[linux-yocto] [PULL REQUEST] add standard/bxt-rebase branch
Bruce Ashfield
bruce.ashfield at windriver.com
Thu Jun 2 17:19:33 PDT 2016
On 2016-06-01 5:03 PM, Tom Zanussi wrote:
> On 06/01/2016 12:50 PM, Tom Zanussi wrote:
>> On 06/01/2016 12:24 PM, Bruce Ashfield wrote:
>>> On 2016-06-01 1:21 PM, Tom Zanussi wrote:
>>>> On 06/01/2016 11:57 AM, Bruce Ashfield wrote:
>>>>> On 2016-06-01 12:56 PM, Tom Zanussi wrote:
>>>>>> On 06/01/2016 11:50 AM, Bruce Ashfield wrote:
>>>>>>> On 2016-06-01 11:36 AM, Saul Wold wrote:
>>>>>>>> On Tue, 2016-05-31 at 23:31 -0400, Bruce Ashfield wrote:
>>>>>>>>>
>>>>>>>>> On 2016-05-31 6:24 PM, Ranostay, Matt wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> This pull request is for adding the standard/bxt-rebase branch with
>>>>>>>>>> has various backports from 4.6 and 4.5, which are have an
>>>>>>>>>> unacceptable risk of breaking other platforms.
>>>>>>>>>> This is based on standard/intel and will be rebased. Thus nobody
>>>>>>>>>> should expect the history to be linear.
>>>>>>>>> Seems sane to me.
>>>>>>>>>
>>>>>>>>> One minor question though. To keep the branch naming and inheritance
>>>>>>>>> sane, I'd create this as standard/intel/bxt-rebase
>>>>>>>>>
>>>>>>>>> Any objections ?
>>>>>>>>>
>>>>>>>> This is actually what I had asked for (standard/intel/bxt-rebase)
>>>>>>>> so no
>>>>>>>> objections here.
>>>>>>>
>>>>>>> And crap. I wasn't thinking clearly when I created standard/intel,
>>>>>>> that
>>>>>>> now needs to become standard/intel/base.
>>>>>>>
>>>>>>> We'll run into the git fetch not being able to update local copies of
>>>>>>> the repo (unless they are full cleared).
>>>>>>>
>>>>>>> I typically do create these as /base .. but forgot this time.
>>>>>>>
>>>>>>> Tom: we need to coordinate KBRANCH updates .. how did you want to do
>>>>>>> that ?
>>>>>>>
>>>>>>
>>>>>> Hmm, I thought the plan was to have a standard/intel based on
>>>>>> standard/base, which is what we have...
>>>>>>
>>>>>> All this rebase stuff should be based on standard/intel, right?
>>>>>
>>>>> Yep, and if we want to show that inheritance properly, it shouldbve
>>>>> standard/intel/<rebase branch> .. that's the kicker.
>>>>>
>>>>
>>>> So why can't we do something like standard/intel-rebase-branch based on
>>>> standard/intel and avoid the problem, since these are supposed to be
>>>> temporary one-off staging branches anyway?
>>>
>>> I could live with standard/intel-rebase, it doesn't exactly match the
>>> inheritance notation .. but it is close enough.
>>>
>>
>> I think that's fine - the original intent was to have standard/intel,
>> standard/preempt/intel, etc, be THE common Intel branches for all (or
>> all who wanted to be) Intel BSPs to be based off of.
>>
>> It wasn't until later that it became apparent that some BSPs would
>> temporarily have a need for even more half-baked patches than could even
>> go into standard/*/intel, and the -rebase idea was introduced.
>>
>> So to me it doesn't seem appropriate for the half-baked stuff to drive
>> the overall cleanliness of the branch layout... But then it's not up to
>> me - the whole scheme was introduced to make it easier to satisfy our
>> 'customers' who would benefit from the more timely (if possibly
>> less-baked) platform support. If anyone objects to the intel-rebase vs
>> intel/rebase scheme, please speak up...
>>
>
> Actually, we also still need to do this for 4.6 now too. Considering
> that, and that we're going to run into the same git fetch problem in
> that case anyway, we might as well make it all completely consistent and
> do the standard/intel/base version throughout.
>
> If that works, Bruce, I can create a series to do that for all the
> kernel versions (4.1, 4.4, and 4.6). Make sense?
Just so I don't drop the ball on this. We might both be waiting for
the other :D
I can rename the branches at any time, since there aren't any references
to standard/intel in the recipes, we won't have a KBRANCH conflict.
The kernel-cache shouldn't even need any changes, since the tools know
how to handle foo and foo/base as the same thing.
Cheers,
Bruce
>
> Tom
>
>
>> Tom
>>
>>
>>> I've made a note to generate all future repos with /base
>>>
>>> Bruce
>>>
>>>>
>>>> Tom
>>>>
>>>>> Bruce
>>>>>
>>>>>>
>>>>>> Tom
>>>>>>
>>>>>>
>>>>>>> Bruce
>>>>>>>
>>>>>>>>
>>>>>>>> Sau!
>>>>>>>>
>>>>>>>>>
>>>>>>>>> Bruce
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> The following changes since commit
>>>>>>>>>> 53e84104c5e68eb468823dd0d262a64623d01a55:
>>>>>>>>>>
>>>>>>>>>> mmc: mmc: Fix partition switch timeout for some eMMCs (2016-05-
>>>>>>>>>> 19
>>>>>>>>>> 17:15:25 -0700)
>>>>>>>>>>
>>>>>>>>>> are available in the git repository at:
>>>>>>>>>>
>>>>>>>>>> git://sandbox.sakoman.com/linux-yocto-4.4.git standard/bxt-rebase
>>>>>>>>>>
>>>>>>>>>> for you to fetch changes up to
>>>>>>>>>> 1203930e034957e1fc9e0c4842ecd7922d5e0897:
>>>>>>>>>>
>>>>>>>>>> [UPSTREAM] ASoC: skylake: added WARN_ON invalid dsp (2016-05-27
>>>>>>>>>> 17:21:19 -0700)
>>>>>>>>>>
>>>>>>>>>> ----------------------------------------------------------------
>>>>>>>>>> Aaron Plattner (1):
>>>>>>>>>> ALSA: hda - Add new GPU codec ID 0x10de0083 to snd-hda
>>>>>>>>>>
>>>>>>>>>> Adrian Hunter (4):
>>>>>>>>>> mmc: core: Add a facility to "pause" re-tuning
>>>>>>>>>> mmc: block: Pause re-tuning while switched to the RPMB
>>>>>>>>>> partition
>>>>>>>>>> mmc: block: Always switch back to main area after RPMB access
>>>>>>>>>> mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel
>>>>>>>>>> controller
>>>>>>>>>>
>>>>>>>>>> Alan (1):
>>>>>>>>>> ASoC: Intel: Skylake: fix pointer scaling
>>>>>>>>>>
>>>>>>>>>> Alan Cox (1):
>>>>>>>>>> ASoC: Intel: Skylake: remove bogus comparison of an array
>>>>>>>>>> with NULL
>>>>>>>>>>
>>>>>>>>>> Alex Dai (2):
>>>>>>>>>> drm/i915/guc: Add GuC css header parser
>>>>>>>>>> drm/i915/guc: Clean up locks in GuC
>>>>>>>>>>
>>>>>>>>>> Alex Goins (2):
>>>>>>>>>> i915: wait for fence in mmio_flip_work_func
>>>>>>>>>> i915: wait for fence in prepare_plane_fb
>>>>>>>>>>
>>>>>>>>>> Ander Conselvan de Oliveira (10):
>>>>>>>>>> drm/i915: Don't pass *DP around to link training functions
>>>>>>>>>> drm/i915: Split write of pattern to DP reg from
>>>>>>>>>> intel_dp_set_link_train
>>>>>>>>>> drm/i915 Call get_adjust_train() from clock recovery and
>>>>>>>>>> channel eq
>>>>>>>>>> drm/i915: Move register write into
>>>>>>>>>> intel_dp_set_signal_levels()
>>>>>>>>>> drm/i915: Move generic link training code to a separate file
>>>>>>>>>> drm/i915: Create intel_dp->prepare_link_retrain() hook
>>>>>>>>>> drm/i915: Make intel_dp_source_supports_hbr2() take an
>>>>>>>>>> intel_dp pointer
>>>>>>>>>> drm/i915: Fix SKL i_boost level
>>>>>>>>>> drm/i915: Don't do edp panel detection in g4x_dp_detect()
>>>>>>>>>> drm/i915: Remove platform specific *_dp_detect() functions
>>>>>>>>>>
>>>>>>>>>> Andreas Ziegler (1):
>>>>>>>>>> drm/i915: Remove select to deleted STOP_MACHINE from Kconfig
>>>>>>>>>>
>>>>>>>>>> Animesh Manna (4):
>>>>>>>>>> drm/i915/skl: Making DC6 entry is the last call in suspend
>>>>>>>>>> flow.
>>>>>>>>>> drm/i915/gen9: csr_init after runtime pm enable
>>>>>>>>>> drm/i915/gen9: Use flush_work to synchronize with dmc loader
>>>>>>>>>> drm/i915/skl: Removed assert for csr-fw-loading check during
>>>>>>>>>> disabling dc6
>>>>>>>>>>
>>>>>>>>>> Arun Siluvery (1):
>>>>>>>>>> Revert "drm/i915: Initialize HWS page address after GPU
>>>>>>>>>> reset"
>>>>>>>>>>
>>>>>>>>>> Bamvor Jian Zhang (1):
>>>>>>>>>> gpiolib: make comment consistent with code
>>>>>>>>>>
>>>>>>>>>> Chris Wilson (11):
>>>>>>>>>> drm/i915: Map the ringbuffer using WB on LLC machines
>>>>>>>>>> drm/i915: Report context GTT size
>>>>>>>>>> drm/i915: Add soft-pinning API for execbuffer
>>>>>>>>>> drm/i915: Recover all available ringbuffer space following
>>>>>>>>>> reset
>>>>>>>>>> drm/i915: Serialise updates to GGTT with access through GGTT
>>>>>>>>>> on Braswell
>>>>>>>>>> drm/i915: Fix RPS pointer passed from wait_ioctl to
>>>>>>>>>> i915_wait_request
>>>>>>>>>> drm/i915: Add soft-pinning API for execbuffer
>>>>>>>>>> drm/i915: Pin the ifbdev for the info->system_base GGTT
>>>>>>>>>> mmapping
>>>>>>>>>> drm/i915: Move Braswell stop_machine GGTT insertion
>>>>>>>>>> workaround
>>>>>>>>>> drm/i915: Allow i915_gem_object_get_page() on userptr as well
>>>>>>>>>> drm/i915: Balance assert_rpm_wakelock_held() for
>>>>>>>>>> !IS_ENABLED(CONFIG_PM)
>>>>>>>>>>
>>>>>>>>>> Damien Lespiau (4):
>>>>>>>>>> drm/i915/skl: Store and print the DMC firmware version we
>>>>>>>>>> load
>>>>>>>>>> drm/i915/skl: Print the DMC firmware status in debugfs
>>>>>>>>>> drm/i915/skl: Expose DC5/DC6 entry counts
>>>>>>>>>> drm/i915: Make turning on/off PW1 and Misc I/O part of the
>>>>>>>>>> init/fini sequences
>>>>>>>>>>
>>>>>>>>>> Damien.Horsley (1):
>>>>>>>>>> ASoC: Add SOC_DOUBLE_STS macro
>>>>>>>>>>
>>>>>>>>>> Dan Carpenter (3):
>>>>>>>>>> ASoC: Intel: Skylake: Fix a couple signedness bugs
>>>>>>>>>> ASoC: Intel: Skylake: pointer math issue
>>>>>>>>>> ASoC: Intel: sst: fix a loop timeout in
>>>>>>>>>> sst_hsw_stream_reset()
>>>>>>>>>>
>>>>>>>>>> Daniel Stone (2):
>>>>>>>>>> drm/i915/pm: Unstatic power_domain_str
>>>>>>>>>> drm/i915/pm: Print offending domain in refcount failure
>>>>>>>>>>
>>>>>>>>>> Daniel Vetter (25):
>>>>>>>>>> drm/i915: Fix formatting for gen8_cs_irq_handler
>>>>>>>>>> drm/i915: Update DRIVER_DATE to 20151023
>>>>>>>>>> Revert "drm/i915: Add soft-pinning API for execbuffer"
>>>>>>>>>> drm/i915: Shut up GuC errors when it's disabled
>>>>>>>>>> drm/i915: Don't complain about lack of ACPI video bios
>>>>>>>>>> drm/i915: use correct power domain for csr loading
>>>>>>>>>> drm/i915/gen9: move assert_csr_loaded into intel_rpm.c
>>>>>>>>>> drm/i915/gen9: Remove csr.state, csr_lock and related code.
