[linux-yocto] [PULL REQUEST] add standard/bxt-rebase branch
Bruce Ashfield
bruce.ashfield at windriver.com
Wed Jun 1 10:24:47 PDT 2016
On 2016-06-01 1:21 PM, Tom Zanussi wrote:
> On 06/01/2016 11:57 AM, Bruce Ashfield wrote:
>> On 2016-06-01 12:56 PM, Tom Zanussi wrote:
>>> On 06/01/2016 11:50 AM, Bruce Ashfield wrote:
>>>> On 2016-06-01 11:36 AM, Saul Wold wrote:
>>>>> On Tue, 2016-05-31 at 23:31 -0400, Bruce Ashfield wrote:
>>>>>>
>>>>>> On 2016-05-31 6:24 PM, Ranostay, Matt wrote:
>>>>>>>
>>>>>>>
>>>>>>> This pull request is for adding the standard/bxt-rebase branch with
>>>>>>> has various backports from 4.6 and 4.5, which are have an
>>>>>>> unacceptable risk of breaking other platforms.
>>>>>>> This is based on standard/intel and will be rebased. Thus nobody
>>>>>>> should expect the history to be linear.
>>>>>> Seems sane to me.
>>>>>>
>>>>>> One minor question though. To keep the branch naming and inheritance
>>>>>> sane, I'd create this as standard/intel/bxt-rebase
>>>>>>
>>>>>> Any objections ?
>>>>>>
>>>>> This is actually what I had asked for (standard/intel/bxt-rebase) so no
>>>>> objections here.
>>>>
>>>> And crap. I wasn't thinking clearly when I created standard/intel, that
>>>> now needs to become standard/intel/base.
>>>>
>>>> We'll run into the git fetch not being able to update local copies of
>>>> the repo (unless they are full cleared).
>>>>
>>>> I typically do create these as /base .. but forgot this time.
>>>>
>>>> Tom: we need to coordinate KBRANCH updates .. how did you want to do
>>>> that ?
>>>>
>>>
>>> Hmm, I thought the plan was to have a standard/intel based on
>>> standard/base, which is what we have...
>>>
>>> All this rebase stuff should be based on standard/intel, right?
>>
>> Yep, and if we want to show that inheritance properly, it shouldbve
>> standard/intel/<rebase branch> .. that's the kicker.
>>
>
> So why can't we do something like standard/intel-rebase-branch based on
> standard/intel and avoid the problem, since these are supposed to be
> temporary one-off staging branches anyway?
I could live with standard/intel-rebase, it doesn't exactly match the
inheritance notation .. but it is close enough.
I've made a note to generate all future repos with /base
Bruce
>
> Tom
>
>> Bruce
>>
>>>
>>> Tom
>>>
>>>
>>>> Bruce
>>>>
>>>>>
>>>>> Sau!
>>>>>
>>>>>>
>>>>>> Bruce
>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> The following changes since commit
>>>>>>> 53e84104c5e68eb468823dd0d262a64623d01a55:
>>>>>>>
>>>>>>> mmc: mmc: Fix partition switch timeout for some eMMCs (2016-05-
>>>>>>> 19
>>>>>>> 17:15:25 -0700)
>>>>>>>
>>>>>>> are available in the git repository at:
>>>>>>>
>>>>>>> git://sandbox.sakoman.com/linux-yocto-4.4.git standard/bxt-rebase
>>>>>>>
>>>>>>> for you to fetch changes up to
>>>>>>> 1203930e034957e1fc9e0c4842ecd7922d5e0897:
>>>>>>>
>>>>>>> [UPSTREAM] ASoC: skylake: added WARN_ON invalid dsp (2016-05-27
>>>>>>> 17:21:19 -0700)
>>>>>>>
>>>>>>> ----------------------------------------------------------------
>>>>>>> Aaron Plattner (1):
>>>>>>> ALSA: hda - Add new GPU codec ID 0x10de0083 to snd-hda
>>>>>>>
>>>>>>> Adrian Hunter (4):
>>>>>>> mmc: core: Add a facility to "pause" re-tuning
>>>>>>> mmc: block: Pause re-tuning while switched to the RPMB
>>>>>>> partition
>>>>>>> mmc: block: Always switch back to main area after RPMB access
>>>>>>> mmc: sdhci-pci: Remove MMC_CAP_BUS_WIDTH_TEST for Intel
>>>>>>> controller
>>>>>>>
>>>>>>> Alan (1):
>>>>>>> ASoC: Intel: Skylake: fix pointer scaling
>>>>>>>
>>>>>>> Alan Cox (1):
>>>>>>> ASoC: Intel: Skylake: remove bogus comparison of an array
>>>>>>> with NULL
>>>>>>>
>>>>>>> Alex Dai (2):
>>>>>>> drm/i915/guc: Add GuC css header parser
>>>>>>> drm/i915/guc: Clean up locks in GuC
>>>>>>>
>>>>>>> Alex Goins (2):
>>>>>>> i915: wait for fence in mmio_flip_work_func
>>>>>>> i915: wait for fence in prepare_plane_fb
>>>>>>>
>>>>>>> Ander Conselvan de Oliveira (10):
>>>>>>> drm/i915: Don't pass *DP around to link training functions
>>>>>>> drm/i915: Split write of pattern to DP reg from
>>>>>>> intel_dp_set_link_train
>>>>>>> drm/i915 Call get_adjust_train() from clock recovery and
>>>>>>> channel eq
>>>>>>> drm/i915: Move register write into
>>>>>>> intel_dp_set_signal_levels()
>>>>>>> drm/i915: Move generic link training code to a separate file
>>>>>>> drm/i915: Create intel_dp->prepare_link_retrain() hook
>>>>>>> drm/i915: Make intel_dp_source_supports_hbr2() take an
>>>>>>> intel_dp pointer
>>>>>>> drm/i915: Fix SKL i_boost level
>>>>>>> drm/i915: Don't do edp panel detection in g4x_dp_detect()
>>>>>>> drm/i915: Remove platform specific *_dp_detect() functions
>>>>>>>
>>>>>>> Andreas Ziegler (1):
>>>>>>> drm/i915: Remove select to deleted STOP_MACHINE from Kconfig
>>>>>>>
>>>>>>> Animesh Manna (4):
>>>>>>> drm/i915/skl: Making DC6 entry is the last call in suspend
>>>>>>> flow.
