[meta-freescale] [meta-fsl-arm-extra][PATCH v3 3/3] nitrogen6x: Add machine definition
Otavio Salvador
otavio at ossystems.com.br
Wed Dec 12 09:26:05 PST 2012
On Wed, Dec 12, 2012 at 3:20 PM, Eric Nelson
<eric.nelson at boundarydevices.com> wrote:
>
> On 12/12/2012 09:23 AM, Otavio Salvador wrote:
>>
>> On Wed, Dec 12, 2012 at 2:13 PM, Eric Nelson <
>> eric.nelson at boundarydevices.com> wrote:
>>>>>
>>>>>
>>>>> information)
>>>>>
>>>>> Either removing this line or setting it to "u-boot" allows the
>>>>> build to complete.
>>>>>
>>>>>
>>>> You forgot to add the patches for meta-fsl-arm ;-)
>>>>
>>>>
>>> Thanks Otavio.
>>>
>>> That did the trick.
>>>
>>
>> Can you give it a general test and send us the feedback? Has it worked out
>> of box? I'd like to merge those patches.
>>
>
> Hi Otavio,
>
> While still puzzled about how the parts fit together here, I
> can confirm that builds of core-image-minimal and fsl-image-test
> both produce bootable and very functional SD cards for the Nitrogen6X.
>
> The kernel image provided is detecting the board as a Nitrogen6X:
>
> root at nitrogen6x:/unit_tests# dmesg | grep Nitrogen
> ------------ Board type Nitrogen6X/W
>
> I've tested audio output through the SGTL5000:
> root at nitrogen6x:/unit_tests# gplay audio8k16S.wav
> playbin2 is employed!
> fsl_player_init(): Successfully initialize!
> ...
>
> The Wi-Fi adapter is also properly loading firmware:
> root at nitrogen6x:/unit_tests# ifconfig wlan0
> wlan0 Link encap:Ethernet HWaddr DE:AD:BE:EF:00:00
> UP BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
>
> The bad mac address is expected because the firmware file hasn't
> been programmed for this device.
>
> The wlan0 device is operating properly as shown by iwlist:
>
> root at nitrogen6x:/unit_tests# iwlist wlan0 scan | grep SSID
> ESSID:"golfcourse"
> ESSID:"ADVANCEDMFG"
> ESSID:"TealBear"
>
> I think that this proves out the basic functionality of your patch set.
>
> Many thanks!
Good :-)
I am happy to see everything (basic) is working fine.
Please ask if you're in doubt about any specific thing. I can try to
help or give you pointers to look at...
--
Otavio Salvador O.S. Systems
E-mail: otavio at ossystems.com.br http://www.ossystems.com.br
Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
More information about the meta-freescale
mailing list