>>>>>>>>>> drm/i915/gen9: Align line continuations in intel_csr.c.
>>>>>>>>>> drm/i915/gen9: Simplify csr loading failure printing.
>>>>>>>>>> drm/i915/gen9: Don't try to load garbage dmc firmware on
>>>>>>>>>> resume
>>>>>>>>>> drm/i915/gen9: Use dev_priv in csr functions
>>>>>>>>>> drm/i915/gen9: extract parse_csr_fw
>>>>>>>>>> drm/i915: Use request_firmware and our own async work
>>>>>>>>>> drm/i915: Drop return value from intel_fill_fb_ggtt_view
>>>>>>>>>> drm/i915: Stuff rotation params into view union
>>>>>>>>>> drm/i915: Fix i915_ggtt_view_equal to handle rotation
>>>>>>>>>> correctly
>>>>>>>>>> drm/i915: Update DRIVER_DATE to 20151120
>>>>>>>>>> drm/i915: fix fdi related fifo underruns on hsw
>>>>>>>>>> drm/i915: Restore skl_gt3 device info
>>>>>>>>>> Revert "drm/i915: Extend LRC pinning to cover GPU context
>>>>>>>>>> writeback"
>>>>>>>>>> drm/i915: Update DRIVER_DATE to 20151204
>>>>>>>>>> drm: Move drm_display_mode an related docs into kerneldoc
>>>>>>>>>> drm/i915: Update DRIVER_DATE to 20151218
>>>>>>>>>> drm/i915: Tune down rpm wakelock debug checks
>>>>>>>>>>
>>>>>>>>>> Danilo Cesar Lemes de Paula (1):
>>>>>>>>>> drm/doc: Convert to markdown
>>>>>>>>>>
>>>>>>>>>> Dave Gordon (4):
>>>>>>>>>> drm/i915: eliminate 'temp' in gen8_for_each_{pdd, pdpe,
>>>>>>>>>> pml4e} macros
>>>>>>>>>> drm/i915: intel_ring_initialized() must be simple and inline
>>>>>>>>>> drm/i915: mark GEM object pages dirty when mapped & written
>>>>>>>>>> by the CPU
>>>>>>>>>> drm/i915: mark a newly-created GEM object dirty when filled
>>>>>>>>>> with data
>>>>>>>>>>
>>>>>>>>>> Deepak M (4):
>>>>>>>>>> drm/i915: Correct the Ref clock value for BXT
>>>>>>>>>> drm/i915: add VBT address and size fields to ASLE mailbox
>>>>>>>>>> struct
>>>>>>>>>> drm/i915: dual link pipe selection for bxt
>>>>>>>>>> drm/i915: Add Intel opregion mailbox 5 structure
>>>>>>>>>>
>>>>>>>>>> Deepak S (2):
>>>>>>>>>> drm/i915/kbl: Add Kabylake PCI ID
>>>>>>>>>> drm/i915/kbl: Add Kabylake GT4 PCI ID
>>>>>>>>>>
>>>>>>>>>> Dharageswari R (2):
>>>>>>>>>> ASoC: Intel: Skylake: Add support for Loadable modules
>>>>>>>>>> ASoC: Intel: Skylake: Add support for Mic Select module
>>>>>>>>>>
>>>>>>>>>> Dharageswari.R (7):
>>>>>>>>>> ASoC: Intel: Skylake: Use CGCTL.MISCBDCGE for Phrase
>>>>>>>>>> detection notification
>>>>>>>>>> ASoC: Intel: Skylake: Fix pipe memory allocation leak
>>>>>>>>>> ASoC: Intel: Skylake: Get node id using helper
>>>>>>>>>> ASoC: Intel: Skylake: Add skl_tplg_be_get_cpr_module() helper
>>>>>>>>>> ASoC: Intel: Skylake: Add MCLK configuration
>>>>>>>>>> ASoC: Intel: Skylake: Fix the NULL pointer exception in
>>>>>>>>>> dsp_clean up
>>>>>>>>>> ASoC: Intel: Skylake: Prevent sending Set DMA Control IPC if
>>>>>>>>>> the widget is "On"
>>>>>>>>>>
>>>>>>>>>> Fang, Yang A (3):
>>>>>>>>>> ASoC: Intel: Skylake: add adi + nau8825 machine driver entry
>>>>>>>>>> ASoc: Intel: boards: fix dapm map of nau88l25_ssm4567 machine
>>>>>>>>>> ASoc: Intel: boards: Add HDMI/DP links for nau88l25_ssm4567
>>>>>>>>>> machine
>>>>>>>>>>
>>>>>>>>>> Gerd Hoffmann (2):
>>>>>>>>>> drm/i915: more virtual south bridge detection
>>>>>>>>>> drm/i915: refine qemu south bridge detection
>>>>>>>>>>
>>>>>>>>>> Guneshwor Singh (2):
>>>>>>>>>> ASoC: Intel: Skylake: Fix delay wrap condition
>>>>>>>>>> ASoC: Intel: Skylake: Fix mcps freeup after module unbind
>>>>>>>>>> failure
>>>>>>>>>>
>>>>>>>>>> Guruprasad Pawse (1):
>>>>>>>>>> ASoC: Intel: Add Broxton machine driver
>>>>>>>>>>
>>>>>>>>>> Hardik T Shah (3):
>>>>>>>>>> ASoC: Intel: Skylake: Add multiple pin formats
>>>>>>>>>> ASoC: Intel: Skylake: Update the topology interface structure
>>>>>>>>>> ASoC: Intel: Skylake: Add support for module GUIDs
>>>>>>>>>>
>>>>>>>>>> Harsha Priya (1):
>>>>>>>>>> ASoC: Intel: Skylake: Adding nau88l25+ssm4567 machine driver
>>>>>>>>>>
>>>>>>>>>> Imre Deak (42):
>>>>>>>>>> drm/i915/gen9: flush DMC fw loading work during system
>>>>>>>>>> suspend
>>>>>>>>>> drm/i915: get runtime PM reference around GEM set_tiling
>>>>>>>>>> IOCTL
>>>>>>>>>> drm/i915: fix the power well ID for always on wells
>>>>>>>>>> drm/i915: fix lookup_power_well for power wells without any
>>>>>>>>>> domain
>>>>>>>>>> drm/i915: rename intel_power_domains_resume to *_sync_hw
>>>>>>>>>> drm/i915/skl: init/uninit display core as part of the HW
>>>>>>>>>> power domain state
>>>>>>>>>> drm/i915/skl: don't toggle PW1 and MISC power wells on-demand
>>>>>>>>>> drm/i915/gen9: simplify DC toggling code
>>>>>>>>>> drm/i915/skl: disable DC states before display core
>>>>>>>>>> init/uninit
>>>>>>>>>> drm/i915/skl: make sure LCPLL is disabled when uniniting
>>>>>>>>>> CDCLK
>>>>>>>>>> drm/i915: fix handling of the disable_power_well module
>>>>>>>>>> option
>>>>>>>>>> drm/i915: take a power domain ref only when needed during
>>>>>>>>>> HDMI detect
>>>>>>>>>> drm/i915/skl: enable PC9/10 power states during suspend-to-
>>>>>>>>>> idle
>>>>>>>>>> drm/i915/skl: re-enable power well support
>>>>>>>>>> drm/i915/bxt: backlight clock gating workaround
>>>>>>>>>> drm/i915: vlv: clamp minimum RPS frequency to what Punit
>>>>>>>>>> allows
>>>>>>>>>> drm/i915: clarify comment about mandatory RPM put/get during
>>>>>>>>>> driver load/unload
>>>>>>>>>> drm/i915: refactor RPM disabling due to RC6 being disabled
>>>>>>>>>> drm/i915: get a permanent RPM reference on platforms w/o RPM
>>>>>>>>>> support
>>>>>>>>>> drm/i915: remove HAS_RUNTIME_PM check from RPM get/put/assert
>>>>>>>>>> helpers
>>>>>>>>>> drm/i915: add assert_rpm_wakelock_held helper
>>>>>>>>>> drm/i915: use assert_rpm_wakelock_held instead of opencoding
>>>>>>>>>> it
>>>>>>>>>> drm/i915: add support for checking if we hold an RPM
>>>>>>>>>> reference
>>>>>>>>>> drm/i915: check that we hold an RPM wakelock ref before we
>>>>>>>>>> put it
>>>>>>>>>> drm/i915: add support for checking RPM atomic sections
>>>>>>>>>> drm/i915: check that we are in an RPM atomic section in GGTT
>>>>>>>>>> PTE updaters
>>>>>>>>>> drm/i915: don't enable autosuspend on platforms without RPM
>>>>>>>>>> support
>>>>>>>>>> drm/i915: Add helper to get a display power ref if it was
>>>>>>>>>> already enabled
>>>>>>>>>> drm/i915: Ensure the HW is powered during display pipe HW
>>>>>>>>>> readout
>>>>>>>>>> drm/i915/ibx: Ensure the HW is powered during PLL HW readout
>>>>>>>>>> drm/i915: Ensure the HW is powered when disabling VGA
>>>>>>>>>> drm/i915: Ensure the HW is powered during HW access in
>>>>>>>>>> assert_pipe
>>>>>>>>>> drm/i915/crt: Ensure the HW is powered during HW state
>>>>>>>>>> readout
>>>>>>>>>> drm/i915/ddi: Ensure the HW is powered during HW state
>>>>>>>>>> readout
>>>>>>>>>> drm/i915: Ensure the HW is powered when accessing the CRC HW
>>>>>>>>>> block
>>>>>>>>>> drm/i915/dp: Ensure the HW is powered during HW state readout
>>>>>>>>>> drm/i915/dsi: Ensure the HW is powered during HW state
>>>>>>>>>> readout
>>>>>>>>>> drm/i915/hdmi: Ensure the HW is powered during HW state
>>>>>>>>>> readout
>>>>>>>>>> drm/i915/lvds: Ensure the HW is powered during HW state
>>>>>>>>>> readout
>>>>>>>>>> drm/i915/skl: Ensure HW is powered during DDB HW state
>>>>>>>>>> readout
>>>>>>>>>> drm/i915/skl: Fix power domain suspend sequence
>>>>>>>>>> drm/i915/bxt: Suspend power domains during suspend-to-idle
>>>>>>>>>>
>>>>>>>>>> Ioan-Adrian Ratiu (1):
>>>>>>>>>> drm/i915/dma: enforce pr_<loglevel> consistency
>>>>>>>>>>
>>>>>>>>>> Jani Nikula (37):
>>>>>>>>>> drm/i915: remove parens around revision ids
>>>>>>>>>> drm/i915/bxt: add revision id for A1 stepping and use it
>>>>>>>>>> drm/i915: add helpers for platform specific revision id range
>>>>>>>>>> checks
>>>>>>>>>> drm/i915: remove an extra level of indirection in PCI ID list
>>>>>>>>>> drm/i915: fix indentation on skl stepping info
>>>>>>>>>> drm/i915: constify bxt stepping info
>>>>>>>>>> drm/i915: refactor stepping info retrieval
>>>>>>>>>> drm/i915: remove duplicate definition of
>>>>>>>>>> for_each_power_domain
>>>>>>>>>> drm: fix potential dangling else problems in for_each_ macros
>>>>>>>>>> drm/i915: fix potential dangling else problems in for_each_
>>>>>>>>>> macros
>>>>>>>>>> drm/i915: fix the SDE irq dmesg warnings properly
>>>>>>>>>> drm/i915/dsi: merge pre_pll_enable hook to pre_enable
>>>>>>>>>> drm/i915: remove pre_pll_enable hook from DDI/gen9+ crtc
>>>>>>>>>> enable
>>>>>>>>>> drm/i915: add has_dsi_encoder to crtc state
>>>>>>>>>> drm/i915/bxt: add support for setting backlight freq from vbt
>>>>>>>>>> drm/i915: use default 200 Hz backlight frequency
>>>>>>>>>> drm/i915: simplify gmbus xfer error checks
>>>>>>>>>> drm/i915: abstract i2c bit banging fallback in gmbus xfer
>>>>>>>>>> drm/i915: move "no VBT in opregion" quirk to
>>>>>>>>>> intel_opregion_setup()
>>>>>>>>>> drm/i915/bios: have functions return vbt, not bdb, header
>>>>>>>>>> pointer
>>>>>>>>>> drm/i915/bios: move debug logging about VBT source to
>>>>>>>>>> intel_parse_bios()
