[meta-freescale] Wandboard U-boot (2013.07-rc3) issues

[Diego Sueiro]

Hi there,

I believe that v2013.04 is not using the right default environment values
because of the error message below.

U-Boot 2013.04 (Aug 07 2013 - 08:06:08)

CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM:  1 GiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Warning: FEC using MAC address from net device

Hit any key to stop autoboot:  0
mmc0 is current device
** Unrecognized filesystem type **
** Unrecognized filesystem type **
Booting from net ...
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3

Anyone has this binary version to send me?


When trying to compile v2013.04 u-boot version I had to do
some workarounds to get it done.

Build Configuration:
BB_VERSION        = "1.19.1"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Ubuntu-12.10"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "wandboard-dual"
DISTRO            = "poky"
DISTRO_VERSION    = "1.4+snapshot-20130807"
TUNE_FEATURES     = "armv7a vfp neon callconvention-hard cortexa9"
TARGET_FPU        = "vfp-neon"
meta
meta-yocto        = "master:9de0ad47462c13ac4a2d73e12e92be6c1b4e0415"
meta-oe           = "master:6b50a7d6621eba239380b11606110caab814eb51"
meta-fsl-arm      = "master-next:65779d09ca241acb23a1d018d47b55cc260cb056"
meta-fsl-arm-extra = "master-next:134324944624bf6913c8c09d7cbae2e76e0bfd24"
meta-fsl-demos    = "master-next:2c63f9ff40e940ce120f005075429ffc06bbface"


Steps:

bitbake u-boot -c devshell

git ckeckout v2013.04

export CROSS_COMPILE=arm-poky-linux-gnueabi- //Without this I get
a /bin/bash: arm-linux-gcc: command not found

export LDFLAGS  //Without this I got linker error
about unrecognized options.

make distclean

make wandboard_dl_config

make


Regards,

--
*dS
Diego Sueiro

Administrador do Portal Embarcados
www.embarcados.com.br

Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ

/*long live rock 'n roll*/


On Tue, Aug 6, 2013 at 9:16 AM, Otavio Salvador <otavio at ossystems.com.br>wrote:

> On Fri, Jul 26, 2013 at 1:38 AM, Marek Vasut <marex at denx.de> wrote:
> > Dear Fabio Estevam,
> >
> >> Hi Diego,
> >>
> >> On Wed, Jul 24, 2013 at 10:00 AM, Diego Sueiro <diego.sueiro at gmail.com>
> wrote:
> >> > Folks,
> >> >
> >> > I used two 8GB (class 6) uSD from Samsung and this issue is reproduced
> >> > sporadically.
> >> >
> >> > But for a 4GB (class 4) uSD from Kingston it booted without issues.
> >>
> >> That's interesting.
> >>
> >> If you could ship me one of this Samsung card, I will be glad to debug
> it.
> >
> > Does is also happen with 2013.04? If not, you can bisect it.
>
> Diego,
>
> did you try to reproduce it using old U-Boot?
>
> --
> Otavio Salvador                             O.S. Systems
> http://www.ossystems.com.br        http://projetos.ossystems.com.br
> Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20130807/cbaec2ef/attachment.html>