[meta-freescale] [meta-fsl-arm][PATCH 00/10] iMX6 Yocto Support based on 12.09.01 BSP
Gary Thomas
samoht.yrag at gmail.com
Wed Nov 21 04:01:40 PST 2012
On 2012-11-21 04:45, Otavio Salvador wrote:
> On Wed, Nov 21, 2012 at 9:34 AM, Gary Thomas <samoht.yrag at gmail.com> wrote:
>> On 2012-11-21 03:46, Otavio Salvador wrote:
>>>
>>> On Tue, Nov 20, 2012 at 7:29 PM, Gary Thomas <samoht.yrag at gmail.com>
>>> wrote:
>>>>
>>>> On 2012-11-20 08:23, Otavio Salvador wrote:
>>>>
>>>>> On Tue, Nov 20, 2012 at 1:20 PM, Gary Thomas <samoht.yrag at gmail.com
>>>>> <mailto:samoht.yrag at gmail.com>> wrote:
>>>>>
>>>>> On 2012-11-20 08:11, Otavio Salvador wrote:
>>>>>
>>>>> Hello,
>>>>>
>>>>> We've been working on this patchset for sometime. We are glad
>>>>> to
>>>>> be
>>>>> able to sure it among you all and I'd like to ask you to test
>>>>> and
>>>>> comment on them.
>>>>>
>>>>>
>>>>> I'll be glad to test this :-)
>>>>>
>>>>> Any guidance on what/how to build so the test coverage is
>>>>> maximised?
>>>>> I have a SabreLight with LCD+touch and would love to see a full-up
>>>>> X running on it.
>>>>>
>>>>>
>>>>> I am looking at a build failure when building fsl-image-gui (as it
>>>>> depends
>>>>> on mesa-demos) so I'd say for you to use core-image-x11 for now.
>>>>
>>>>
>>>>
>>>> Where do I get a recipe for xserver-xorg-module-exa?
>>>
>>>
>>> Something is wrong here. Why you needed it?
>>>
>>
>> The X server failed to start:
>> # /etc/init.d/xserver-nodm restart
>> Stopping XServer
>> Starting Xserver
>>
>> X.Org X Server 1.11.4
>> Release Date: 2012-01-27
>> X Protocol Version 11, Revision 0
>> Build Operating System: Linux 2.6.34.9-69.fc13.i686.PAE i686
>> Current Operating System: Linux sabrelite 3.0.35-12.09.01+yocto+geaaf30e
>> #2 SMP PREEMPT Thu Nov 8 08:19:03 MST 2012 armv7l
>> Kernel command line: console=ttymxc1,115200 root=/dev/ram0 rootfstype=ext3
>> ramdisk_size=65536 console=ttymxc1,115200 vmalloc=400M root=/dev/mmcblk0p2
>> rootwait consoleblank=0 video=mxcfb0:dev=lcd,CLAA-WVGA,if=RGB666
>> video=mxcfb1:dev=hdmi,1280x720M at 60,if=RGB24 calibration tsdev=tsc2004
>> fbmem=10M,28M
>> Build Date: 20 November 2012 11:23:40AM
>>
>> Current version of pixman: 0.27.2
>> Before reporting problems, check http://wiki.x.org
>> to make sure that you have the latest version.
>> Markers: (--) probed, (**) from config file, (==) default setting,
>> (++) from command line, (!!) notice, (II) informational,
>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 20 20:08:35 2012
>> (==) Using config file: "/etc/X11/xorg.conf"
>> (==) Using system config directory "/usr/share/X11/xorg.conf.d"
>> (EE) Failed to load module "extmod" (module does not exist, 0)
>> (EE) Failed to load module "dbe" (module does not exist, 0)
>> (EE) Failed to load module "glx" (module does not exist, 0)
>> (EE) Failed to load module "dri" (module does not exist, 0)
>> (EE) Failed to load module "dri2" (module does not exist, 0)
>> (EE) VIVANTE: Failed to load module "exa" (module does not exist, 0)
>> xinit: giving up
>> xinit: unable to connect to X server: Connection refused
>> xinit: server error
>>
>> root at sabrelite:~# Warning: Permanently added '192.168.1.182' (RSA) to the
>> list of known hosts.
>>
>> root at sabrelite:~# opkg list-installed 'xf86*'
>> xf86-input-evdev - 2:2.7.3-r19.0
>> xf86-video-fbdev - 2:0.4.3-r19.0
>> xf86-video-imxfb-vivante - 2:12.09.01-r0
>>
>> Full log attached. What am I missing?
>
> I fixed it locally.
>
> I am attaching the patch for you to apply locally. It will be fixed in
> a v2 of the patchset.
>
That helped, but then it dies:
[579761.853] (II) VIVANTE(0): FB Start = 0x2b0f9000 FB Base = 0x2b0f9000 FB Offset = (nil)
[579761.865] (II) VIVANTE(0): test Initializing EXA
[579761.865]
Backtrace:
[579761.865] Segmentation fault at address 0xc
[579761.865]
Fatal server error:
[579761.865] Caught signal 11 (Segmentation fault). Server aborting
[579761.865]
[579761.865]
More information about the meta-freescale
mailing list