[linux-yocto] : [yocto-4.18]: intel-socfpga: kernel patches
Li, Meng
Meng.Li at windriver.com
Fri Oct 12 16:03:48 PDT 2018
Hi Bruce,
My pull request have been at the end of this email thread.
The head part of pull request as below.
I push these patches into https://github.com/limeng-linux/linux-yocto-4.18.git, on branch v4.18/standard/intel-socfpga. A public repo.
Can you access them?
Or I need to send pull request with other style?
The following changes since commit 0cdc8564c61958a39704d97e008120bd7c762f60:
Merge tag 'v4.18.9' into v4.18/standard/base (2018-09-21 11:13:02 -0400)
are available in the git repository at:
https://github.com/limeng-linux/linux-yocto-4.18.git v4.18/standard/intel-socfpga
for you to fetch changes up to a0fe17724f45667d757cdf29d20030ff21ca1491:
spi-nor: add support for mx25u51245g (2018-10-10 00:31:57 -0700)
thanks ,
Limeng
> -----Original Message-----
> From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com]
> Sent: Friday, October 12, 2018 10:36 PM
> To: Li, Meng
> Cc: linux-yocto at yoctoproject.org
> Subject: Re: [linux-yocto]: [yocto-4.18]: intel-socfpga: kernel patches
>
> On 10/10/2018 09:49 PM, Meng.Li at windriver.com wrote:
> > From: Limeng <Meng.Li at windriver.com>
> >
> >
> > Hi Bruce,
> >
> > I am working on BSP intel-socfpga.
> >
> > Could you please help to create branch "v4.18/standard/intel-socfpga" in
> linux-yocto kernel?
> > And then merge these kernel patches into this branch.
>
> I created the branch, but the patches never came through. Is there
> somewhere you can stage them, and then send a pull request ?
>
> Bruce
>
> >
> > I verify these patches on Intel-PSG stratix10 development board.
> > Boot up log as below:
> >
> > Starting kernel ...
> >
> > Booting Linux on physical CPU 0x0000000000 [0x410fd034]
> > Linux version 4.18.9-yoctodev-standard (oe-user at oe-host) (gcc version
> 8.2.0 (GCC)) #1 SMP PREEMPT Sat Sep 29 10:47:46 UTC 2018
> > Machine model: SoCFPGA Stratix 10 SoCDK
> > earlycon: uart0 at MMIO32 0x00000000ffc02000 (options '115200n8')
> > bootconsole [uart0] enabled
> > efi: Getting EFI parameters from FDT:
> > efi: UEFI not found.
> > Reserved memory: created DMA memory pool at 0x0000000000000000,
> size 16 MiB
> > OF: reserved mem: initialized node svcbuffer at 0, compatible id shared-
> dma-pool
> > cma: Reserved 16 MiB at 0x000000007e800000
> > psci: probing for conduit method from DT.
> > psci: PSCIv65535.65535 detected in firmware.
> > psci: Using standard PSCI v0.2 function IDs
> > psci: MIGRATE_INFO_TYPE not supported.
> > psci: SMC Calling Convention v1.0
> > random: get_random_bytes called from start_kernel+0x9c/0x458 with
> crng_init=0
> > percpu: Embedded 23 pages/cpu @(____ptrval____) s53784 r8192 d32232
> u94208
> > Detected VIPT I-cache on CPU0
> > CPU features: enabling workaround for ARM erratum 845719
> > CPU features: detected: Kernel page table isolation (KPTI)
> > Built 1 zonelists, mobility grouping on. Total pages: 512064
> > Kernel command line: console=ttyS0,115200n8 earlycon root=/dev/nfs rw
> no_console_suspend rootwait
> nfsroot=128.224.162.206:/home/wrsadmin/Project/Native/nfsroot/intel-
> stratix10-1018,v3,p
> > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> > Memory: 2011824K/2080768K available (9276K kernel code, 1060K rwdata,
> 4192K rodata, 960K init, 649K bss, 52560K reserved, 16384K cma-reserved)
> > SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> > ftrace: allocating 31531 entries in 124 pages
> > Preemptible hierarchical RCU implementation.
> > Tasks RCU enabled.
> > NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> > GIC: Using split EOI/Deactivate mode
> > arch_timer: cp15 timer(s) running at 400.00MHz (phys).
> > clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
> 0x5c4093a7d1, max_idle_ns: 440795210635 ns
> > sched_clock: 56 bits at 400MHz, resolution 2ns, wraps every
> 4398046511103ns
> > Console: colour dummy device 80x25
> > Calibrating delay loop (skipped), value calculated using timer frequency..
> 800.00 BogoMIPS (lpj=1600000)
> > pid_max: default: 32768 minimum: 301
> > Security Framework initialized
> > Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
> > Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
> > ASID allocator initialised with 32768 entries
> > Hierarchical SRCU implementation.
> > EFI services will not be available.
> > smp: Bringing up secondary CPUs ...
> > Detected VIPT I-cache on CPU1
> > CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
> > Detected VIPT I-cache on CPU2
> > CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
> > Detected VIPT I-cache on CPU3
> > CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
> > smp: Brought up 1 node, 4 CPUs
> > SMP: Total of 4 processors activated.
> > CPU features: detected: 32-bit EL0 Support
> > CPU: All CPU(s) started at EL2
> > alternatives: patching kernel code
> > devtmpfs: initialized
> > clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
> 7645041785100000 ns
> > futex hash table entries: 1024 (order: 4, 65536 bytes)
> > xor: measuring software checksum speed
> > 8regs : 1967.000 MB/sec
> > 8regs_prefetch: 1701.000 MB/sec
> > 32regs : 2255.000 MB/sec
> > 32regs_prefetch: 1912.000 MB/sec
> > xor: using function: 32regs (2255.000 MB/sec)
> > DMI not present or invalid.
> > NET: Registered protocol family 16
> > cpuidle: using governor ladder
> > vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
> > hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
> > DMA: preallocated 256 KiB pool for atomic allocations
> > raid6: int64x1 gen() 381 MB/s
> > raid6: int64x1 xor() 380 MB/s
> > raid6: int64x2 gen() 583 MB/s
> > raid6: int64x2 xor() 504 MB/s
> > raid6: int64x4 gen() 833 MB/s
> > raid6: int64x4 xor() 618 MB/s
> > raid6: int64x8 gen() 980 MB/s
> > raid6: int64x8 xor() 635 MB/s
> > raid6: neonx1 gen() 625 MB/s
> > raid6: neonx1 xor() 732 MB/s
> > raid6: neonx2 gen() 959 MB/s
> > raid6: neonx2 xor() 975 MB/s
> > raid6: neonx4 gen() 1263 MB/s
> > raid6: neonx4 xor() 1180 MB/s
> > raid6: neonx8 gen() 1291 MB/s
> > raid6: neonx8 xor() 1205 MB/s
> > raid6: using algorithm neonx8 gen() 1291 MB/s
> > raid6: .... xor() 1205 MB/s, rmw enabled
> > raid6: using neon recovery algorithm
> > vgaarb: loaded
> > Intel Service Layer Driver Initialized
> > SCSI subsystem initialized
> > usbcore: registered new interface driver usbfs
> > usbcore: registered new interface driver hub
> > usbcore: registered new device driver usb
> > usb_phy_generic soc:usbphy at 0: soc:usbphy at 0 supply vcc not found,
> using dummy regulator
> > pps_core: LinuxPPS API ver. 1 registered
> > pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
> <giometti at linux.it>
> > PTP clock support registered
> > EDAC MC: Ver: 3.0.0
> > FPGA manager framework
> > clocksource: Switched to clocksource arch_sys_counter
> > NET: Registered protocol family 2
> > tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
> > TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> > TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
> > TCP: Hash tables configured (established 16384 bind 16384)
> > UDP hash table entries: 1024 (order: 3, 32768 bytes)
> > UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
> > NET: Registered protocol family 1
> > RPC: Registered named UNIX socket transport module.
> > RPC: Registered udp transport module.
> > RPC: Registered tcp transport module.
> > RPC: Registered tcp NFSv4.1 backchannel transport module.
> > hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters
> available
> > workingset: timestamp_bits=46 max_order=19 bucket_order=0
> > NFS: Registering the id_resolver key type
> > Key type id_resolver registered
> > Key type id_legacy registered
> > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
> > io scheduler noop registered
> > io scheduler deadline registered
> > io scheduler cfq registered (default)
> > io scheduler mq-deadline registered
> > io scheduler kyber registered
> > dma-pl330 ffda0000.pdma: Loaded driver for PL330 DMAC-341330
> > dma-pl330 ffda0000.pdma: DBUFF-512x8bytes Num_Chans-8
> Num_Peri-32 Num_Events-8
> > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> > console [ttyS0] disabled
> > ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 25, base_baud = 6250000)
> is a 16550A
> > console [ttyS0] enabled
> > console [ttyS0] enabled
> > bootconsole [uart0] disabled
> > bootconsole [uart0] disabled
> > cacheinfo: Unable to detect cache hierarchy for CPU 0
> > brd: module loaded
> > cadence-qspi ff8d2000.spi: mt25qu02g (262144 Kbytes)
> > 2 fixed-partitions partitions found on MTD device ff8d2000.spi.0
> > Creating 2 MTD partitions on "ff8d2000.spi.0":
> > 0x000000910000-0x000004000000 : "Boot and fpga data"
> > 0x000004000000-0x000008000000 : "Root Filesystem - JFFS2"
> > libphy: Fixed MDIO Bus: probed
> > socfpga-dwmac ff800000.ethernet: PTP uses main clock
> > socfpga-dwmac ff800000.ethernet: No sysmgr-syscon node found
> > socfpga-dwmac ff800000.ethernet: Unable to parse OF data
> > stmmaceth ff800000.ethernet: PTP uses main clock
> > stmmaceth ff800000.ethernet: User ID: 0x11, Synopsys ID: 0x37
> > stmmaceth ff800000.ethernet: DWMAC1000
> > stmmaceth ff800000.ethernet: DMA HW capability register supported
> > stmmaceth ff800000.ethernet: RX Checksum Offload Engine supported
> > stmmaceth ff800000.ethernet: COE Type 2
> > stmmaceth ff800000.ethernet: TX Checksum insertion supported
> > stmmaceth ff800000.ethernet: Enhanced/Alternate descriptors
> > stmmaceth ff800000.ethernet: Enabled extended descriptors
> > stmmaceth ff800000.ethernet: Ring mode enabled
> > stmmaceth ff800000.ethernet: Enable RX Mitigation via HW Watchdog
> Timer
> > libphy: stmmac: probed
> > dwc2 ffb00000.usb: ffb00000.usb supply vusb_d not found, using dummy
> regulator
> > dwc2 ffb00000.usb: ffb00000.usb supply vusb_a not found, using dummy
> regulator
> > dwc2 ffb00000.usb: dwc2_check_params: Invalid parameter lpm=1
> > dwc2 ffb00000.usb: dwc2_check_params: Invalid parameter
> lpm_clock_gating=1
> > dwc2 ffb00000.usb: dwc2_check_params: Invalid parameter besl=1
> > dwc2 ffb00000.usb: dwc2_check_params: Invalid parameter
> hird_threshold_en=1
> > dwc2 ffb00000.usb: EPs: 16, dedicated fifos, 8064 entries in SPRAM
> > dwc2 ffb00000.usb: DWC OTG Controller
> > dwc2 ffb00000.usb: new USB bus registered, assigned bus number 1
> > dwc2 ffb00000.usb: irq 26, io mem 0xffb00000
> > hub 1-0:1.0: USB hub found
> > hub 1-0:1.0: 1 port detected
> > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > ehci-pci: EHCI PCI platform driver
> > ehci-platform: EHCI generic platform driver
> > usbcore: registered new interface driver usb-storage
> > i2c /dev entries driver
> > device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-
> devel at redhat.com
> > EDAC MC0: Giving out device to module altera_edac controller
> soc:eccmgr:sdramedac: DEV soc:eccmgr:sdramedac (INTERRUPT)
> > sdhci: Secure Digital Host Controller Interface driver
> > sdhci: Copyright(c) Pierre Ossman
> > Synopsys Designware Multimedia Card Interface Driver
> > dw_mmc ff808000.dwmmc0: IDMAC supports 32-bit address mode.
> > dw_mmc ff808000.dwmmc0: Using internal DMA controller.
