[meta-freescale] [meta-fsl-arm][PATCH 00/10] iMX6 Yocto Support based on 12.09.01 BSP

[Otavio Salvador]

On Wed, Nov 21, 2012 at 10:53 AM, Gary Thomas <samoht.yrag at gmail.com> wrote:
> On 2012-11-21 05:38, Otavio Salvador wrote:
>>
>> On Wed, Nov 21, 2012 at 10:34 AM, Gary Thomas <samoht.yrag at gmail.com>
>> wrote:
>>>
>>> On 2012-11-21 05:21, Otavio Salvador wrote:
>>>>
>>>>
>>>> On Wed, Nov 21, 2012 at 10:01 AM, Gary Thomas <samoht.yrag at gmail.com>
>>>> wrote:
>>>> ...
>>>>>
>>>>>
>>>>> That helped, but then it dies:
>>>>> [579761.853] (II) VIVANTE(0): FB Start = 0x2b0f9000  FB Base =
>>>>> 0x2b0f9000
>>>>> FB Offset = (nil)
>>>>> [579761.865] (II) VIVANTE(0): test Initializing EXA
>>>>> [579761.865]
>>>>> Backtrace:
>>>>> [579761.865] Segmentation fault at address 0xc
>>>>> [579761.865]
>>>>> Fatal server error:
>>>>> [579761.865] Caught signal 11 (Segmentation fault). Server aborting
>>>>> [579761.865]
>>>>
>>>>
>>>>
>>>> Good; now we need to fix this.
>>>>
>>>> I will take a look on this and I let you know if any news.
>>>>
>>>
>>> Here's a GDB backtrace:
>>>
>>> Program received signal SIGSEGV, Segmentation fault.
>>> 0x2b078fac in gcoOS_GetBaseAddress () from /usr/lib/libGAL.so
>>> (gdb) bt
>>> #0  0x2b078fac in gcoOS_GetBaseAddress () from /usr/lib/libGAL.so
>>> #1  0x2afeca78 in gcoHAL_MapUserMemory () from /usr/lib/libGAL.so
>>> #2  0x2ab341c0 in ?? () from /usr/lib/xorg/modules/drivers/vivante_drv.so
>>> #3  0x2ab341c0 in ?? () from /usr/lib/xorg/modules/drivers/vivante_drv.so
>>> Backtrace stopped: previous frame identical to this frame (corrupt
>>> stack?)
>>>
>>> Maybe I'm missing some piece, e.g. loading the video acceleration
>>> firmware?
>>> n.b. I don't know much about this platform, so I'm a bit in the dark.
>>
>>
>> It seems to be all done; I am pondering if it might be a problem with
>> our U-Boot; you might try to use Freescale U-Boot and give it a try.
>
>
> I'm using the U-Boot that came with the board.
>
> Should I try the one just built?  If so, how (is there a temporary way to
> try it)?

You can use the .sdcard file generated. It has all set.

-- 
Otavio Salvador                             O.S. Systems
E-mail: otavio at ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br