[linux-yocto] [PATCH 1/2] iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
Yong Li
yong.b.li at intel.com
Tue Jun 21 00:52:29 PDT 2016
From: Joachim Eastwood <manabian at gmail.com>
Add support for Freescale MMA7455L/MMA7456L 3-axis in 10-bit mode for
I2C and SPI bus. This rather simple driver that currently doesn't
support all the hardware features of MMA7455L/MMA7456L.
Tested on Embedded Artist's LPC4357 Dev Kit with MMA7455L on I2C bus.
Data sheets for the two devices can be found here:
http://cache.freescale.com/files/sensors/doc/data_sheet/MMA7455L.pdf
http://cache.freescale.com/files/sensors/doc/data_sheet/MMA7456L.pdf
Upstream-Status: Backport[https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a84ef0d181d917125f1f16cffe53f84c19968969]
Signed-off-by: Joachim Eastwood <manabian at gmail.com>
Signed-off-by: Jonathan Cameron <jic23 at kernel.org>
Signed-off-by: Yong Li <yong.b.li at intel.com>
---
drivers/iio/accel/Kconfig | 29 ++++
drivers/iio/accel/Makefile | 5 +
drivers/iio/accel/mma7455.h | 19 +++
drivers/iio/accel/mma7455_core.c | 311 +++++++++++++++++++++++++++++++++++++++
drivers/iio/accel/mma7455_i2c.c | 56 +++++++
drivers/iio/accel/mma7455_spi.c | 52 +++++++
6 files changed, 472 insertions(+)
create mode 100644 drivers/iio/accel/mma7455.h
create mode 100644 drivers/iio/accel/mma7455_core.c
create mode 100644 drivers/iio/accel/mma7455_i2c.c
create mode 100644 drivers/iio/accel/mma7455_spi.c
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 16cc5c6..1f0ca53 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -107,6 +107,35 @@ config KXCJK1013
To compile this driver as a module, choose M here: the module will
be called kxcjk-1013.
+config MMA7455
+ tristate
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+
+config MMA7455_I2C
+ tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
+ depends on I2C
+ select MMA7455
+ select REGMAP_I2C
+ help
+ Say yes here to build support for the Freescale MMA7455L and
+ MMA7456L 3-axis accelerometer.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mma7455_i2c.
+
+config MMA7455_SPI
+ tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
+ depends on SPI_MASTER
+ select MMA7455
+ select REGMAP_SPI
+ help
+ Say yes here to build support for the Freescale MMA7455L and
+ MMA7456L 3-axis accelerometer.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mma7455_spi.
+
config MMA8452
tristate "Freescale MMA8452Q and similar Accelerometers Driver"
depends on I2C
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 7925f16..7ea21f8 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -10,6 +10,11 @@ obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
obj-$(CONFIG_KXSD9) += kxsd9.o
+
+obj-$(CONFIG_MMA7455) += mma7455_core.o
+obj-$(CONFIG_MMA7455_I2C) += mma7455_i2c.o
+obj-$(CONFIG_MMA7455_SPI) += mma7455_spi.o
+
obj-$(CONFIG_MMA8452) += mma8452.o
obj-$(CONFIG_MMA9551_CORE) += mma9551_core.o
diff --git a/drivers/iio/accel/mma7455.h b/drivers/iio/accel/mma7455.h
new file mode 100644
index 0000000..2b1152c
--- /dev/null
+++ b/drivers/iio/accel/mma7455.h
@@ -0,0 +1,19 @@
+/*
+ * IIO accel driver for Freescale MMA7455L 3-axis 10-bit accelerometer
+ * Copyright 2015 Joachim Eastwood <manabian at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MMA7455_H
+#define __MMA7455_H
+
+extern const struct regmap_config mma7455_core_regmap;
+
+int mma7455_core_probe(struct device *dev, struct regmap *regmap,
+ const char *name);
+int mma7455_core_remove(struct device *dev);
+
+#endif
diff --git a/drivers/iio/accel/mma7455_core.c b/drivers/iio/accel/mma7455_core.c
new file mode 100644
index 0000000..c633cc2
--- /dev/null
+++ b/drivers/iio/accel/mma7455_core.c
@@ -0,0 +1,311 @@
+/*
+ * IIO accel core driver for Freescale MMA7455L 3-axis 10-bit accelerometer
+ * Copyright 2015 Joachim Eastwood <manabian at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * UNSUPPORTED hardware features:
+ * - 8-bit mode with different scales
+ * - INT1/INT2 interrupts
+ * - Offset calibration
+ * - Events
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "mma7455.h"
+
+#define MMA7455_REG_XOUTL 0x00
+#define MMA7455_REG_XOUTH 0x01
+#define MMA7455_REG_YOUTL 0x02
+#define MMA7455_REG_YOUTH 0x03
+#define MMA7455_REG_ZOUTL 0x04
+#define MMA7455_REG_ZOUTH 0x05
+#define MMA7455_REG_STATUS 0x09
+#define MMA7455_STATUS_DRDY BIT(0)
+#define MMA7455_REG_WHOAMI 0x0f
+#define MMA7455_WHOAMI_ID 0x55
+#define MMA7455_REG_MCTL 0x16
+#define MMA7455_MCTL_MODE_STANDBY 0x00
+#define MMA7455_MCTL_MODE_MEASURE 0x01
+#define MMA7455_REG_CTL1 0x18
+#define MMA7455_CTL1_DFBW_MASK BIT(7)
+#define MMA7455_CTL1_DFBW_125HZ BIT(7)
+#define MMA7455_CTL1_DFBW_62_5HZ 0
+#define MMA7455_REG_TW 0x1e
+
+/*
+ * When MMA7455 is used in 10-bit it has a fullscale of -8g
+ * corresponding to raw value -512. The userspace interface
+ * uses m/s^2 and we declare micro units.
