[linux-yocto] [PATCH] ARM: dts: am335x-boneblack: configure i2c1 and 2

[Nishanth Menon]

On 06/01/2016 01:29 PM, Bruce Ashfield wrote:
> On 2016-05-31 10:43 PM, Li, Yong B wrote:
>> Thanks Nishanth for your information. I find the 5d1a2961adf9 commit in linux-omap. It seems to me that it only enables the I2C2 bus. Is it correct? We want to enable both the I2C1 and I2C2 buses for external i2c devices.
>>
> 
> As long as it works for what you need (i.e. you've tested it), and
> the patch is from some public repo that I can refernece. I'm ok
> with merging it.
> 
>> Hi Bruce, the original source for the patch is https://github.com/nmenon/powertool/blob/master/kernel-patches/0001-v3.15.0-ARM-dts-am335x-boneblack-configure-i2c1-and-2.patch
> 
> That's fine with me, can you update the commit log and re-submit the
> patch ? Preferably with a short summary of how you tested the change
> as well.


the patch was created by me on an ancient kernel previously because
there was no dt overlay support. neither i2c1 nor i2c2 are necessary
for BBB to function. as the original author of the patch, I have to
request a NAK. it was specifically done for a power measurement tool
that i had written which runs on BBB (it uses i2c to read INA226
measurement IC)


-- 
Regards,
Nishanth Menon