> > dw_mmc ff808000.dwmmc0: Version ID is 280a
> > dw_mmc ff808000.dwmmc0: DW MMC controller at irq 11,32 bit host data
> width,1024 deep fifo
> > mmc_host mmc0: card is polling.
> > mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz,
> actual 396825HZ div = 63)
> > sdhci-pltfm: SDHCI platform and OF driver helper
> > usbcore: registered new interface driver usbhid
> > usbhid: USB HID core driver
> > fpga_manager fpga0: Stratix10 SOC FPGA Manager registered
> > u32 classifier
> > Actions configured
> > NET: Registered protocol family 10
> > Segment Routing with IPv6
> > sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
> > NET: Registered protocol family 17
> > Key type dns_resolver registered
> > Btrfs loaded, crc32c=crc32c-generic
> > Key type encrypted registered
> > Unable to create integrity sysfs dir: -19
> > at24 1-0051: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
> > rtc-ds1307 1-0068: SET TIME!
> > rtc-ds1307 1-0068: registered as rtc0
> > of-fpga-region soc:base_fpga_region: FPGA Region probed
> > console [netcon0] enabled
> > netconsole: network logging started
> > rtc-ds1307 1-0068: setting system clock to 2000-01-01 00:00:20 UTC
> (946684820)
> > mmc0: Problem switching card into high-speed mode!
> > of_cfs_init
> > mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz,
> actual 25000000HZ div = 1)
> > of_cfs_init: OK
> > mmc0: new SDHC card at address 0001
> > stmmaceth ff800000.ethernet eth0: device MAC address 1e:74:20:d9:47:18
> > mmcblk0: mmc0:0001 SD16G 14.6 GiB
> > mmcblk0: p1 p2
> > Micrel KSZ9031 Gigabit PHY stmmac-0:04: attached PHY driver [Micrel
> KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:04, irq=POLL)
> > stmmaceth ff800000.ethernet eth0: No Safety Features support found
> > stmmaceth ff800000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp
> supported
> > stmmaceth ff800000.ethernet eth0: registered PTP clock
> > IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> > stmmaceth ff800000.ethernet eth0: Link is Up - 100Mbps/Full - flow control
> rx/tx
> > IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> > Sending DHCP requests ., OK
> > IP-Config: Got DHCP answer from 128.224.162.1, my address is
> 128.224.162.150
> > IP-Config: Complete:
> > device=eth0, hwaddr=1e:74:20:d9:47:18, ipaddr=128.224.162.150,
> mask=255.255.254.0, gw=128.224.162.1
> > host=128.224.162.150, domain=corp.ad.wrs.com, nis-domain=swamp
> > bootserver=0.0.0.0, rootserver=128.224.162.206, rootpath=
> > nameserver0=128.224.160.11, nameserver1=128.224.160.12,
> nameserver2=147.11.57.128
> > ttyS0 - failed to request DMA
> > md: Waiting for all devices to be available before autodetect
> > md: If you don't use raid, use raid=noautodetect
> > md: Autodetecting RAID arrays.
> > md: autorun ...
> > md: ... autorun DONE.
> > VFS: Mounted root (nfs filesystem) on device 0:15.
> > devtmpfs: mounted
> > Freeing unused kernel memory: 960K
> > random: fast init done
> > systemd[1]: System time before build time, advancing clock.
> > systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX
> +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -
> GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD)
> > systemd[1]: Detected architecture arm64.
> >
> > Welcome to Wind River Linux development 18.36 Update 0!
> >
> > root at intel-socfpga-64:~#
> >
> >
> > The following changes since commit
> 0cdc8564c61958a39704d97e008120bd7c762f60:
> >
> > Merge tag 'v4.18.9' into v4.18/standard/base (2018-09-21 11:13:02 -0400)
> >
> > are available in the git repository at:
> >
> > https://github.com/limeng-linux/linux-yocto-4.18.git
> v4.18/standard/intel-socfpga
> >
> > for you to fetch changes up to a0fe17724f45667d757cdf29d20030ff21ca1491:
> >
> > spi-nor: add support for mx25u51245g (2018-10-10 00:31:57 -0700)
> >
> > ----------------------------------------------------------------
> > Alan Tull (28):
> > FogBugz #84276: lcd driver on i2c
> > FogBugz #100586: Set lcd backlight brightness to max
> > FogBugz #102358: i2c newhaven lcd driver uses faulty hyphen
> > FogBugz #107683: handle backspace better in lcd driver
> > FogBugz #114479: load custom character for backslash
> > FogBugz #118160: support tilde character on newhaven lcd module
> > FogBugz #125882: lcd module needs time to process commands.
