[meta-freescale] fsl-image-gui setup eth0 static
Daiane Angolini
daiane.angolini at freescale.com
Mon Aug 5 09:22:59 PDT 2013
On 08/04/2013 04:45 PM, Joerg Boge wrote:
> On 08/04/2013 09:09 PM, Otavio Salvador wrote:
>> On Sun, Aug 4, 2013 at 8:38 AM, Joerg Boge <joerg.boge at gmx.de> wrote:
>>> I want to have static ip
>>>
>>> so i changed /etc/network/interfaces
>>>
>>> # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>>>
>>> # The loopback interface
>>> auto lo
>>> iface lo inet loopback
>>>
>>> # Wireless interfaces
>>> iface wlan0 inet dhcp
>>> wireless_mode managed
>>> wireless_essid any
>>> wpa-driver wext
>>> wpa-conf /etc/wpa_supplicant.conf
>>>
>>> iface atml0 inet dhcp
>>>
>>> # Wired or wireless interfaces
>>> auto eth0
>>> iface eth0 inet static
>>> address 192.168.2.8
>>> netmask 255.255.255.0
>>> network 192.168.2.254
>>> gateway 192.168.2.1
>>> iface eth1 inet dhcp
>>>
>>> # Ethernet/RNDIS gadget (g_ether)
>>> # ... or on host side, usbnet and random hwaddr
>>> iface usb0 inet static
>>> address 192.168.7.2
>>> netmask 255.255.255.0
>>> network 192.168.7.0
>>> gateway 192.168.7.1
>>>
>>> # Bluetooth networking
>>> iface bnep0 inet dhcp
>>>
>>>
>>>
>>> do ifdown eth0
>>> ifup eth0
>>>
>>> and I can connect to static ip
>>>
>>> after reboot there is no connection to the static ip possible and
>>> a new
>>> dynamic ip is taken via dhcp.
>>>
>>> i do ifdown and ifup again. now i can connect via ssh to static and the
>>> dynamic ip.
>>>
>>> that is normal?
>> Yes and no.
>>
>> fsl-image-gui is using connman for network management so you need to
>> set IP there. Please make your own image for specific needs as this
>> one is not intended to be used for long time but just as testing/demo.
>>
> I waiting for Task #10 - How to create a custom layer from Yocto
> Training Home ;)
>
I'm baking it right now :D
If you have other topic idea, please, let me know
--
Daiane
More information about the meta-freescale
mailing list