+ * So scale factor is given by:
+ * g * 8 * 1e6 / 512 = 153228.90625, with g = 9.80665
+ */
+#define MMA7455_10BIT_SCALE 153229
+
+struct mma7455_data {
+ struct regmap *regmap;
+ struct device *dev;
+};
+
+static int mma7455_drdy(struct mma7455_data *mma7455)
+{
+ unsigned int reg;
+ int tries = 3;
+ int ret;
+
+ while (tries-- > 0) {
+ ret = regmap_read(mma7455->regmap, MMA7455_REG_STATUS, ®);
+ if (ret)
+ return ret;
+
+ if (reg & MMA7455_STATUS_DRDY)
+ return 0;
+
+ msleep(20);
+ }
+
+ dev_warn(mma7455->dev, "data not ready\n");
+
+ return -EIO;
+}
+
+static irqreturn_t mma7455_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct mma7455_data *mma7455 = iio_priv(indio_dev);
+ u8 buf[16]; /* 3 x 16-bit channels + padding + ts */
+ int ret;
+
+ ret = mma7455_drdy(mma7455);
+ if (ret)
+ goto done;
+
+ ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL, buf,
+ sizeof(__le16) * 3);
+ if (ret)
+ goto done;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns());
+
+done:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static int mma7455_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct mma7455_data *mma7455 = iio_priv(indio_dev);
+ unsigned int reg;
+ __le16 data;
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
+ ret = mma7455_drdy(mma7455);
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_read(mma7455->regmap, chan->address, &data,
+ sizeof(data));
+ if (ret)
+ return ret;
+
+ *val = sign_extend32(le16_to_cpu(data), 9);
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ *val2 = MMA7455_10BIT_SCALE;
+
+ return IIO_VAL_INT_PLUS_MICRO;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = regmap_read(mma7455->regmap, MMA7455_REG_CTL1, ®);
+ if (ret)
+ return ret;
+
+ if (reg & MMA7455_CTL1_DFBW_MASK)
+ *val = 250;
+ else
+ *val = 125;
+
+ return IIO_VAL_INT;
+ }
+
+ return -EINVAL;
+}
+
+static int mma7455_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct mma7455_data *mma7455 = iio_priv(indio_dev);
+ int i;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ if (val == 250 && val2 == 0)
+ i = MMA7455_CTL1_DFBW_125HZ;
+ else if (val == 125 && val2 == 0)
+ i = MMA7455_CTL1_DFBW_62_5HZ;
+ else
+ return -EINVAL;
+
+ return regmap_update_bits(mma7455->regmap, MMA7455_REG_CTL1,
+ MMA7455_CTL1_DFBW_MASK, i);
+
+ case IIO_CHAN_INFO_SCALE:
+ /* In 10-bit mode there is only one scale available */
+ if (val == 0 && val2 == MMA7455_10BIT_SCALE)
+ return 0;
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static IIO_CONST_ATTR(sampling_frequency_available, "125 250");
+
+static struct attribute *mma7455_attributes[] = {
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group mma7455_group = {
+ .attrs = mma7455_attributes,
+};
+
+static const struct iio_info mma7455_info = {
+ .attrs = &mma7455_group,
+ .read_raw = mma7455_read_raw,
+ .write_raw = mma7455_write_raw,
+ .driver_module = THIS_MODULE,
+};
+
+#define MMA7455_CHANNEL(axis, idx) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .address = MMA7455_REG_##axis##OUTL,\
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .scan_index = idx, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 10, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+}
+
+static const struct iio_chan_spec mma7455_channels[] = {
+ MMA7455_CHANNEL(X, 0),
+ MMA7455_CHANNEL(Y, 1),
+ MMA7455_CHANNEL(Z, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const unsigned long mma7455_scan_masks[] = {0x7, 0};
+
+const struct regmap_config mma7455_core_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MMA7455_REG_TW,
+};
+EXPORT_SYMBOL_GPL(mma7455_core_regmap);
+
+int mma7455_core_probe(struct device *dev, struct regmap *regmap,
+ const char *name)
+{
+ struct mma7455_data *mma7455;
+ struct iio_dev *indio_dev;
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(regmap, MMA7455_REG_WHOAMI, ®);
+ if (ret) {
+ dev_err(dev, "unable to read reg\n");
+ return ret;
+ }
+
+ if (reg != MMA7455_WHOAMI_ID) {
+ dev_err(dev, "device id mismatch\n");
+ return -ENODEV;
+ }
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*mma7455));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, indio_dev);