>>>>>>>>>> drm/i915/bios: rename intel_parse_bios to intel_bios_init
>>>>>>>>>> drm/i915: refactor VBT validation
>>>>>>>>>> drm/i915/opregion: make VBT size limit more strict
>>>>>>>>>> drm/i915/opregion: make VBT pointer a const
>>>>>>>>>> drm/i915: don't use a temp buffer for opregion debugfs file
>>>>>>>>>> drm/i915/debugfs: add a separate debugfs file for VBT
>>>>>>>>>> drm/i915: prefer for_each_intel_* macros for iteration
>>>>>>>>>> drm/i915: move drmP.h include to i915_drv.h
>>>>>>>>>> drm/i915/bios: fix format string of the VBT signature logging
>>>>>>>>>> drm/i915/bios: prefer using dev_priv over dev pointer
>>>>>>>>>> drm/i915/bios: reduce indent in parse_general_features
>>>>>>>>>> drm/i915/opregion: handle VBT sizes bigger than 6 KB
>>>>>>>>>> drm/i915/backlight: prefer dev_priv over dev pointer
>>>>>>>>>> drm/i915/dsi: skip gpio element execution when not supported
>>>>>>>>>> drm/i915/dp: abstract training pattern selection
>>>>>>>>>> drm/i915/dp: reduce missing TPS3 support errors to debug
>>>>>>>>>> logging
>>>>>>>>>>
>>>>>>>>>> Jayachandran B (4):
>>>>>>>>>> ALSA: hdac: Increase timeout value for link power check
>>>>>>>>>> ASoC: Intel: Skylake: fix reset controller sequencing
>>>>>>>>>> ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core
>>>>>>>>>> [REVERTME] mfd: arizona: Set pdata and supplies for Intel
>>>>>>>>>> WM8998/8281 AoBs
>>>>>>>>>>
>>>>>>>>>> Jeeja KP (70):
>>>>>>>>>> ASoC: Intel: Skylake: Fix to correct check for non DSP widget
>>>>>>>>>> ASoC: Intel: Skylake: Fix not to ignore return value in be
>>>>>>>>>> hw_params
>>>>>>>>>> ASoC: Intel: Skylake: Fix to add 32 bit in update FE params
>>>>>>>>>> ASoC: Intel: Skylake: Fix to ignore codec_mask check in probe
>>>>>>>>>> ASoC: Intel: Skylake: Fix to ignore blob check if link type
>>>>>>>>>> is HDA
>>>>>>>>>> ASoC: Intel: Skylake: Fix bit depth when querying the NHLT
>>>>>>>>>> blob
>>>>>>>>>> ASoC: Intel: Skylake: Add support for virtual dsp widgets
>>>>>>>>>> ASoC: Intel: Skylake: Fix DSP pipe underrun/overrun issue
>>>>>>>>>> ASoC: Intel: Skylake: Fix to remove be copier widget power
>>>>>>>>>> check
>>>>>>>>>> ASoC: Intel: Skylake: Ignore rate check for DMIC link
>>>>>>>>>> ASoC: Intel: Skylake: Fix to remove channel_map calculation
>>>>>>>>>> ASoC: Intel: Skylake: Fix PM behaviour
>>>>>>>>>> ASoC: Intel: Skylake: Fix the SSP0 Fmt fixup to 24 bit
>>>>>>>>>> ASoC: Intel: Skylake: Add support for SSP1 BE cpu dai
>>>>>>>>>> ASoC: Intel: Skylake: remove pm_runtime_get/put calls
>>>>>>>>>> ASoC: Intel: Skylake: Don't enable WAKEENABLE on suspend
>>>>>>>>>> ASoC: Intel: Skylake: Remove redundant init in resume
>>>>>>>>>> ASoC: Intel: Skylake: Fix cleanup of dma buffer
>>>>>>>>>> ASoC: Intel: Skylake: Reset the DSP when set D3 fails
>>>>>>>>>> ASoC: Intel: Skylake: Fix CLDMA buffer wrap case
>>>>>>>>>> ASoC: Intel: Skylake: Fix null ptr dereferenced in
>>>>>>>>>> skl_tplg_bind_sinks
>>>>>>>>>> ASoC: Intel: Skylake: Add pm ops for skl_rt286 machine
>>>>>>>>>> ASoC: Intel: Skylake: Reconfigure HDA stream register in
>>>>>>>>>> prepare/resume
>>>>>>>>>> ASoC: Intel: Skylake: Fix to update bit depth for module
>>>>>>>>>> params
>>>>>>>>>> ASoC: Intel: Skylake: Update pcm capability
>>>>>>>>>> ASoC: Intel: Skylake: Poll CLDMA RUN bit when set
>>>>>>>>>> ASoC: Intel: Skylake: Update DMIC DAIs and capabilities
>>>>>>>>>> ASoC: Intel: Skylake: Add helper routines to handle module
>>>>>>>>>> params
>>>>>>>>>> ASoC: Intel: Skylake: Add helper routine to handle Algo
>>>>>>>>>> parameter
>>>>>>>>>> ASoC: Intel: Skylake: Add support to configure module params
>>>>>>>>>> ASoC: Intel: Skylake: Add tlv byte kcontrols
>>>>>>>>>> ASoC: Intel: Skylake: Add memory pages to widget data.
>>>>>>>>>> ASoC: Intel: Skylake: Fix module init data correctly
>>>>>>>>>> ASoC: Intel: Skylake: Add dai link for DMIC capture
>>>>>>>>>> ASoC: Intel: Skylake: Add support for active suspend
>>>>>>>>>> ASoC: Intel: Skylake: Clear stream registers before stream
>>>>>>>>>> setup
>>>>>>>>>> ASoC: Intel: Skylake: Fix to set pipe state to invalid when
>>>>>>>>>> deleting
>>>>>>>>>> ALSA: hdac: couple the hda DMA stream in cleanup
>>>>>>>>>> ASoC: Intel: Skylake: enable interrupt as wake source in
>>>>>>>>>> active suspend
>>>>>>>>>> ASoC: Intel: Skylake: Add DMA resume position in Trigger
>>>>>>>>>> resume/suspend
>>>>>>>>>> ASoC: Intel: Skylake: Reconfigure Link stream on
>>>>>>>>>> suspend/resume
>>>>>>>>>> ASoC: Intel: Skylake: Add Resume capability in PCM info.
>>>>>>>>>> ASoC: Intel: Skylake: Fix return of skl_get_queue_index
>>>>>>>>>> ASoC: Intel: Skylake: Fix the module state check condition
>>>>>>>>>> ASoC: Intel: Skylake: Fix not to stop sink pipe in pga pmd
>>>>>>>>>> event
>>>>>>>>>> ASoC: Intel: Skylake: Fix bind of source with multiple sinks
>>>>>>>>>> ASoC: Intel: Skylake: Add missing PRE/POST_PMU handlers for
>>>>>>>>>> vmixer
>>>>>>>>>> ASoC: Intel: Skylake: Fix stereo DMIC record
>>>>>>>>>> ASoC: Intel: Skylake: Allow module parameter set after bind
>>>>>>>>>> ASoC: Intel: Skylake: Add shutdown callback
>>>>>>>>>> ASoC: Intel: Skylake: Fill BE blob with default params
>>>>>>>>>> ASoC: Intel: Skylake: Fix memory leak in nhlt init
>>>>>>>>>> ASoC: Intel: boards: Enable HDMI and DP on skl_rt286 machine
>>>>>>>>>> ASoC: Intel: boards: Enable HDMI and DP on nau88l2 machine
>>>>>>>>>> ASoC: Intel: boards: Remove WoV sink in skl_rt286
>>>>>>>>>> ASoC: Intel: boards: Remove WoV sink in nau88125_ssm4567
>>>>>>>>>> machine
>>>>>>>>>> ASoC: Intel: boards: Remove WoV sink in nau88125_max98357a
>>>>>>>>>> machine
>>>>>>>>>> ASoC: Intel: Skylake: correct direction in blob query
>>>>>>>>>> ASoC: Intel: Skylake: Add IVI feedback path in
>>>>>>>>>> nau88125_ssm4567 machine
>>>>>>>>>> ASoC: Intel: Skylake: remove IVI codec loop in
>>>>>>>>>> skl_nau88l25_ssm4567 machine
>>>>>>>>>> ASoC: Intel: add dmabuffer to common sst_dsp
>>>>>>>>>> ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops
>>>>>>>>>> ASoC: Intel: Skylake: Fix for unloading module only when it
>>>>>>>>>> is loaded
>>>>>>>>>> ASoC: Intel: Skylake: Fix DSP resource de-allocation
>>>>>>>>>> ASoC: Intel: Skylake: Suspend PCMs when marked as active
>>>>>>>>>> suspend
>>>>>>>>>> ASoC: Intel: Skylake: Fix support for multiple pins in a
>>>>>>>>>> module
>>>>>>>>>> ALSA: hda: fix to wait for RIRB & CORB DMA to set
>>>>>>>>>> ASoC: topology: Fix memory leak in widget creation
>>>>>>>>>> ASoC: Intel: Boards: remove ignore_suspend for WoV streams
>>>>>>>>>> ASoC: Intel: Bxtn: Add Broxton DSP support
>>>>>>>>>>
>>>>>>>>>> Jie Yang (1):
>>>>>>>>>> ASoC: Intel: sst: only select sst-firmware when DW DMAC is
>>>>>>>>>> built-in
>>>>>>>>>>
>>>>>>>>>> Joonas Lahtinen (1):
>>>>>>>>>> drm/i915: Cancel hangcheck before GPU is suspended
>>>>>>>>>>
>>>>>>>>>> Julia Lawall (3):
>>>>>>>>>> ASoC: Intel: constify sst_block_ops structures
>>>>>>>>>> drm/i915: constify intel_dvo_dev_ops structures
>>>>>>>>>> drm/dp/mst: constify drm_dp_mst_topology_cbs structures
>>>>>>>>>>
>>>>>>>>>> Kumar, Mahesh (1):
>>>>>>>>>> drm/i915/skl: Correct other-pipe watermark update condition
>>>>>>>>>> check (v2)
>>>>>>>>>>
>>>>>>>>>> Liam Girdwood (1):
>>>>>>>>>> ASoC: Intel: sst: fix the IRQ locked issue
>>>>>>>>>>
>>>>>>>>>> Libin Yang (11):
>>>>>>>>>> ALSA: hda - add codec support for Kabylake display audio
>>>>>>>>>> codec
>>>>>>>>>> ALSA: hda - hdmi begin to support dynamic PCM assignment
>>>>>>>>>> ALSA: hda - hdmi playback without monitor in dynamic pcm bind
>>>>>>>>>> mode
>>>>>>>>>> ALSA: hda - hdmi operate spdif based on pcm
>>>>>>>>>> ALSA: hda - hdmi dynamically bind PCM to pin when monitor
>>>>>>>>>> hotplug
>>>>>>>>>> ALSA: hda - hdmi setup pin when monitor hotplug in pcm
>>>>>>>>>> dynamic assignment mode
>>>>>>>>>> ALSA: hda - add hdmi_pcm to manage hdmi pcm related features
>>>>>>>>>> dp/mst: add SDP stream support
>>>>>>>>>> drm/i915: start adding dp mst audio
>>>>>>>>>> ALSA: hda - build chmap kctl based on pcm in hdmi audio
>>>>>>>>>> ALSA: hda - hdmi jack created based on pcm
>>>>>>>>>>
>>>>>>>>>> Linus Walleij (2):
>>>>>>>>>> pinctrl: intel: use gpiochip data pointer
>>>>>>>>>> gpio: add a data pointer to gpio_chip
>>>>>>>>>>
>>>>>>>>>> Lukas Wunner (7):
>>>>>>>>>> drm/i915: On fb alloc failure, unref gem object where it gets
>>>>>>>>>> refed
>>>>>>>>>> drm/i915: Fix double unref in intelfb_alloc failure path
>>>>>>>>>> drm/i915: Clean up LVDS register handling harder
>>>>>>>>>> drm/i915: Fix oops caused by fbdev initialization failure
>>>>>>>>>> drm/i915: Tear down fbdev if initialization fails
>>>>>>>>>> drm: Remove unused fbdev_list members
>>>>>>>>>> ASoC: Intel: Use acpi_dev_present()
>>>>>>>>>>
>>>>>>>>>> Lyude (1):
>>>>>>>>>> drm/i915/skl: Fix typo in DPLL_CFGCR1 definition
>>>>>>>>>>
>>>>>>>>>> Maarten Lankhorst (19):
>>>>>>>>>> drm/atomic: add connector mask to drm_crtc_state.
