[meta-freescale] [meta-fsl-arm-extra][PATCH V2] u-boot-boundary: update to 2013-07 release
Eric Nelson
eric.nelson at boundarydevices.com
Thu Aug 29 13:18:20 PDT 2013
On 08/29/2013 01:09 PM, Otavio Salvador wrote:
> On Tue, Aug 27, 2013 at 3:52 PM, Eric Nelson
> <eric.nelson at boundarydevices.com> wrote:
>> This patch updates U-Boot and the boot script to the latest production
>> version as described in this post:
>> http://boundarydevices.com/u-boot-2013-07-release/
>>
>> For Yocto users, it also adds support for processor and memory
>> configurations other than the standard Quad-core/1GB option.
>>
>> To build U-Boot for other CPU or memory combinations, you can set
>> the UBOOT_MACHINE variable in your local.conf according to the
>> following table:
>>
>> Processor Memory Configuration
>> -------------- ------ --------------------
>> i.MX6Quad/Dual 1GB nitrogen6q_config
>> i.MX6Quad/Dual 2GB nitrogen6q2g_config
>> i.MX6Dual-Lite 1GB nitrogen6dl_config
>> i.MX6Dual-Lite 2GB nitrogen6dl2g_config
>> i.MX6Solo 512MB nitrogen6s_config
>> i.MX6Solo 1GB nitrogen6s1g_config
>>
>> This patch also updates the boot script to allow support
>> for device-tree-enabled kernels in preparation for a 3.5.7
>> alpha release.
>>
>> If a device-tree binary (imx6q_sabrelite.dtb or imx6q_nitrogen6x.dtb)
>> is found in the root directory of the boot (p1) partition, it
>> will be passed to the kernel.
>>
>> Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
>
> Thanks by doing this, comment below:
> ...
>
>> --- a/recipes-bsp/u-boot/u-boot-script-boundary_git.bb
>> +++ b/recipes-bsp/u-boot/u-boot-script-boundary_git.bb
>> @@ -5,9 +5,8 @@ DEPENDS = "u-boot-mkimage-native"
>>
>> PV = "v2013.01+git${SRCPV}"
>>
>> -SRCREV = "d6b05d35b8b29392e71fdd8fa43d5cb8bd4fe276"
>> -SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git \
>> - file://nitrogen6x-bootscript-modify-for-use-with-the-Yocto.patch"
>> +SRCREV = "f89bc066db0569008418fac1a0408a9a57f2232f"
>> +SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git"
>
> You forgot to remove the patch file. I fixed it while merging it ;-)
>
Thanks Otavio.
More information about the meta-freescale
mailing list