> > FogBugz #101176: add sys entry to set lcd module brightness
> > FogBugz #299928: arria10 swvp: add device tree
> > FogBugz #365525-3: socfpga: dts: remove fpga image specific info
> > FogBugz #398879-1: fpga: doc: documentation for FPGA debugfs
> > FogBugz #398879-2: fpga mgr debugfs
> > FogBugz #405628-1: fpga: doc: add config complete timeout
> > FogBugz #411427: fpga: memory leaks in fpga manager debugfs
> > FogBugz #412211: fpga: fix fpga mgr debugfs for module
> > FogBugz #458420-1: dts: arria10 socdk: add max1619
> > FogBugz #458420-2: ARM: dts: add lcd character panel
> > FogBugz #196859: tty: newhaven_lcd: make local struct static
> > dt-bindings: fpga: add Stratix10 SoC FPGA manager binding
> > fpga: add intel stratix10 soc fpga manager driver
> > arm64: dts: stratix10: add fpga manager and region
> > FogBugz #536772: tty: newhaven_lcd: fix klocwork complaints
> > FogBugz #536771: fpga: bridge: fix klocwork sprintf complaint
> > FogBugz #554812: fpga: stratix10: unitialized data
> > FogBugz #568392: fpga mgr debugfs: update to use current upstream
> api
> > FogBugz #568760-1: fpga: stratix10 soc: comparison of unsigned against
> zero
> > FogBugz #568760-2: fpga: stratix10-soc: remedy static code analysis
> error
> > arm64: dts: stratix10: i2c clock running out of spec
> >
> > Chris Rauer (1):
> > FogBugz #177284: add Altera VIP framebuffer driver
> >
> > David Koltak (3):
> > FogBugz #554835-1: Add Stratix 10 SoC RSU Driver
> > FogBugz #554835-3: Intel RSU binding documentation
> > FogBugz #571233: Remove sprintf in intel-rsu driver
> >
> > Dinh Nguyen (17):
> > clk: socfpga: stratix10: fix the parents of mpu_free_clk
> > clk: socfpga: stratix10: fix the sdmmc_free_clk mux
> > ARM: socfpga: Turn on ARM errata for L2 cache
> > FogBugz #184646: Turn on all peripheral clocks for a system reboot
> > tty: newhaven_lcd: Remove devinit and devexit
> > FogBugz #240546: Move VIP driver into FB hardware folder
> > misc: hwmutex: replace devm_request_and_ioremap with
> devm_ioremap_resource
> > misc: sysid: replace devm_request_and_ioremap with
> devm_ioremap_and_resource
> > misc: ilc: replace devm_request_and_ioremap with
> devm_ioremap_and_resource
> > FogBugz #236669: Add a Kconfig for ILC driver
> > FogBugz #184650: Cleanup Altera license headers.
> > FogBugz #488851: dts: use spin-table for SMP
> > FogBugz #491251: temporary remove PSCI node
> > arm64: dts: stratix10: Use PSCI spin-table for SMP
> > arm64: dts: stratix10: Use PSCI node instead of spin-table for SMP
> > arm64: dts: stratix10: fill in clocks field for usb and watchdog
> > arm64: dts: stratix10: add OCP reset property for ethernet
> >
> > Fengguang Wu (1):
> > FogBugz #229601: newhaven lcd: fix kbuild test robot warnings
> >
> > Graham Moore (5):
> > FogBugz #172665: Sample driver for DMA transfer to FPGA soft IP (FIFO)
> > TRCom NAND board device tree.
> > FogBugz #284482-1: A10 cache coherency is different than A5/C5.
> > FogBugz #284482-2: A10 cache coherency is different than A5/C5.
> > FogBugz #468942-2: Modify QSPI read_delay for Arria10.