>>>>>>>>>> drm/i915: Make plane fb tracking work correctly, v2.
>>>>>>>>>> drm/i915: Make prepare_plane_fb fully interruptible.
>>>>>>>>>> drm/i915: Update legacy primary state outside the commit
>>>>>>>>>> hook, v2.
>>>>>>>>>> drm/i915: Only commit active planes when updating planes
>>>>>>>>>> during reset.
>>>>>>>>>> drm/i915: Only run commit when crtc is active, v2.
>>>>>>>>>> drm/i915: Only call commit_planes when there are things to
>>>>>>>>>> commit.
>>>>>>>>>> drm/i915: Do not wait for flips in
>>>>>>>>>> intel_crtc_disable_noatomic.
>>>>>>>>>> drm/i915: Make wait_for_flips interruptible.
>>>>>>>>>> drm/i915: Change locking for struct_mutex, v3.
>>>>>>>>>> drm/i915: Wait for object idle without locks in
>>>>>>>>>> atomic_commit, v2.
>>>>>>>>>> drm/i915: Handle cdclk limits on broadwell.
>>>>>>>>>> drm/i915: Move disable_cxsr to the crtc_state.
>>>>>>>>>> drm/i915: Calculate watermark related members in the
>>>>>>>>>> crtc_state, v4.
>>>>>>>>>> drm/i915/skl: Update watermarks before the crtc is disabled.
>>>>>>>>>> drm/i915: Remove double wait_for_vblank on broadwell.
>>>>>>>>>> drm/i915: Set connector_state->connector using the helper.
>>>>>>>>>> drm/i915: Update connector_mask during readout, v2.
>>>>>>>>>> drm/i915: Widen return value for
>>>>>>>>>> reservation_object_wait_timeout_rcu to long.
>>>>>>>>>>
>>>>>>>>>> Matt Ranostay (12):
>>>>>>>>>> ASoC: Intel: Skylake: use module_pin info for unbind
>>>>>>>>>> ASoC: Intel: Skylake: Add i915 enabling in skl probe
>>>>>>>>>> ASoC: intel: skylake: Add DSP lookup for BXT-M
>>>>>>>>>> [UPSTREAM] ASoC: skylake: Add BXT-M machine file checks
>>>>>>>>>> [UPSTREAM] ASoC: bxt_florida: update to
>>>>>>>>>> module_platform_driver()
>>>>>>>>>> [REVERTME] ASoC: intel: sst-match-acpi: Add missing merge
>>>>>>>>>> commit changes
>>>>>>>>>> [UPSTREAM] sound: pci: hda: add missing BXT-M reference
>>>>>>>>>> [REVERTME] mmc: host: pci: disable functionality to help
>>>>>>>>>> enumeration
>>>>>>>>>> [REVERTME] ASoC: Flush firmware from cache
>>>>>>>>>> [UPSTREAM] ASoC: bxt_florida: switch to device resources
>>>>>>>>>> [REVERTME] mfd: arizona-i2c: make driver probe with subsystem
>>>>>>>>>> [UPSTREAM] ASoC: skylake: added WARN_ON invalid dsp
>>>>>>>>>>
>>>>>>>>>> Matt Roper (13):
>>>>>>>>>> drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-
>>>>>>>>>> style WM (v4)
>>>>>>>>>> drm/i915/ivb: Move WaCxSRDisabledForSpriteScaling w/a to
>>>>>>>>>> atomic check
>>>>>>>>>> drm/i915: Drop intel_update_sprite_watermarks
>>>>>>>>>> drm/i915: Calculate pipe watermarks into CRTC state (v3)
>>>>>>>>>> drm/i915: Calculate ILK-style watermarks during atomic check
>>>>>>>>>> (v3)
>>>>>>>>>> drm/i915: Don't set plane visible during HW readout if CRTC
>>>>>>>>>> is off
>>>>>>>>>> drm/i915: Calculate watermark configuration during atomic
>>>>>>>>>> check (v2)
>>>>>>>>>> drm/i915/bxt: Fix eDP panel fitting (v2)
>>>>>>>>>> drm/i915/bxt: Force port A DDI to use 4 lanes
>>>>>>>>>> drm/i915/bxt: Disable power well support
>>>>>>>>>> drm/i915/bxt: Don't save/restore eDP panel power during
>>>>>>>>>> suspend (v3)
>>>>>>>>>> drm/i915: Pretend cursor is always on for ILK-style WM
>>>>>>>>>> calculations (v2)
>>>>>>>>>> drm/i915/bxt: Set max cdclk frequency properly
>>>>>>>>>>
>>>>>>>>>> Mengdong Lin (11):
>>>>>>>>>> ASoC: topology: ABI - Rename dai_elems to pcm_elems in
>>>>>>>>>> manifest
>>>>>>>>>> ASoC: Change the PCM runtime array to a list
>>>>>>>>>> ASoC: Define soc_init_dai_link() to wrap link intialization.
>>>>>>>>>> ASoC: Change 2nd argument of soc_bind_dai_link() to DAI link
>>>>>>>>>> pointer
>>>>>>>>>> ASoC: Implement DAI links in a list & define API to
>>>>>>>>>> add/remove a link
>>>>>>>>>> ASoC: Define add/remove_dai_link ops for a soc card
>>>>>>>>>> ASoC: soc_bind_dai_link() directly returns success for a
>>>>>>>>>> bound DAI link
>>>>>>>>>> ASoC: Bind new DAI links after probing components
>>>>>>>>>> ASoC: Define soc_add_dai() to add a DAI to a component
>>>>>>>>>> ASoC: Support registering a DAI dynamically
>>>>>>>>>> ASoC: Make aux_dev more like a generic component
>>>>>>>>>>
>>>>>>>>>> MichaÅ' Winiarski (1):
>>>>>>>>>> drm/i915: Avoid writing relocs with addresses in non-
>>>>>>>>>> canonical form
>>>>>>>>>>
>>>>>>>>>> Michel Thierry (2):
>>>>>>>>>> drm/i915/gen8: Flip the 48b switch
>>>>>>>>>> drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page
>>>>>>>>>>
>>>>>>>>>> Mika Kuoppala (8):
>>>>>>>>>> drm/i915/skl: Refuse to load outdated dmc firmware
>>>>>>>>>> drm/i915/bxt: Expose DC5 entry count
>>>>>>>>>> drm/i915: Add csr programming registers to dmc debugfs entry
>>>>>>>>>> drm/i915: Add dmc firmware load state and version to error
>>>>>>>>>> state
>>>>>>>>>> drm/i915: Avoid pointer arithmetic in calculating plane
>>>>>>>>>> surface offset
>>>>>>>>>> drm/i915/skl: Add SKL GT4 PCI IDs
>>>>>>>>>> drm/i915/skl: Default to noncoherent access up to F0
>>>>>>>>>> drm/i915/gen9: Verify and enforce dc6 state writes
>>>>>>>>>>
>>>>>>>>>> Mika Westerberg (5):
>>>>>>>>>> i2c: designware: Convert to use unified device property API
>>>>>>>>>> PCI: Move PCIe ports to D3 during suspend
>>>>>>>>>> PCI: No need to set d3cold_allowed to PCIe ports
>>>>>>>>>> ACPI / hotplug / PCI: Runtime resume bridge before rescan
>>>>>>>>>> PCI: Add runtime PM support for PCIe ports
>>>>>>>>>>
>>>>>>>>>> Mousami Jana (1):
>>>>>>>>>> ASoC: Intel: Skylake: add LARGE_CONFIG_GET IPC support
>>>>>>>>>>
>>>>>>>>>> Mousumi Jana (1):
>>>>>>>>>> ASoC: Intel: Skylake: Fix memory leak during init instance
>>>>>>>>>>
>>>>>>>>>> Mythri P K (1):
>>>>>>>>>> ASoC: core: Pass kcontrol to bytes tlv callbacks
>>>>>>>>>>
>>>>>>>>>> Namrta Salonie (2):
>>>>>>>>>> drm/i915 : Fix to remove unnecsessary checks in postclose
>>>>>>>>>> function.
