/README

Hope this helps,
Best Regards,
Dmitriy Beykun
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20131212/49393f73/attachment.html>