> >
> > Ley Foon Tan (9):
> > FogBugz #143478: arch/arm: Move sysid from arch to drivers
> > FogBugz #138162: Add Altera hardware mutex driver
> > FogBugz #143451: Fix mutex compatible string
> > FogBugz #144109: Remove extra lines from license header
> > FogBugz #143478: drivers/misc: Move sysid from arch to drivers
> > misc: hwmutex: use IS_ERR and PTR_ERR to check for error
> > misc: sysid: use IS_ERR and PTR_ERR to check for error
> > FogBugz #331067: misc: altera_hwmutex: remove .owner
> > FogBugz #331066: misc: altera_hwmutex: remove redundant unused
> of_match_ptr
> >
> > Limeng (3):
> > arm64: dts: add dts for updating FPGA configure
> > intel-socfpga: dts: add rsu node to enable rsu driver
> > intel-socfpga: dts: improve qspi node for rsu feature
> >
> > Marian Florea (2):
> > spi-nor: add support for mx66u2g45g
> > spi-nor: add support for mx25u51245g
> >
> > Matthew Gerlach (6):
> > FogBugz #408205: fix printf format error
> > FogBugz #404467: add missing binding documentation
> > FogBugz #403389-1: Altera Partial Reconfiguration IP Core
> > FogBugz #421690: use a unique name to register freeze controller
> > FogBugz #408870: add debugfs interface for fpga config complete
> timeout
> > FogBugz #374571: Fix Sysid driver hotplug support.
> >
> > MengLi (7):
> > arm64: dts: stratix10: enable qspi feature
> > arm64: dts: stratix10: control FPGA IO from linux kernel
> > arm64: dts: stratix10: correct PMU interrupt number
> > drivers: ethernet: stmmac: set delay_us value as 0
> > drivers: ethernet: stmmac: improve phy control during ethernet
> suspend/resume
> > drivers: ethernet: stmmac: keep Ethernet clock in enable status on
> Stratix10 platform
> > driver: misc: intel-service: schedule thread out when there is no data
> reveived
> >
> > Pantelis Antoniou (1):
> > OF: DT-Overlay configfs interface (v7)
> >
> > Richard Gong (15):
> > FogBugz #454145: Update stratix10_swvp.dts file for S10 SoC VP
> > FogBugz #470512: Update stratix10_swvp.dts file for S10 SoC Simics/VP
> > Revert "FogBugz #470510: Update stratix10_swvp.dts file for S10 SoC
> Simics/VP"
> > dt-bindings, firmware: add Intel Stratix10 service layer binding
> > arm64: dts: stratix10: add service driver binding to base dtsi
> > driver, misc: add Intel Stratix10 service layer driver
> > driver, misc: enhance service layer for u-boot w/o SMC support
> > FogBugz #545807: driver, misc: increase timeout value for claiming back
> buf
> > FogBugz #559720: remove dummy client from service layer
> > FogBugz #559704-1: minimize service layer thread usage
> > FogBugz #559704-2: update S10 FPGA driver to align with changes at svc
> > FogBugz #559704-3: update RSU driver to align with changes at svc
> > FogBugz #568325: driver: misc: fix service layer klocwork errors
> > FogBugz #566902: driver: misc: change SVC to use
> kthread_create_on_node API
> > FogBugz #574552: misc: intel-service: resolve a possible memory
> exception
> >
> > Thor Thayer (8):
> > arm64: dts: stratix10: Add QSPI support for Stratix10
> > FogBugz #411698-2: Add Altera A10-SR power supply alarms
> > FogBugz #411698-3: hwmon: Add Altera A10-SR power supply alarms
> > FogBugz #532583-1: hwmon: Update A10SR HWMON register calls
> > FogBugz #532583-2: hwmon: Fix buffer calls for SDL compliance.