>>>>>>>>>> drm/i915: Fix possible null dereference in framebuffer_info
>>>>>>>>>> debugfs function
>>>>>>>>>>
>>>>>>>>>> Nick Hoath (3):
>>>>>>>>>> drm/i195: Rename gt_irq_handler variable
>>>>>>>>>> drm/i915: Break out common code from gen8_gt_irq_handler
>>>>>>>>>> drm/i915: Extend LRC pinning to cover GPU context writeback
>>>>>>>>>>
>>>>>>>>>> Omair M Abdullah (2):
>>>>>>>>>> ASoC: Intel: Skylake: update mailbox uplink window offset and
>>>>>>>>>> size
>>>>>>>>>> ASoC: Intel: Skylake: read params from DSP if module is on
>>>>>>>>>>
>>>>>>>>>> Pardha Saradhi K (1):
>>>>>>>>>> ASoC: Intel: Skylake: Add SSP DAIs
>>>>>>>>>>
>>>>>>>>>> Patrik Jakobsson (10):
>>>>>>>>>> drm/i915: Don't trust CSR program memory contents
>>>>>>>>>> drm/i915/gen9: Always set mask memory up when enabling DC5 or
>>>>>>>>>> DC6
>>>>>>>>>> drm/i915: Remove distinction between DDI 2 vs 4 lanes
>>>>>>>>>> drm/i915: Add a modeset power domain
>>>>>>>>>> drm/i915: Do not warn on PG2 enabled in gen9_disable_dc5()
>>>>>>>>>> drm/i915: Explain usage of power well IDs vs bit groups
>>>>>>>>>> drm/i915/gen9: Turn DC handling into a power well
>>>>>>>>>> drm/i915/gen9: Add boot parameter for disabling DC6
>>>>>>>>>> drm/i915/skl: Remove unused suspend and resume callbacks
>>>>>>>>>> drm/i915/gen9: Check for DC state mismatch
>>>>>>>>>>
>>>>>>>>>> Paulo Zanoni (24):
>>>>>>>>>> drm/i915: change no_fbc_reason from enum to string
>>>>>>>>>> drm/i915: remove newline from a no_fbc_reason message
>>>>>>>>>> drm/i915: rename intel_fbc_nuke to intel_fbc_recompress
>>>>>>>>>> drm/i915: extract fbc_on_pipe_a_only()
>>>>>>>>>> drm/i915: remove unnecessary check for crtc->primary->fb
>>>>>>>>>> drm/i915: extract crtc_is_valid() on the FBC code
>>>>>>>>>> drm/i915: use struct intel_crtc *crtc at __intel_fbc_update()
>>>>>>>>>> drm/i915: fix the __intel_fbc_update() comments
>>>>>>>>>> drm/i915: don't disable_fbc() if FBC is already disabled
>>>>>>>>>> drm/i915: refactor FBC deactivation at init
>>>>>>>>>> drm/i915: remove too-frequent FBC debug message
>>>>>>>>>> drm/i915: clarify that checking the FB stride for CFB is
>>>>>>>>>> intentional
>>>>>>>>>> drm/i915: remove in_dbg_master check from intel_fbc.c
>>>>>>>>>> drm/i915: fix the CFB size check
>>>>>>>>>> drm/i915: set dev_priv->fbc.crtc before scheduling the enable
>>>>>>>>>> work
>>>>>>>>>> drm/i915: pass the crtc as an argument to intel_fbc_update()
>>>>>>>>>> drm/i915: introduce is_active/activate/deactivate to the FBC
>>>>>>>>>> terminology
>>>>>>>>>> drm/i915: introduce intel_fbc_{enable,disable}
>>>>>>>>>> drm/i915: alloc/free the FBC CFB during enable/disable
>>>>>>>>>> drm/i915: check for FBC planes in the same place as the pipes
>>>>>>>>>> drm/i915: use a single intel_fbc_work struct
>>>>>>>>>> drm/i915: kill fbc.uncompressed_size
>>>>>>>>>> drm/i915: get rid of FBC {,de}activation messages
>>>>>>>>>> drm/i915: only recompress FBC after flushing a drawing
>>>>>>>>>> operation
>>>>>>>>>>
>>>>>>>>>> Pierre-Louis Bossart (6):
>>>>>>>>>> ASoC: Intel: tag byt-rt5640 machine driver as deprecated
>>>>>>>>>> ASoC: Intel: add bytct-rt5651 machine driver
>>>>>>>>>> ASoC: Intel: Load the atom DPCM driver only
>>>>>>>>>> ASoc: Intel: Atom: add deep buffer definitions for atom
>>>>>>>>>> platforms
>>>>>>>>>> ASoC: Intel: common: filter ACPI devices with _STA return
>>>>>>>>>> value
>>>>>>>>>> ASoC: Intel: common: add translation from HID to codec-name
>>>>>>>>>>
>>>>>>>>>> Praveen Diwakar (1):
>>>>>>>>>> ASoC: Intel: Skylake: Update ignore suspend for rt286 machine
>>>>>>>>>>
>>>>>>>>>> Qi Zheng (1):
>>>>>>>>>> pinctrl: intel: implement gpio_irq_enable
>>>>>>>>>>
>>>>>>>>>> Ramesh Babu (2):
>>>>>>>>>> ASoC: Intel: Add Broxton-P machine driver
>>>>>>>>>> [REVERTME] mfd: arizona: Intel modification for arizona mfd
>>>>>>>>>> file
>>>>>>>>>>
>>>>>>>>>> Robert Fekete (1):
>>>>>>>>>> drm/i915: Add extra plane information in debugfs.
>>>>>>>>>>
>>>>>>>>>> Rodrigo Vivi (21):
>>>>>>>>>> drm/i915: Define IS_BROXTON properly.
>>>>>>>>>> drm/i915/kbl: Introduce Kabylake platform defition.
>>>>>>>>>> drm/i915: Allow 1 vblank to let Sink CRC calculation to start
>>>>>>>>>> or stop.
>>>>>>>>>> drm/i915: Make Sink crc calculation waiting for counter to
>>>>>>>>>> reset.
>>>>>>>>>> drm/i915: Stop tracking last calculated Sink CRC.
>>>>>>>>>> drm/i915: Rely on TEST_SINK_START instead of tracking Sink
>>>>>>>>>> CRC state on dev_priv.
>>>>>>>>>> drm/i915: Delay first PSR activation.
>>>>>>>>>> drm/i915: Reduce PSR re-activation time for VLV/CHV.
>>>>>>>>>> drm/i915: PSR: Don't Skip aux handshake on
>>>>>>>>>> DP_PSR_NO_TRAIN_ON_EXIT.
>>>>>>>>>> drm/i915: Send TP1 TP2/3 even when panel claims no
>>>>>>>>>> NO_TRAIN_ON_EXIT.
>>>>>>>>>> drm/i915: Remove duplicated dpcd write on
>>>>>>>>>> hsw_psr_enable_sink.
>>>>>>>>>> drm/i915: PSR: Let's rely more on frontbuffer tracking.
>>>>>>>>>> drm/i915: PSR: Mask LPSP hw tracking back again.
>>>>>>>>>> drm/i915: Remove PSR Perf Counter for SKL+
>>>>>>>>>> drm/i915: Also disable PSR on Sink when disabling it on
>>>>>>>>>> Source.
>>>>>>>>>> drm/i915: Fix idle_frames counter.
>>>>>>>>>> drm/i915/kbl: Use propper ddi buffer translation table for
>>>>>>>>>> Kabylake ULT and ULX.
>>>>>>>>>> drm/i915/kbl: drm/i915: Avoid GuC loading for now on
>>>>>>>>>> Kabylake.
>>>>>>>>>> drm/i915/kbl: Fix DMC load on Kabylake.
>>>>>>>>>> drm/i915: Fix random aux transactions failures.
>>>>>>>>>> drm/i915: PSR also doesn't have link_entry_time on SKL.
>>>>>>>>>>
>>>>>>>>>> Rohit Ainapure (2):
>>>>>>>>>> ASoC: Intel: Add Nuvoton+Maxim machine driver entry
>>>>>>>>>> ASoC: Intel: Skylake: Add Nuvoton Maxim machine driver
>>>>>>>>>>
>>>>>>>>>> Sathya Prakash M R (1):
>>>>>>>>>> ASoC: Intel: boards: Add IV feedback route for
>>>>>>>>>> nau88l25_ssm4567 machine
>>>>>>>>>>
>>>>>>>>>> Sathyanarayana Nujella (2):
>>>>>>>>>> ASoc: Intel: boards: Add WOV as sink for nau88l25_ssm4567
>>>>>>>>>> machine
>>>>>>>>>> ASoC: Intel: boards: Enable HDMI and DP on SKL
>>>>>>>>>> nau88l25_max98357 machine
>>>>>>>>>>
>>>>>>>>>> Senthilnathan Veppur (1):
>>>>>>>>>> ASoC: Intel: Bxtn: Add Broxton PCI ID
>>>>>>>>>>
>>>>>>>>>> Shobhit Kumar (2):
>>>>>>>>>> drm/i915/skl: If needed sanitize bios programmed cdclk
>>>>>>>>>> drm/i915/skl: While sanitizing cdclock check the SWF18 as
>>>>>>>>>> well
>>>>>>>>>>
>>>>>>>>>> Shubhangi Shrivastava (2):
>>>>>>>>>> drm/i915: Cleanup test data during long/short hotplug
>>>>>>>>>> drm/i915: force link training when requested by Sink
>>>>>>>>>>
>>>>>>>>>> Steve Sakoman (1):
>>>>>>>>>> [REVERTME] hack to enable spidev since bios doesn't
>>>>>>>>>>
>>>>>>>>>> Subhransu S. Prusty (22):
>>>>>>>>>> ASoC: Intel: Skylake: Fix to cleanup if skl_sst_dsp_init
>>>>>>>>>> fails
>>>>>>>>>> ASoC: Intel: Skylake: Fix possible memory corruption in codec
>>>>>>>>>> dai dma params
>>>>>>>>>> ASoC: Intel: Skylake: Fix to turn OFF codec power when
>>>>>>>>>> entering S3
>>>>>>>>>> ASoC: Intel: Skylake: Add HDMI FE and BE cpu dais
>>>>>>>>>> ASoC: Intel: Skylake: Fix ibs/obs calc for non-integral
>>>>>>>>>> sampling rates
>>>>>>>>>> ASoC: Intel: Skylake: Add multichannel support for HDMI
>>>>>>>>>> ASoC: Intel: Skylake: Update channel map based on runtime
>>>>>>>>>> params
>>>>>>>>>> ALSA: hda - Create common chmap object
>>>>>>>>>> ALSA: hda - Register chmap obj as priv data instead of codec
>>>>>>>>>> ALSA: hda - Use hdac name space for CEA spk alloc structure
>>>>>>>>>> ALSA: hda - Add hdmi chmap verb programming ops to chmap
>>>>>>>>>> object
>>>>>>>>>> ALSA: hda - chmap helper args modified to use generic hdac
>>>>>>>>>> objs.
>>>>>>>>>> ALSA: hda - Move chmap support helpers/ops to core
>>>>>>>>>> ALSA: hda - Use snd_hdac namespace prefix for chmap exported
>>>>>>>>>> APIs
>>>>>>>>>> ALSA: hda - add helper to get channels from cap bits
>>>>>>>>>> ASoC: hdac_hdmi: parse eld for channel map capability
>>>>>>>>>> ASoC: hdac_hdmi: Add multichannel support
>>>>>>>>>> ASoC: skl_rt286: Fix to support hdmi channel map support
>>>>>>>>>> ASoC: Intel: boards: Update skl_nau88l25_max98357a driver to
>>>>>>>>>> support chmap
>>>>>>>>>> ASoC: Intel: boards: Update skl_nau88l25_ssm4567 driver to
>>>>>>>>>> support chmap
>>>>>>>>>> ASoC: hdac_hdmi: Register chmap controls and ops
>>>>>>>>>> ALSA: hda - Update chmap tlv to report sink's capability
>>>>>>>>>>
>>>>>>>>>> Sudip Mukherjee (3):
>>>>>>>>>> ASoC: Intel: Skylake: Fix memory leak
>>>>>>>>>> ASoC: fix memory leak
>>>>>>>>>> drm/i915: check for return value
>>>>>>>>>>
>>>>>>>>>> Takashi Iwai (25):
>>>>>>>>>> ALSA: hda - Skip ELD notification during PM process
>>>>>>>>>> ALSA: hda - Do zero-clear in snd_hdmi_parse_eld() itself
>>>>>>>>>> ALSA: hda - Split ELD update code from hdmi_present_sense()
>>>>>>>>>> ALSA: hda - Optimize audio component check in patch_hdmi.c
>>>>>>>>>> ALSA: hda - Fix superfluous HDMI jack repoll
>>>>>>>>>> ALSA: hda - Use component ops for i915 HDMI/DP audio jack
>>>>>>>>>> handling
>>>>>>>>>> ALSA: hda - Degrade i915 binding failure message
>>>>>>>>>> ALSA: hda - Move audio component accesses to hdac_i915.c
>>>>>>>>>> ALSA: hda - Add a sanity check of pin / port mapping on i915
>>>>>>>>>> HDMI/DP
>>>>>>>>>> ALSA: hda - Clear the leftover component assignment at
>>>>>>>>>> snd_hdac_i915_exit()
>>>>>>>>>> ALSA: hda - Fix yet another i915 pointer leftover in error
>>>>>>>>>> path
>>>>>>>>>> ALSA: hda - Bind with i915 only when Intel graphics is
>>>>>>>>>> present
>>>>>>>>>> drm/i915: Add get_eld audio component
>>>>>>>>>> drm/i915: Add reverse mapping between port and intel_encoder
>>>>>>>>>> drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
>>>>>>>>>> ALSA: hda - Clean up the code to check bdl_pos_adj option
>>>>>>>>>> ALSA: hda - Merge RIRB_PRE_DELAY into CTX_WORKAROUND caps
>>>>>>>>>> ALSA: hda - Raise AZX_DCAPS_RIRB_DELAY handling into top
>>>>>>>>>> drivers
>>>>>>>>>> ALSA: hda - Loop interrupt handling until really cleared
>>>>>>>>>> ALSA: hda - Fix missing ELD update at unplugging
>>>>>>>>>> ALSA: hda - Fix spurious kernel WARNING on Baytrail HDMI
>>>>>>>>>> ALSA: hda - Limit i915 HDMI binding only for HSW and later
>>>>>>>>>> ALSA: hda - Really restrict i915 notifier to HSW+
>>>>>>>>>> ALSA: hda - Workaround for unbalanced i915 power refcount by
>>>>>>>>>> concurrent probe
>>>>>>>>>> ALSA: hda - Split out Intel-specific codes from
>>>>>>>>>> patch_generic_hdmi()
>>>>>>>>>>
>>>>>>>>>> Tim Gore (2):
>>>>>>>>>> drm/i915: make A0 wa's applied to A1
>>>>>>>>>> drm/i915: implement WaClearTdlStateAckDirtyBits
>>>>>>>>>>
>>>>>>>>>> Tomas Elf (3):
>>>>>>>>>> drm/i915: Grab execlist spinlock to avoid post-reset
>>>>>>>>>> concurrency issues.
