[meta-freescale] QorIQ SDK 1.3 P2020rdb Error

[GOPIKRISHNAN S]

$ ls tmp/work/ppce500v2-fsl-linux-gnuspe/testfloat-2a-r1/
SoftFloat-2b  SoftFloat-powerpc-1.patch  temp  TestFloat-2a
 TestFloat-powerpc-E500v2-SPE-1.patch
 Yocto-replace-COMPILE_PREFIX-gcc.patch

$ bitbake -e testfloat | grep "^WORKDIR"
WORKDIR="/sdk/QorIQ-SDK-V1.3-20121114-yocto/build_p2020rdb_release/tmp/work/ppce500v2-fsl-linux-gnuspe/testfloat-2a-r1"

$ bitbake -e testfloat | grep "^S="
S="/sdk/QorIQ-SDK-V1.3-20121114-yocto/build_p2020rdb_release/tmp/work/ppce500v2-fsl-linux-gnuspe/testfloat-2a-r1/TestFloat-2a"


The problem is actually coming in do_unpack2.

Reg,
Gopi Krishnan S

On Mon, Dec 24, 2012 at 9:42 AM, Luo Zhenhua-B19537 <B19537 at freescale.com>wrote:

>  Krishnan,****
>
> ** **
>
> Can you re-run below commands and provide output on the terminal?****
>
> ** **
>
> $ bitbake testfloat -c cleansstate****
>
> $ bitbake testfloat -c unpack****
>
> $ ls tmp/work/ppce500v2-fsl-linux-gnuspe/testfloat-2a-r1/****
>
> $ bitbake -e testfloat | grep "^WORKDIR="****
>
> $ bitbake -e testfloat | grep "^S="****
>
> ** **
>
> ** **
>
> Best Regards,****
>
> ** **
>
> Zhenhua****
>
> ** **
>
> *From:* meta-freescale-bounces at yoctoproject.org [mailto:
> meta-freescale-bounces at yoctoproject.org] *On Behalf Of *GOPIKRISHNAN S
> *Sent:* Saturday, December 22, 2012 6:33 PM
> *To:* Liu Ting-B28495
> *Cc:* meta-freescale at yoctoproject.org
> *Subject:* Re: [meta-freescale] QorIQ SDK 1.3 P2020rdb Error****
>
> ** **
>
> Hi, ****
>
> File files estfloat-2a-r1 and SoftFloat-2b are available under
> QorIQ-SDK-V1.3-20121114-yocto/sources/. Even with bitbake -c cleansstate
> testfloat I get same error. I also tried "-c cleanall"; still same
> problem persist. I tried on my new installation of SDK, which also stops at
> same problem.
>
> - Krishnan****
>
>
> Happy Christmas & New Year. ****
>
> On Sat, Dec 22, 2012 at 9:46 AM, Liu Ting-B28495 <B28495 at freescale.com>
> wrote:****
>
> Hello,****
>
>  ****
>
> Could you please check if the below two files exist under
> QorIQ-SDK-V1.3-20121114-yocto/sources/:****
>
> SoftFloat-2b.tar.Z and TestFloat-2a.tar.Z****
>
>  ****
>
> If yes, then run ‘bitbake -c cleansstate testfloat’ to clean previous
> build and restart again.****
>
>  ****
>
> Not sure what happened. But ‘testfloat-2a-r1/SoftFloat-2b' is supposed to
> be there if do_fetch and do_unpack run successfully.****
>
>  ****
>
> -Ting****
>
>  ****
>
> *From:* meta-freescale-bounces at yoctoproject.org [mailto:
> meta-freescale-bounces at yoctoproject.org] *On Behalf Of *GOPIKRISHNAN S
> *Sent:* Friday, December 21, 2012 11:14 PM
> *To:* meta-freescale at yoctoproject.org
> *Subject:* [meta-freescale] QorIQ SDK 1.3 P2020rdb Error****
>
>  ****
>
