[meta-freescale] (no subject)

McClintock Matthew-B29882 B29882 at freescale.com
Tue Nov 27 09:02:26 PST 2012


On Tue, Nov 27, 2012 at 2:45 AM, GOPIKRISHNAN S <gopikrishnans at pec.edu> wrote:
> I just did
> $ rm -rf build<machine>
> $ source ./fsl-setup-poky -m p2041rdb
> $ bitbake fsl-image-minimal
> $ bitbake vaminusers
>
> Attached vaminusers.bb
>
> Problem with useradd. First time
> NOTE: package vaminusers-1.0-r0: task do_install: Started
> ERROR: Function 'useradd_sysroot' failed (see
> /media/325GB_Drive/dev/QorIQ-SDK-V1.2-20120614-yocto/build_p2041rdb_release/tmp/work/ppce500mc-fsl-linux/vaminusers-1.0-r0/temp/log.do_install.19685
> for further information)
> ERROR: Logfile of failure stored in:
> /media/325GB_Drive/dev/QorIQ-SDK-V1.2-20120614-yocto/build_p2041rdb_release/tmp/work/ppce500mc-fsl-linux/vaminusers-1.0-r0/temp/log.do_install.19685
> Log data follows:
> | Running groupadd commands...
> | Note: group vamin1 already exists, not re-creating it
> | Note: group vamin already exists, not re-creating it
> | Running useradd commands...
> | useradd: group vamin1 exists - if you want to add this user to that group,
> use -g.
> | WARNING: useradd command did not succeed. Retrying...
> | useradd: group vamin1 exists - if you want to add this user to that group,
> use -g.
> | WARNING: useradd command did not succeed. Retrying...
> | useradd: group vamin1 exists - if you want to add this user to that group,
> use -g.
> | WARNING: useradd command did not succeed. Retrying...
> | useradd: group vamin1 exists - if you want to add this user to that group,
> use -g.
> | WARNING: useradd command did not succeed. Retrying...
> | useradd: group vamin1 exists - if you want to add this user to that group,
> use -g.
> | WARNING: useradd command did not succeed. Retrying...
> | useradd: group vamin1 exists - if you want to add this user to that group,
> use -g.
> | WARNING: useradd command did not succeed. Retrying...
> | useradd: group vamin1 exists - if you want to add this user to that group,
> use -g.
> | WARNING: useradd command did not succeed. Retrying...
> | useradd: group vamin1 exists - if you want to add this user to that group,
> use -g.
> | WARNING: useradd command did not succeed. Retrying...
> | useradd: group vamin1 exists - if you want to add this user to that group,
> use -g.
> | WARNING: useradd command did not succeed. Retrying...
> | useradd: group vamin1 exists - if you want to add this user to that group,
> use -g.
> | WARNING: useradd command did not succeed. Retrying...
> | ERROR: tried running useradd command 10 times without success, giving up
> | ERROR: Function 'useradd_sysroot' failed (see
> /media/325GB_Drive/dev/QorIQ-SDK-V1.2-20120614-yocto/build_p2041rdb_release/tmp/work/ppce500mc-fsl-linux/vaminusers-1.0-r0/temp/log.do_install.19685
> for further information)
> NOTE: package vaminusers-1.0-r0: task do_install: Failed
> ERROR: Task 2
> (/media/325GB_Drive/dev/QorIQ-SDK-V1.2-20120614-yocto/meta-testing/recipes/vaminusers/vaminusers.bb,
> do_install) failed with exit code '1'
> ERROR:
> '/media/325GB_Drive/dev/QorIQ-SDK-V1.2-20120614-yocto/meta-testing/recipes/vaminusers/vaminusers.bb'
> failed

What distro are you building on?

-M



More information about the meta-freescale mailing list