>>>>>>>>>> drm/i915: Cope with request list state change during error
>>>>>>>>>> state capture
>>>>>>>>>> drm/i915: Update to post-reset execlist queue clean-up
>>>>>>>>>>
>>>>>>>>>> Tvrtko Ursulin (4):
>>>>>>>>>> drm/i915/skl: Assume no scaling is available when things are
>>>>>>>>>> not as expected
>>>>>>>>>> drm/i915/skl: Consider plane rotation when calculating stride
>>>>>>>>>> in skl_do_mmio_flip
>>>>>>>>>> drm/i915: Fix failure paths around initial fbdev allocation
>>>>>>>>>> drm/i915: Remove redundant check in i915_gem_obj_to_vma
>>>>>>>>>>
>>>>>>>>>> Ville Syrjälä (92):
>>>>>>>>>> pci: Decouple quirks.c from i915_reg.h
>>>>>>>>>> drm: Add crtc->name and use it in debug messages
>>>>>>>>>> drm: Add plane->name and use it in debug prints
>>>>>>>>>> drm/i915: Refactor ilk_update_wm (v3)
>>>>>>>>>> drm/i915: Turn __raw_i915_read8() & co. in to inline
>>>>>>>>>> functions
>>>>>>>>>> drm/i915: Read FORCEWAKE registers with I915_READ_FW()
>>>>>>>>>> drm/i915: Minor style nits in intel_uncore.c
>>>>>>>>>> drm/i915: Respin vlv/chv reagister access to look more like
>>>>>>>>>> SKL
>>>>>>>>>> drm/i915: Add NEEDS_FORCEWAKE() checks for vlv/chv
>>>>>>>>>> drm/i915: Use paramtrized WRPLL_CTL()
>>>>>>>>>> drm/i915: Print a debug message when exceeding dotclock limit
>>>>>>>>>> on pre-gen4
>>>>>>>>>> drm/i915: Don't use intel_pipe_to_cpu_transcoder() when
>>>>>>>>>> there's a pipe config around
>>>>>>>>>> drm/i915: Set sync polarity from adjusted mode for
>>>>>>>>>> TRANS_DP_CTL
>>>>>>>>>> drm/i915: Enable PCH FIFO underruns later on ILK/SNB/IVB
>>>>>>>>>> drm/i915: Enable PCH FIFO underruns later on HSW+
>>>>>>>>>> drm/i915: Re-enable PCH FIO underrun reporting after pipe has
>>>>>>>>>> been disabled
>>>>>>>>>> drm/i915: Check for FIFO underruns after modeset on IVB/HSW
>>>>>>>>>> and CPT/PPT
>>>>>>>>>> drm/i915: Check for CPT and not !IBX in
>>>>>>>>>> ironlake_disable_pch_transcoder()
>>>>>>>>>> drm/i915: Disable FIFO underrun reporting around IBX
>>>>>>>>>> transcoder B workaround
>>>>>>>>>> drm/i915: Hide underruns from eDP PLL and port enable on ILK
>>>>>>>>>> drm/i915: s/DP_PLL_FREQ_160MHZ/DP_PLL_FREQ_162MHZ/
>>>>>>>>>> drm/i915: Remove ILK-A eDP PLL workaround notes
>>>>>>>>>> drm/i915: Clean up eDP PLL state asserts
>>>>>>>>>> drm/i915: Use intel_dp->DP in eDP PLL setup
>>>>>>>>>> drm/i915: Configure eDP PLL freq from ironlake_edp_pll_on()
>>>>>>>>>> drm/i915: Setup DDI clk for MST on SKL
>>>>>>>>>> drm/i915: Kill intel_runtime_pm_disable()
>>>>>>>>>> drm/i915: Do fbdev fini first during unload
>>>>>>>>>> drm/i915: Move the fbdev async_schedule() into intel_fbdev.c
>>>>>>>>>> drm/i915: Replace aux_ch_ctl_reg check with port check
>>>>>>>>>> drm/i915: Replace the aux ddc name switch statement with
>>>>>>>>>> kasprintf()
>>>>>>>>>> drm/i915: Parametrize AUX registers
>>>>>>>>>> drm/i915: Remove the magic AUX_CTL is at DP + foo tricks
>>>>>>>>>> drm/i915: Store aux data reg offsets in intel_dp-
>>>>>>>>>>>
>>>>>>>>>>> aux_ch_data_reg[]
>>>>>>>>>> drm/i915: Add dev_priv->psr_mmio_base
>>>>>>>>>> drm/i915: Model PSR AUX register selection more like the
>>>>>>>>>> normal AUX code
>>>>>>>>>> drm/i915: Remove DDI power domain exclusion
>>>>>>>>>> SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS
>>>>>>>>>> drm/i915: s/PCH_DP_/PORT_/ in intel_trans_dp_port_sel() and
>>>>>>>>>> move it next to its only user
>>>>>>>>>> drm/i915: s/is_sdvob/enum port/
>>>>>>>>>> drm/i915: Store DVO SRCDIM register offset under
>>>>>>>>>> intel_dvo_device
>>>>>>>>>> drm/i915: Streamline gpio_mmio_base deduction
>>>>>>>>>> drm/i915: Prefix raw register defines with underscore
>>>>>>>>>> drm/i915: Parametrize L3 error registers
>>>>>>>>>> drm/i915: Parametrize MOCS registers
>>>>>>>>>> drm/i915: s/0x50/RING_PSMI_CTL/
>>>>>>>>>> drm/i915: Make the high dword offset more explicit in
>>>>>>>>>> i915_reg_read_ioctl
>>>>>>>>>> drm/i915: Make the cmd parser 64bit regs explicit
>>>>>>>>>> drm/i915: Add functions to emit register offsets to the ring
>>>>>>>>>> drm/i915: Add wa_ctx_emit_reg()
>>>>>>>>>> drm/i915: Wrap ASSIGN_CTX_{PDP,PM4L} in do {} while(0)
>>>>>>>>>> drm/i915: Give names to more ring registers
>>>>>>>>>> drm/i915: Wrap context LRI init in a macro
>>>>>>>>>> drm/i915: Turn vgpu pdps into an array
>>>>>>>>>> drm/i915: Pull the vgpu uncore funcs apart from the rest of
>>>>>>>>>> gen6+
>>>>>>>>>> drm/i915: Add 'offset' to uncore funcs
>>>>>>>>>> drm/i915: Add missing ')' to SKL_PS_ECC_STAT define
>>>>>>>>>> drm/i915: Type safe register read/write
>>>>>>>>>> drm/i915: Suppress spurious CPU FIFO underruns on ILK-IVB
>>>>>>>>>> drm/i915: Disable CPU underruns around eDP port and vdd
>>>>>>>>>> enable on ILK-IVB
>>>>>>>>>> drm/i915: Check for underruns after crtc disable
>>>>>>>>>> drm/i915: Don't register CRT connector when it's fused off
>>>>>>>>>> drm: Pass the user drm_mode_fb_cmd2 as const to .fb_create()
>>>>>>>>>> drm: Add "prefix" parameter to drm_rect_debug_print()
>>>>>>>>>> drm/i915: Make ibx_{enable,disable}_display_interrupt()
>>>>>>>>>> static inlines
>>>>>>>>>> drm/i915: Make ironlake_{enable,disable}_display_irq() static
>>>>>>>>>> inlines
>>>>>>>>>> drm/i915: Introduce bdw_{update,enable,disable}_pipe_irq()
>>>>>>>>>> drm/i915: Fix kerneldoc indent fails
>>>>>>>>>> drm/i915: Don't use crtc->config when reading out infoframe
>>>>>>>>>> state
>>>>>>>>>> drm/i915: Use intel_pipe_will_have_type() in
>>>>>>>>>> ironlake_crtc_compute_clock()
>>>>>>>>>> drm/i915: Fix VBT backlight Hz to PWM conversion for PNV
>>>>>>>>>> drm/i915: Fix vbt PWM max setup for CTG
>>>>>>>>>> drm/i915: Add HAS_PCH_LPT_H()
>>>>>>>>>> drm/i915: Kill duplicated PNV .get_display_clock_speed()
>>>>>>>>>> assignment
>>>>>>>>>> drm/i915: Round the AUX clock divider to closest on all
>>>>>>>>>> platforms
>>>>>>>>>> drm/i915: Use cached cdclk_freq for PWM calculations
>>>>>>>>>> drm/i915: Don't register the CRT connector when it's fused
>>>>>>>>>> off on LPT-H
>>>>>>>>>> drm/i915: Don't register CRT connector when DDI E can't be
>>>>>>>>>> used
>>>>>>>>>> drm/i915: Check VBT for CRT port presence on HSW/BDW
>>>>>>>>>> drm/i915: Add "missing" break to haswell_get_ddi_pll()
>>>>>>>>>> drm/i915: Disable CLKOUT_DP bending on LPT/WPT as needed
>>>>>>>>>> drm/i915: Round to closest when computing the VGA dotclock
>>>>>>>>>> for LPT-H
>>>>>>>>>> drm/i915: Disable FDI after the CRT port on LPT-H
>>>>>>>>>> drm/i915: Refactor LPT-H VGA dotclock disabling
>>>>>>>>>> drm/i915: Disable LPT-H VGA dotclock during crtc disable
>>>>>>>>>> drm/i915: Leave FDI running after failed link training on
>>>>>>>>>> LPT-H
>>>>>>>>>> drm: Pass 'name' to drm_crtc_init_with_planes()
>>>>>>>>>> drm: Pass 'name' to drm_universal_plane_init()
>>>>>>>>>> drm: Pass 'name' to drm_encoder_init()
>>>>>>>>>> drm/i915: Fix AVI/HDMI/SPD infoframes on HSW+
>>>>>>>>>> drm/i915: Fix NULL plane->fb oops on SKL
>>>>>>>>>> drm/i915: Fix hpd live status bits for g4x
>>>>>>>>>> drm/i915: Actually retry with bit-banging after GMBUS timeout
>>>>>>>>>>
>>>>>>>>>> Vincent Stehlé (1):
>>>>>>>>>> ASoC: Intel: Skylake: fix typo in sizeof
>>>>>>>>>>
>>>>>>>>>> Vinod Koul (34):
>>>>>>>>>> ASoC: Intel: Skylake: Fix skl machine driver creation
>>>>>>>>>> ASoC: Intel: Skylake: Use the fw name from ACPI mach table
>>>>>>>>>> ASoC: Intel: Skylake: Fix substream dereference before check
>>>>>>>>>> ASoC: Intel: Skylake: Fix resource cleanup on teardown
>>>>>>>>>> ASoC: Intel: Move apci find machine routines
>>>>>>>>>> ASoC: Intel: Atom: move atom driver to common acpi match
>>>>>>>>>> ASoC: Intel: add fw name to common dsp context
>>>>>>>>>> ASoC: Intel: Skylake: Constrain the audio devices
>>>>>>>>>> ASoC: Intel: Skylake: Update the rtd query
>>>>>>>>>> ASoC: Intel: Skylake: Fix test of a field address
>>>>>>>>>> ASoC: Intel: Skylake: Move up pipe mem free
>>>>>>>>>> ASoC: Intel: Skylake: add wov as int sink
>>>>>>>>>> ASoC: Intel: Skylake: Fix the dapm machine map
>>>>>>>>>> ASoC: Intel: Skylake: manage link power in active suspend
>>>>>>>>>> ASoC: Intel: Skylake: Fix the memory overwrite of tlv buffer
>>>>>>>>>> ASoC: Intel: Skylake: Remove autosuspend delay
>>>>>>>>>> ASoC: Intel: Create independent acpi match module
>>>>>>>>>> ASoC: Intel: Add module tags for common match module
>>>>>>>>>> ASoC: Intel: Skylake: Update the delay check
>>>>>>>>>> ASoC: Intel: Skylake: Generate topology name for NHLT table
>>>>>>>>>> header
>>>>>>>>>> ASoC: core: mark SND_SOC_BYTES_EXT as deprecated
>>>>>>>>>> ASoC: Intel: Skylake: free codec objects on removal
>>>>>>>>>> ASoC: Intel: Skylake: Call i915 exit last
>>>>>>>>>> ASoC: Intel: Skylake: remove call to pci_dev_put
>>>>>>>>>> ASoC: Intel: Skylake: add link mangement
>>>>>>>>>> ASoC: Intel: Skylake: Move module id defines
>>>>>>>>>> ASoC: Intel: Skylake: Fix whitepsace issues
>>>>>>>>>> ASoC: Intel: Skylake: Fix kbuild dependency
>>>>>>>>>> ASoC: Intel: Skylake: Freeup properly on skl_dsp_free
>>>>>>>>>> ASoC: dapm: add a dapm sink widget
>>>>>>>>>> ASoC: core: refactor soc_link_dai_widgets()
>>>>>>>>>> ALSA: hda: fix the missing ptr initialization
>>>>>>>>>> ALSA: hdac: add link pm and ref counting
>>>>>>>>>> ALSA: hda: use list macro for parsing on cleanup
>>>>>>>>>>
>>>>>>>>>> Wayne Boyer (6):
>>>>>>>>>> drm/i915: Clean up device info structure definitions
>>>>>>>>>> drm/i915: Separate cherryview from valleyview
>>>>>>>>>> drm/i915: Use HAS_PCH_SPLIT to determine correct devices
>>>>>>>>>> drm/i915: Remove VLV A0 hack
>>>>>>>>>> drm/i915: Only set gem object L3 cache level for IVB devices
>>>>>>>>>> drm/i915: Remove BUG_ON call in vlv_enable_pll
>>>>>>>>>>
>>>>>>>>>> Yong Zhi (2):
>>>>>>>>>> ASoc: Intel: boards: update ignore suspend for
>>>>>>>>>> nau88l25_ssm4567 machine