> I was just trying to do a fsl-image-core for P2020rdb
>
> just running fsl-image-core gave all these error...
>
> NOTE: package testfloat-2a-r1: task do_unpack2: Started
> NOTE: Running task 814 of 1929 (ID: 612,
> /media/sdk/3.1/QorIQ-SDK-V1.3-20121114-yocto/meta-fsl-ppc-private/recipes-bad/fsl-pme/
> fsl-pme_1.0.3.bb, do_fetch)
> ERROR: Function failed: do_unpack2 (see
> /media/sdk/3.1/QorIQ-SDK-V1.3-20121114-yocto/build_p2020rdb_release/tmp/work/ppce500v2-fsl-linux-gnuspe/testfloat-2a-r1/temp/log.do_unpack2.22018
> for further information)
> ERROR: Logfile of failure stored in:
> /media/sdk/3.1/QorIQ-SDK-V1.3-20121114-yocto/build_p2020rdb_release/tmp/work/ppce500v2-fsl-linux-gnuspe/testfloat-2a-r1/temp/log.do_unpack2.22018
> Log data follows:
> | ERROR: Function failed: do_unpack2 (see
> /media/sdk/3.1/QorIQ-SDK-V1.3-20121114-yocto/build_p2020rdb_release/tmp/work/ppce500v2-fsl-linux-gnuspe/testfloat-2a-r1/temp/log.do_unpack2.22018
> for further information)
> | mv: cannot stat
> `/media/sdk/3.1/QorIQ-SDK-V1.3-20121114-yocto/build_p2020rdb_release/tmp/work/ppce500v2-fsl-linux-gnuspe/testfloat-2a-r1/SoftFloat-2b':
> No such file or directory
> NOTE: package testfloat-2a-r1: task do_unpack2: Failed
> NOTE: package linux-qoriq-sdk-headers-3.0.48-r5: task do_populate_lic:
> Started
> ERROR: Task 619
> (/media/sdk/3.1/QorIQ-SDK-V1.3-20121114-yocto/meta-fsl-ppc/recipes-test/testfloat/
> testfloat_2a.bb, do_unpack2) failed with exit code '1'
> Waiting for 2 running tasks to finish:
> 0: linux-qoriq-sdk-headers-3.0.48-r5 do_configure (pid 22019)
> 1: linux-qoriq-sdk-headers-3.0.48-r5 do_populate_lic (pid 22020)
> NOTE: package fsl-pme-1.0.3-r0: task do_fetch: Started
> Waiting for 3 running tasks to finish:
> 0: linux-qoriq-sdk-headers-3.0.48-r5 do_configure (pid 22019)
> 1: linux-qoriq-sdk-headers-3.0.48-r5 do_populate_lic (pid 22020)
> 2: fsl-pme-1.0.3-r0 do_fetch (pid 22029)
> NOTE: package linux-qoriq-sdk-headers-3.0.48-r5: task do_populate_lic:
> Succeeded
> Waiting for 2 running tasks to finish:
> 0: linux-qoriq-sdk-headers-3.0.48-r5 do_configure (pid 22019)
> 1: fsl-pme-1.0.3-r0 do_fetch (pid 22029)
> NOTE: package fsl-pme-1.0.3-r0: task do_fetch: Succeeded
> Waiting for 1 running tasks to finish:
> 0: linux-qoriq-sdk-headers-3.0.48-r5 do_configure (pid 22019)
> NOTE: package linux-qoriq-sdk-headers-3.0.48-r5: task do_configure:
> Succeeded
> NOTE: Tasks Summary: Attempted 814 tasks of which 807 didn't need to be
> rerun and 1 failed.
>
> Summary: 1 task failed:
>
> /media/sdk/3.1/QorIQ-SDK-V1.3-20121114-yocto/meta-fsl-ppc/recipes-test/testfloat/
> testfloat_2a.bb, do_unpack2****
>
> ** **
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/meta-freescale/attachments/20121227/ea4044fc/attachment.html>