> > FogBugz #532583-3: mtd: a10sr: Add A10SR HWMON
> > FogBugz #411698-4: socfpga: dts: Add A10-SR Devkit power supply
> alarms
> > FogBugz #549288-1: misc: Stratix10 Protected register access defines
> >
> > Vince Bridgers (1):
> > devicetree: net: micrel-ksz90x1.txt: correct documentation
> >
> > Yves Vandervennet (4):
> > FogBugz #332657-1: Stratix 10 Software Virtual Platform
> > FogBugz #332657-2: Stratix 10 Software Virtual Platform
> > FogBugz #332965: missing Makefile to build Stratix10 SWVP dts
> > FogBugz #334039: enable SMP for the Stratix10 SWVP
> >
> > cnphoon (1):
> > FogBugz #178225: Add Altera interrupt latency counter driver
> >
> > Documentation/devicetree/bindings/arm/altera/fpga-dma.txt |
> 25 +++
> > Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt
> | 28 +++
> > Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
> | 57 ++++++
> > Documentation/devicetree/bindings/fpga/altera-partial-reconfig.txt
> | 12 ++
> > Documentation/devicetree/bindings/fpga/fpga-region.txt |
> 13 ++
> > Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-
> mgr.txt | 10 +
> > Documentation/devicetree/bindings/misc/altera-hwmutex.txt |
> 22 +++
> > Documentation/devicetree/bindings/misc/altera-interrupt-latency-
> counter.txt | 49 +++++
> > Documentation/devicetree/bindings/misc/altera_sysid.txt |
> 11 ++
> > Documentation/devicetree/bindings/net/micrel-ksz90x1.txt |
> 98 +++++++++-
> > Documentation/devicetree/bindings/tty/newhaven_lcd.txt |
> 21 ++
> > Documentation/devicetree/bindings/video/altvipfb.txt | 22
> +++
> > Documentation/devicetree/configfs-overlays.txt | 31 +++
> > Documentation/fpga/debugfs.txt | 39 ++++
> > arch/arm/boot/dts/Makefile | 2 +
> > arch/arm/boot/dts/socfpga.dtsi | 2 +-
> > arch/arm/boot/dts/socfpga_arria10.dtsi | 1 +
> > arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 17 ++
> > arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts | 2 +-
> > arch/arm/boot/dts/socfpga_arria10_swvp.dts | 542
> ++++++++++++++++++++++++++++++++++++++++++++++++++++
> > arch/arm/boot/dts/socfpga_arria5_socdk.dts | 8 +
> > arch/arm/boot/dts/socfpga_cyclone5_socdk.dts | 8 +
> > arch/arm/boot/dts/socfpga_cyclone5_trcom.dts | 150
> +++++++++++++++
> > arch/arm/mach-socfpga/Kconfig | 12 ++
> > arch/arm/mach-socfpga/Makefile | 1 +
> > arch/arm/mach-socfpga/core.h | 10 +-
> > arch/arm/mach-socfpga/fpga-dma.c | 689
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > arch/arm/mach-socfpga/socfpga.c | 8 +
> > arch/arm64/Kconfig.platforms | 5 +
> > arch/arm64/boot/dts/altera/Makefile | 3 +-
> > arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 83
> +++++++-
> > arch/arm64/boot/dts/altera/socfpga_stratix10_fpga_update.dts |
> 17 ++
> > arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 54
> ++++++
> > arch/arm64/boot/dts/altera/stratix10_swvp.dts | 763
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++
> > drivers/clk/socfpga/clk-s10.c | 8 +-
> > drivers/dma/pl330.c | 52 +++--
> > drivers/fpga/Kconfig | 20 ++
> > drivers/fpga/Makefile | 4 +-
> > drivers/fpga/altera-freeze-bridge.c | 4 +-
> > drivers/fpga/fpga-bridge.c | 4 +-
> > drivers/fpga/fpga-mgr-debugfs.c | 235
> +++++++++++++++++++++++
> > drivers/fpga/fpga-mgr-debugfs.h | 37 ++++
> > drivers/fpga/fpga-mgr.c | 8 +
> > drivers/fpga/stratix10-soc.c | 536
> +++++++++++++++++++++++++++++++++++++++++++++++++++
> > drivers/hwmon/Kconfig | 9 +
> > drivers/hwmon/Makefile | 1 +
> > drivers/hwmon/altera-a10sr-hwmon.c | 406
> +++++++++++++++++++++++++++++++++++++++
> > drivers/mfd/altera-a10sr.c | 4 +
> > drivers/misc/Kconfig | 41 ++++