>>>>>>>>>> ASoc: Intel: boards: update constraints for nau88l25_ssm4567
>>>>>>>>>> machine
>>>>>>>>>>
>>>>>>>>>> Zeng Zhaoxiu (1):
>>>>>>>>>> i915: Replace "hweight8(dev_priv->info.subslice_7eu[i]) != 1"
>>>>>>>>>> with "!is_power_of_2(dev_priv->info.subslice_7eu[i])"
>>>>>>>>>>
>>>>>>>>>> jim.bride at linux.intel.com (1):
>>>>>>>>>> drm/i915/skl: Update DDI translation tables for SKL
>>>>>>>>>>
>>>>>>>>>> Documentation/DocBook/gpu.tmpl | 290 +--
>>>>>>>>>> Documentation/kernel-parameters.txt | 4 +
>>>>>>>>>> arch/x86/include/asm/platform_sst_audio.h | 1 +
>>>>>>>>>> drivers/gpio/gpiolib.c | 15 +-
>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 1 -
>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 14 +-
>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 14 +-
>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 14 +-
>>>>>>>>>> drivers/gpu/drm/armada/armada_crtc.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/armada/armada_fb.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/armada/armada_fb.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/armada/armada_overlay.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/ast/ast_drv.h | 3 +-
>>>>>>>>>> drivers/gpu/drm/ast/ast_fb.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/ast/ast_main.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/ast/ast_mode.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/bochs/bochs.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/bochs/bochs_fbdev.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/bochs/bochs_kms.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/bochs/bochs_mm.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/cirrus/cirrus_drv.h | 3 +-
>>>>>>>>>> drivers/gpu/drm/cirrus/cirrus_fbdev.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/cirrus/cirrus_main.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/cirrus/cirrus_mode.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/drm_atomic.c | 64 +-
>>>>>>>>>> drivers/gpu/drm/drm_atomic_helper.c | 60 +-
>>>>>>>>>> drivers/gpu/drm/drm_crtc.c | 81 +-
>>>>>>>>>> drivers/gpu/drm/drm_crtc_helper.c | 26 +-
>>>>>>>>>> drivers/gpu/drm/drm_dp_mst_topology.c | 38 +-
>>>>>>>>>> drivers/gpu/drm/drm_fb_cma_helper.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/drm_modes.c | 15 +-
>>>>>>>>>> drivers/gpu/drm/drm_modeset_lock.c | 14 +-
>>>>>>>>>> drivers/gpu/drm/drm_plane_helper.c | 5 +-
>>>>>>>>>> drivers/gpu/drm/drm_prime.c | 16 +-
>>>>>>>>>> drivers/gpu/drm/drm_rect.c | 7 +-
>>>>>>>>>> drivers/gpu/drm/exynos/exynos_dp_core.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/exynos/exynos_drm_crtc.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/exynos/exynos_drm_dpi.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/exynos/exynos_drm_fb.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/exynos/exynos_drm_fb.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/exynos/exynos_drm_vidi.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/exynos/exynos_hdmi.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/gma500/cdv_intel_crt.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/gma500/cdv_intel_dp.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/gma500/cdv_intel_hdmi.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/gma500/cdv_intel_lvds.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/gma500/framebuffer.c | 6 +-
>>>>>>>>>> drivers/gpu/drm/gma500/mdfld_dsi_dpi.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/gma500/oaktrail_hdmi.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/gma500/oaktrail_lvds.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/gma500/psb_intel_lvds.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/gma500/psb_intel_sdvo.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/i2c/tda998x_drv.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/Makefile | 1 +
>>>>>>>>>> drivers/gpu/drm/i915/dvo.h | 15 +-
>>>>>>>>>> drivers/gpu/drm/i915/dvo_ch7017.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/dvo_ch7xxx.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/dvo_ivch.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/dvo_ns2501.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/dvo_sil164.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/dvo_tfp410.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_cmd_parser.c | 37 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_debugfs.c | 455 ++--
>>>>>>>>>> drivers/gpu/drm/i915/i915_dma.c | 49 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_drv.c | 381 ++-
>>>>>>>>>> drivers/gpu/drm/i915/i915_drv.h | 304 ++-
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem.c | 165 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem_context.c | 21 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem_evict.c | 39 +
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem_execbuffer.c | 80 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem_fence.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem_gtt.c | 139 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem_gtt.h | 56 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem_render_state.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem_stolen.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem_tiling.c | 4 +
>>>>>>>>>> drivers/gpu/drm/i915/i915_gem_userptr.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_gpu_error.c | 40 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_guc_reg.h | 53 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_guc_submission.c | 51 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_irq.c | 297 ++-
>>>>>>>>>> drivers/gpu/drm/i915/i915_params.c | 10 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_reg.h | 2833
>>>>>>>>>> +++++++++++-----------
>>>>>>>>>> drivers/gpu/drm/i915/i915_suspend.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_sysfs.c | 13 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_trace.h | 4 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_vgpu.c | 6 +-
>>>>>>>>>> drivers/gpu/drm/i915/i915_vgpu.h | 14 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_atomic.c | 5 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_atomic_plane.c | 2 +
>>>>>>>>>> drivers/gpu/drm/i915/intel_audio.c | 121 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_bios.c | 168 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_bios.h | 4 -
>>>>>>>>>> drivers/gpu/drm/i915/intel_crt.c | 64 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_csr.c | 297 ++-
>>>>>>>>>> drivers/gpu/drm/i915/intel_ddi.c | 309 ++-
>>>>>>>>>> drivers/gpu/drm/i915/intel_display.c | 1314 ++++++----
>>>>>>>>>> drivers/gpu/drm/i915/intel_dp.c | 1166 ++++-----
>>>>>>>>>> drivers/gpu/drm/i915/intel_dp_link_training.c | 342 +++
>>>>>>>>>> drivers/gpu/drm/i915/intel_dp_mst.c | 44 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_drv.h | 267 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_dsi.c | 114 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_dsi.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 16 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_dsi_pll.c | 6 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_dvo.c | 29 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_fbc.c | 742 +++---
>>>>>>>>>> drivers/gpu/drm/i915/intel_fbdev.c | 62 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_fifo_underrun.c | 143 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_guc.h | 12 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_guc_fwif.h | 72 +
>>>>>>>>>> drivers/gpu/drm/i915/intel_guc_loader.c | 105 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_hdmi.c | 142 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_hotplug.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_i2c.c | 88 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_lrc.c | 195 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_lrc.h | 19 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_lvds.c | 27 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_mocs.c | 61 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_opregion.c | 79 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_overlay.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_panel.c | 201 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_pm.c | 708 +++---
>>>>>>>>>> drivers/gpu/drm/i915/intel_psr.c | 146 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_ringbuffer.c | 206 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_ringbuffer.h | 15 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_runtime_pm.c | 806 ++++--
>>>>>>>>>> drivers/gpu/drm/i915/intel_sdvo.c | 64 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_sprite.c | 34 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_tv.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/i915/intel_uncore.c | 284 ++-
>>>>>>>>>> drivers/gpu/drm/imx/dw_hdmi-imx.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/imx/imx-drm-core.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/imx/imx-ldb.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/imx/imx-tve.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/imx/ipuv3-plane.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/imx/parallel-display.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/mgag200/mgag200_drv.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/mgag200/mgag200_fb.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/mgag200/mgag200_main.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/mgag200/mgag200_mode.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/msm/mdp/mdp4/mdp4_dtv_encoder.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/msm/mdp/mdp4/mdp4_lcdc_encoder.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/msm/msm_drv.h | 4 +-