+ mma7455 = iio_priv(indio_dev);
+ mma7455->regmap = regmap;
+ mma7455->dev = dev;
+
+ indio_dev->info = &mma7455_info;
+ indio_dev->name = name;
+ indio_dev->dev.parent = dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = mma7455_channels;
+ indio_dev->num_channels = ARRAY_SIZE(mma7455_channels);
+ indio_dev->available_scan_masks = mma7455_scan_masks;
+
+ regmap_write(mma7455->regmap, MMA7455_REG_MCTL,
+ MMA7455_MCTL_MODE_MEASURE);
+
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ mma7455_trigger_handler, NULL);
+ if (ret) {
+ dev_err(dev, "unable to setup triggered buffer\n");
+ return ret;
+ }
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ dev_err(dev, "unable to register device\n");
+ iio_triggered_buffer_cleanup(indio_dev);
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mma7455_core_probe);
+
+int mma7455_core_remove(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct mma7455_data *mma7455 = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ iio_triggered_buffer_cleanup(indio_dev);
+
+ regmap_write(mma7455->regmap, MMA7455_REG_MCTL,
+ MMA7455_MCTL_MODE_STANDBY);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mma7455_core_remove);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian at gmail.com>");
+MODULE_DESCRIPTION("Freescale MMA7455L core accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/mma7455_i2c.c b/drivers/iio/accel/mma7455_i2c.c
new file mode 100644
index 0000000..3cab5fb
--- /dev/null
+++ b/drivers/iio/accel/mma7455_i2c.c
@@ -0,0 +1,56 @@
+/*
+ * IIO accel I2C driver for Freescale MMA7455L 3-axis 10-bit accelerometer
+ * Copyright 2015 Joachim Eastwood <manabian at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "mma7455.h"
+
+static int mma7455_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct regmap *regmap;
+ const char *name = NULL;
+
+ regmap = devm_regmap_init_i2c(i2c, &mma7455_core_regmap);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ if (id)
+ name = id->name;
+
+ return mma7455_core_probe(&i2c->dev, regmap, name);
+}
+
+static int mma7455_i2c_remove(struct i2c_client *i2c)
+{
+ return mma7455_core_remove(&i2c->dev);
+}
+
+static const struct i2c_device_id mma7455_i2c_ids[] = {
+ { "mma7455", 0 },
+ { "mma7456", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mma7455_i2c_ids);
+
+static struct i2c_driver mma7455_i2c_driver = {
+ .probe = mma7455_i2c_probe,
+ .remove = mma7455_i2c_remove,
+ .id_table = mma7455_i2c_ids,
+ .driver = {
+ .name = "mma7455-i2c",
+ },
+};
+module_i2c_driver(mma7455_i2c_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian at gmail.com>");
+MODULE_DESCRIPTION("Freescale MMA7455L I2C accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/mma7455_spi.c b/drivers/iio/accel/mma7455_spi.c
new file mode 100644
index 0000000..79df8f2
--- /dev/null
+++ b/drivers/iio/accel/mma7455_spi.c
@@ -0,0 +1,52 @@
+/*
+ * IIO accel SPI driver for Freescale MMA7455L 3-axis 10-bit accelerometer
+ * Copyright 2015 Joachim Eastwood <manabian at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "mma7455.h"
+
+static int mma7455_spi_probe(struct spi_device *spi)
+{
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_spi(spi, &mma7455_core_regmap);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ return mma7455_core_probe(&spi->dev, regmap, id->name);
+}
+
+static int mma7455_spi_remove(struct spi_device *spi)
+{
+ return mma7455_core_remove(&spi->dev);
+}
+
+static const struct spi_device_id mma7455_spi_ids[] = {
+ { "mma7455", 0 },
+ { "mma7456", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, mma7455_spi_ids);
+
+static struct spi_driver mma7455_spi_driver = {
+ .probe = mma7455_spi_probe,
+ .remove = mma7455_spi_remove,
+ .id_table = mma7455_spi_ids,
+ .driver = {
+ .name = "mma7455-spi",
+ },
+};
+module_spi_driver(mma7455_spi_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian at gmail.com>");
+MODULE_DESCRIPTION("Freescale MMA7455L SPI accelerometer driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
More information about the linux-yocto
mailing list