[meta-freescale] [meta-fsl-arm][PATCH] mx28-bcb: add utility to generate Boot Control Block

[Alexandre Belloni]

Hi,

On 22/08/2013 12:19, Eric Bénard wrote:
> Hi Alexandre,
>
> Le Thu, 22 Aug 2013 12:14:05 +0200,
> Alexandre Belloni <alexandre.belloni at free-electrons.com> a écrit :
>
>> From chapter 12.11.1 of the i.MX28 Applications Processor Reference
>> Manual, Rev. 1, 2010, a Boot Control Block is needed when booting from
>> an SD/MMC card. The mx28_bcb.py utility will generate and write the BCB
>> to a file, it will also write the provided bootstream.
>>
>> Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
>> ---
>>  recipes-bsp/mx28-bcb/files/COPYING     | 340 +++++++++++++++++++++++++++++++++
>>  recipes-bsp/mx28-bcb/files/mx28_bcb.py |  56 ++++++
>>  recipes-bsp/mx28-bcb/mx28-bcb_1.bb     |  21 ++
>>  3 files changed, 417 insertions(+)
>>  create mode 100644 recipes-bsp/mx28-bcb/files/COPYING
>>  create mode 100755 recipes-bsp/mx28-bcb/files/mx28_bcb.py
>>  create mode 100644 recipes-bsp/mx28-bcb/mx28-bcb_1.bb
>>
>> diff --git a/recipes-bsp/mx28-bcb/files/COPYING b/recipes-bsp/mx28-bcb/files/COPYING
>> new file mode 100644
>> index 0000000..6d45519
>> --- /dev/null
>> +++ b/recipes-bsp/mx28-bcb/files/COPYING
> .../...
>> +LICENSE = "GPLv2"
>> +LIC_FILES_CHKSUM = "file://COPYING;md5=12f884d2ae1ff87c09e5b7ccc2c4ca7e"
>> +
> LIC_FILES_CHKSUM =
> "file://${COREBASE}/meta/files/common-licenses/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"
>
> and you can avoid to include COPYING in the recipe (md5 are differents
> because the files have different layout but content is the same).
>
> Eric

Oh, right, I looked at it bit and I couldn't find it quickly enough and
ended up copying it from an example. Thanks !

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com