>>>>>>>>>> drivers/gpu/drm/msm/msm_fb.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/nouveau/dispnv04/dac.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/nouveau/dispnv04/dfp.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/nouveau/dispnv04/tvnv04.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/nouveau/nouveau_display.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/nouveau/nouveau_display.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/nouveau/nouveau_fbcon.h | 1 -
>>>>>>>>>> drivers/gpu/drm/nouveau/nv50_display.c | 6 +-
>>>>>>>>>> drivers/gpu/drm/omapdrm/omap_crtc.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/omapdrm/omap_drv.h | 6 +-
>>>>>>>>>> drivers/gpu/drm/omapdrm/omap_encoder.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/omapdrm/omap_fb.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/omapdrm/omap_plane.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/qxl/qxl_display.c | 6 +-
>>>>>>>>>> drivers/gpu/drm/qxl/qxl_drv.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/qxl/qxl_fb.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/radeon/atombios_encoders.c | 30 +-
>>>>>>>>>> drivers/gpu/drm/radeon/radeon_display.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/radeon/radeon_dp_mst.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/radeon/radeon_fb.c | 1 -
>>>>>>>>>> drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 15 +-
>>>>>>>>>> drivers/gpu/drm/radeon/radeon_mode.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/rcar-du/rcar_du_kms.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/rcar-du/rcar_du_plane.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/rockchip/rockchip_drm_fb.c | 6 +-
>>>>>>>>>> drivers/gpu/drm/rockchip/rockchip_drm_fb.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 +-
>>>>>>>>>> drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/shmobile/shmob_drm_kms.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/sti/sti_crtc.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/sti/sti_cursor.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/sti/sti_gdp.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/sti/sti_hqvdp.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/sti/sti_tvout.c | 7 +-
>>>>>>>>>> drivers/gpu/drm/tegra/dc.c | 11 +-
>>>>>>>>>> drivers/gpu/drm/tegra/drm.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/tegra/dsi.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/tegra/fb.c | 4 +-
>>>>>>>>>> drivers/gpu/drm/tegra/hdmi.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/tegra/rgb.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/tegra/sor.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/tilcdc/tilcdc_drv.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/tilcdc/tilcdc_panel.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/udl/udl_drv.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/udl/udl_encoder.c | 3 +-
>>>>>>>>>> drivers/gpu/drm/udl/udl_fb.c | 5 +-
>>>>>>>>>> drivers/gpu/drm/vc4/vc4_crtc.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/vc4/vc4_plane.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/virtio/virtgpu_display.c | 8 +-
>>>>>>>>>> drivers/gpu/drm/virtio/virtgpu_drv.h | 2 +-
>>>>>>>>>> drivers/gpu/drm/virtio/virtgpu_fb.c | 1 -
>>>>>>>>>> drivers/gpu/drm/virtio/virtgpu_plane.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 2 +-
>>>>>>>>>> drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 2 +-
>>>>>>>>>> drivers/i2c/busses/i2c-designware-platdrv.c | 50 +-
>>>>>>>>>> drivers/mfd/arizona-i2c.c | 246 +-
>>>>>>>>>> drivers/mmc/card/block.c | 19 +-
>>>>>>>>>> drivers/mmc/core/host.c | 22 +
>>>>>>>>>> drivers/mmc/host/sdhci-pci-core.c | 26 +-
>>>>>>>>>> drivers/pci/bus.c | 1 +
>>>>>>>>>> drivers/pci/hotplug/acpiphp_glue.c | 8 +-
>>>>>>>>>> drivers/pci/pci-driver.c | 10 +-
>>>>>>>>>> drivers/pci/pci-sysfs.c | 5 +
>>>>>>>>>> drivers/pci/pci.c | 176 ++
>>>>>>>>>> drivers/pci/pci.h | 2 +
>>>>>>>>>> drivers/pci/pcie/portdrv_core.c | 2 +
>>>>>>>>>> drivers/pci/pcie/portdrv_pci.c | 52 +-
>>>>>>>>>> drivers/pci/quirks.c | 4 +-
>>>>>>>>>> drivers/pci/remove.c | 2 +
>>>>>>>>>> drivers/pinctrl/intel/pinctrl-intel.c | 45 +-
>>>>>>>>>> drivers/usb/host/xhci-pci.c | 2 +-
>>>>>>>>>> include/drm/drmP.h | 3 +
>>>>>>>>>> include/drm/drm_atomic.h | 6 +-
>>>>>>>>>> include/drm/drm_crtc.h | 50 +-
>>>>>>>>>> include/drm/drm_crtc_helper.h | 2 +-
>>>>>>>>>> include/drm/drm_dp_mst_helper.h | 9 +-
>>>>>>>>>> include/drm/drm_fb_cma_helper.h | 2 +-
>>>>>>>>>> include/drm/drm_modes.h | 343 ++-
>>>>>>>>>> include/drm/drm_rect.h | 3 +-
>>>>>>>>>> include/drm/i915_component.h | 14 +
>>>>>>>>>> include/drm/i915_pciids.h | 49 +-
>>>>>>>>>> include/linux/gpio/driver.h | 14 +-
>>>>>>>>>> include/linux/mmc/host.h | 4 +
>>>>>>>>>> include/linux/pci.h | 3 +
>>>>>>>>>> include/sound/hda_chmap.h | 78 +
>>>>>>>>>> include/sound/hda_i915.h | 14 +
>>>>>>>>>> include/sound/hdaudio.h | 2 +-
>>>>>>>>>> include/sound/hdaudio_ext.h | 13 +
>>>>>>>>>> include/sound/soc-dai.h | 1 +
>>>>>>>>>> include/sound/soc-dapm.h | 4 +
>>>>>>>>>> include/sound/soc-topology.h | 6 +-
>>>>>>>>>> include/sound/soc.h | 53 +-
>>>>>>>>>> include/uapi/drm/i915_drm.h | 23 +-
>>>>>>>>>> include/uapi/sound/asoc.h | 2 +-
>>>>>>>>>> init/main.c | 42 +
>>>>>>>>>> sound/hda/Makefile | 2 +-
>>>>>>>>>> sound/hda/ext/hdac_ext_bus.c | 4 +
>>>>>>>>>> sound/hda/ext/hdac_ext_controller.c | 64 +-
>>>>>>>>>> sound/hda/ext/hdac_ext_stream.c | 6 +-
>>>>>>>>>> sound/hda/hdac_controller.c | 24 +-
>>>>>>>>>> sound/hda/hdac_i915.c | 95 +-
>>>>>>>>>> sound/hda/hdmi_chmap.c | 827 +++++++
>>>>>>>>>> sound/hda/local.h | 10 +
>>>>>>>>>> sound/pci/hda/hda_controller.c | 55 +-
>>>>>>>>>> sound/pci/hda/hda_controller.h | 6 +-
>>>>>>>>>> sound/pci/hda/hda_eld.c | 32 +-
>>>>>>>>>> sound/pci/hda/hda_intel.c | 51 +-
>>>>>>>>>> sound/pci/hda/hda_tegra.c | 5 +-
>>>>>>>>>> sound/pci/hda/patch_hdmi.c | 1742 +++++++---
>>>>>>>>>> ---
>>>>>>>>>> sound/soc/codecs/hdac_hdmi.c | 163 +-
>>>>>>>>>> sound/soc/generic/simple-card.c | 12 +-
>>>>>>>>>> sound/soc/intel/Kconfig | 107 +-
>>>>>>>>>> sound/soc/intel/atom/sst-atom-controls.c | 1 +
>>>>>>>>>> sound/soc/intel/atom/sst-atom-controls.h | 1 +
>>>>>>>>>> sound/soc/intel/atom/sst-mfld-platform-pcm.c | 24 +-
>>>>>>>>>> sound/soc/intel/atom/sst/sst_acpi.c | 70 +-
>>>>>>>>>> sound/soc/intel/boards/Makefile | 10 +
>>>>>>>>>> sound/soc/intel/boards/bxt_florida.c | 595 +++++
>>>>>>>>>> sound/soc/intel/boards/bxt_rt298.c | 357 +++
>>>>>>>>>> sound/soc/intel/boards/bytcr_rt5651.c | 332 +++
>>>>>>>>>> sound/soc/intel/boards/cht_bsw_max98090_ti.c | 24 +-
>>>>>>>>>> sound/soc/intel/boards/cht_bsw_rt5645.c | 20 +-
>>>>>>>>>> sound/soc/intel/boards/cht_bsw_rt5672.c | 7 +-
>>>>>>>>>> sound/soc/intel/boards/skl_nau88l25_max98357a.c | 640 +++++
>>>>>>>>>> sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 696 ++++++
>>>>>>>>>> sound/soc/intel/boards/skl_rt286.c | 283 ++-
>>>>>>>>>> sound/soc/intel/common/Makefile | 7 +-
>>>>>>>>>> sound/soc/intel/common/sst-acpi.c | 45 +-
>>>>>>>>>> sound/soc/intel/common/sst-acpi.h | 36 +
>>>>>>>>>> sound/soc/intel/common/sst-dsp-priv.h | 9 +-
>>>>>>>>>> sound/soc/intel/common/sst-dsp.c | 2 +-
>>>>>>>>>> sound/soc/intel/common/sst-dsp.h | 2 +-
>>>>>>>>>> sound/soc/intel/common/sst-firmware.c | 4 +-
>>>>>>>>>> sound/soc/intel/common/sst-match-acpi.c | 82 +
>>>>>>>>>> sound/soc/intel/haswell/sst-haswell-dsp.c | 2 +-
>>>>>>>>>> sound/soc/intel/haswell/sst-haswell-ipc.c | 33 +-
>>>>>>>>>> sound/soc/intel/skylake/Makefile | 2 +-
>>>>>>>>>> sound/soc/intel/skylake/bxt-sst.c | 332 +++
>>>>>>>>>> sound/soc/intel/skylake/skl-messages.c | 538 ++--
>>>>>>>>>> sound/soc/intel/skylake/skl-nhlt.c | 68 +-
>>>>>>>>>> sound/soc/intel/skylake/skl-pcm.c | 498 +++-
>>>>>>>>>> sound/soc/intel/skylake/skl-sst-cldma.c | 97 +-
>>>>>>>>>> sound/soc/intel/skylake/skl-sst-dsp.c | 17 +-
>>>>>>>>>> sound/soc/intel/skylake/skl-sst-dsp.h | 41 +-
>>>>>>>>>> sound/soc/intel/skylake/skl-sst-ipc.c | 123 +-
>>>>>>>>>> sound/soc/intel/skylake/skl-sst-ipc.h | 14 +
>>>>>>>>>> sound/soc/intel/skylake/skl-sst.c | 222 +-
>>>>>>>>>> sound/soc/intel/skylake/skl-topology.c | 960 ++++++--
>>>>>>>>>> sound/soc/intel/skylake/skl-topology.h | 98 +-
>>>>>>>>>> sound/soc/intel/skylake/skl-tplg-interface.h | 106 +-
>>>>>>>>>> sound/soc/intel/skylake/skl.c | 361 ++-
>>>>>>>>>> sound/soc/intel/skylake/skl.h | 29 +-
>>>>>>>>>> sound/soc/sh/rcar/core.c | 2 +-
>>>>>>>>>> sound/soc/sh/rcar/rsrc-card.c | 6 +-
>>>>>>>>>> sound/soc/soc-core.c | 866 ++++---
>>>>>>>>>> sound/soc/soc-dapm.c | 12 +-
>>>>>>>>>> sound/soc/soc-ops.c | 4 +-
>>>>>>>>>> sound/soc/soc-pcm.c | 22 +-
>>>>>>>>>> sound/soc/soc-topology.c | 2 +
>>>>>>>>>> 329 files changed, 18268 insertions(+), 8697 deletions(-)
>>>>>>>>>> create mode 100644 drivers/gpu/drm/i915/intel_dp_link_training.c
>>>>>>>>>> create mode 100644 include/sound/hda_chmap.h
>>>>>>>>>> create mode 100644 sound/hda/hdmi_chmap.c
>>>>>>>>>> create mode 100644 sound/soc/intel/boards/bxt_florida.c
>>>>>>>>>> create mode 100644 sound/soc/intel/boards/bxt_rt298.c
>>>>>>>>>> create mode 100644 sound/soc/intel/boards/bytcr_rt5651.c
>>>>>>>>>> create mode 100644 sound/soc/intel/boards/skl_nau88l25_max98357a.c
>>>>>>>>>> create mode 100644 sound/soc/intel/boards/skl_nau88l25_ssm4567.c
>>>>>>>>>> create mode 100644 sound/soc/intel/common/sst-acpi.h
>>>>>>>>>> create mode 100644 sound/soc/intel/common/sst-match-acpi.c
>>>>>>>>>> create mode 100644 sound/soc/intel/skylake/bxt-sst.c
>>>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
More information about the linux-yocto
mailing list