> > drivers/misc/Makefile | 7 +-
> > drivers/misc/altera_hwmutex.c | 320
> +++++++++++++++++++++++++++++++
> > drivers/misc/altera_ilc.c | 299
> +++++++++++++++++++++++++++++
> > drivers/misc/altera_sysid.c | 141 ++++++++++++++
> > drivers/misc/intel-rsu.c | 387
> +++++++++++++++++++++++++++++++++++++
> > drivers/misc/intel-service.c | 1042
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> +++++++++++++++++++++++++++++++++
> > drivers/misc/intel-smc.h | 310
> ++++++++++++++++++++++++++++++
> > drivers/mtd/spi-nor/spi-nor.c | 2 +
> > drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 2 +-
> > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10
> +-
> > drivers/of/Kconfig | 8 +
> > drivers/of/Makefile | 1 +
> > drivers/of/configfs.c | 284
> +++++++++++++++++++++++++++
> > drivers/tty/Kconfig | 19 ++
> > drivers/tty/Makefile | 1 +
> > drivers/tty/newhaven_lcd.c | 636
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > drivers/video/Kconfig | 9 +
> > drivers/video/fbdev/Kconfig | 10 +
> > drivers/video/fbdev/Makefile | 1 +
> > drivers/video/fbdev/altvipfb.c | 303
> +++++++++++++++++++++++++++++
> > include/linux/altera_hwmutex.h | 41 ++++
> > include/linux/fpga/fpga-mgr.h | 3 +
> > include/linux/intel-service-client.h | 198
> +++++++++++++++++++
> > include/linux/mfd/altera-a10sr.h | 58 ++++++
> > 73 files changed, 8232 insertions(+), 44 deletions(-)
> > create mode 100644
> Documentation/devicetree/bindings/arm/altera/fpga-dma.txt
> > create mode 100644
> Documentation/devicetree/bindings/firmware/intel,stratix10-rsu.txt
> > create mode 100644
> Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
> > create mode 100644 Documentation/devicetree/bindings/fpga/altera-
> partial-reconfig.txt
> > create mode 100644 Documentation/devicetree/bindings/fpga/intel-
> stratix10-soc-fpga-mgr.txt
> > create mode 100644 Documentation/devicetree/bindings/misc/altera-
> hwmutex.txt
> > create mode 100644 Documentation/devicetree/bindings/misc/altera-
> interrupt-latency-counter.txt
> > create mode 100644
> Documentation/devicetree/bindings/misc/altera_sysid.txt
> > create mode 100644
> Documentation/devicetree/bindings/tty/newhaven_lcd.txt
> > create mode 100644
> Documentation/devicetree/bindings/video/altvipfb.txt
> > create mode 100644 Documentation/devicetree/configfs-overlays.txt
> > create mode 100644 Documentation/fpga/debugfs.txt
> > create mode 100644 arch/arm/boot/dts/socfpga_arria10_swvp.dts
> > create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_trcom.dts
> > create mode 100644 arch/arm/mach-socfpga/fpga-dma.c
> > create mode 100644
> arch/arm64/boot/dts/altera/socfpga_stratix10_fpga_update.dts
> > create mode 100644 arch/arm64/boot/dts/altera/stratix10_swvp.dts
> > create mode 100644 drivers/fpga/fpga-mgr-debugfs.c
> > create mode 100644 drivers/fpga/fpga-mgr-debugfs.h
> > create mode 100644 drivers/fpga/stratix10-soc.c
> > create mode 100644 drivers/hwmon/altera-a10sr-hwmon.c
> > create mode 100644 drivers/misc/altera_hwmutex.c
> > create mode 100644 drivers/misc/altera_ilc.c
> > create mode 100644 drivers/misc/altera_sysid.c
> > create mode 100644 drivers/misc/intel-rsu.c
> > create mode 100644 drivers/misc/intel-service.c
> > create mode 100644 drivers/misc/intel-smc.h
> > create mode 100644 drivers/of/configfs.c
> > create mode 100644 drivers/tty/newhaven_lcd.c
> > create mode 100644 drivers/video/fbdev/altvipfb.c
> > create mode 100644 include/linux/altera_hwmutex.h
> > create mode 100644 include/linux/intel-service-client.h
> >
> >
> >
> > Thanks,
> > Limeng
> >
More information about the linux-yocto
mailing list