>>>>>>> drm/i915/gen9: csr_init after runtime pm enable
>>>>>>> drm/i915/gen9: Use flush_work to synchronize with dmc loader
>>>>>>> drm/i915/skl: Removed assert for csr-fw-loading check during
>>>>>>> disabling dc6
>>>>>>>
>>>>>>> Arun Siluvery (1):
>>>>>>> Revert "drm/i915: Initialize HWS page address after GPU
>>>>>>> reset"
>>>>>>>
>>>>>>> Bamvor Jian Zhang (1):
>>>>>>> gpiolib: make comment consistent with code
>>>>>>>
>>>>>>> Chris Wilson (11):
>>>>>>> drm/i915: Map the ringbuffer using WB on LLC machines
>>>>>>> drm/i915: Report context GTT size
>>>>>>> drm/i915: Add soft-pinning API for execbuffer
>>>>>>> drm/i915: Recover all available ringbuffer space following
>>>>>>> reset
>>>>>>> drm/i915: Serialise updates to GGTT with access through GGTT
>>>>>>> on Braswell
>>>>>>> drm/i915: Fix RPS pointer passed from wait_ioctl to
>>>>>>> i915_wait_request
>>>>>>> drm/i915: Add soft-pinning API for execbuffer
>>>>>>> drm/i915: Pin the ifbdev for the info->system_base GGTT
>>>>>>> mmapping
>>>>>>> drm/i915: Move Braswell stop_machine GGTT insertion
>>>>>>> workaround
>>>>>>> drm/i915: Allow i915_gem_object_get_page() on userptr as well
>>>>>>> drm/i915: Balance assert_rpm_wakelock_held() for
>>>>>>> !IS_ENABLED(CONFIG_PM)
>>>>>>>
>>>>>>> Damien Lespiau (4):
>>>>>>> drm/i915/skl: Store and print the DMC firmware version we
>>>>>>> load
>>>>>>> drm/i915/skl: Print the DMC firmware status in debugfs
>>>>>>> drm/i915/skl: Expose DC5/DC6 entry counts
>>>>>>> drm/i915: Make turning on/off PW1 and Misc I/O part of the
>>>>>>> init/fini sequences
>>>>>>>
>>>>>>> Damien.Horsley (1):
>>>>>>> ASoC: Add SOC_DOUBLE_STS macro
>>>>>>>
>>>>>>> Dan Carpenter (3):
>>>>>>> ASoC: Intel: Skylake: Fix a couple signedness bugs
>>>>>>> ASoC: Intel: Skylake: pointer math issue
>>>>>>> ASoC: Intel: sst: fix a loop timeout in
>>>>>>> sst_hsw_stream_reset()
>>>>>>>
>>>>>>> Daniel Stone (2):
>>>>>>> drm/i915/pm: Unstatic power_domain_str
>>>>>>> drm/i915/pm: Print offending domain in refcount failure
>>>>>>>
>>>>>>> Daniel Vetter (25):
>>>>>>> drm/i915: Fix formatting for gen8_cs_irq_handler
>>>>>>> drm/i915: Update DRIVER_DATE to 20151023
>>>>>>> Revert "drm/i915: Add soft-pinning API for execbuffer"
>>>>>>> drm/i915: Shut up GuC errors when it's disabled
>>>>>>> drm/i915: Don't complain about lack of ACPI video bios
>>>>>>> drm/i915: use correct power domain for csr loading
>>>>>>> drm/i915/gen9: move assert_csr_loaded into intel_rpm.c
>>>>>>> drm/i915/gen9: Remove csr.state, csr_lock and related code.
>>>>>>> drm/i915/gen9: Align line continuations in intel_csr.c.
>>>>>>> drm/i915/gen9: Simplify csr loading failure printing.
>>>>>>> drm/i915/gen9: Don't try to load garbage dmc firmware on
>>>>>>> resume
>>>>>>> drm/i915/gen9: Use dev_priv in csr functions
>>>>>>> drm/i915/gen9: extract parse_csr_fw
>>>>>>> drm/i915: Use request_firmware and our own async work
>>>>>>> drm/i915: Drop return value from intel_fill_fb_ggtt_view
>>>>>>> drm/i915: Stuff rotation params into view union
>>>>>>> drm/i915: Fix i915_ggtt_view_equal to handle rotation
>>>>>>> correctly
>>>>>>> drm/i915: Update DRIVER_DATE to 20151120
>>>>>>> drm/i915: fix fdi related fifo underruns on hsw
>>>>>>> drm/i915: Restore skl_gt3 device info
>>>>>>> Revert "drm/i915: Extend LRC pinning to cover GPU context
>>>>>>> writeback"
>>>>>>> drm/i915: Update DRIVER_DATE to 20151204
>>>>>>> drm: Move drm_display_mode an related docs into kerneldoc
>>>>>>> drm/i915: Update DRIVER_DATE to 20151218
>>>>>>> drm/i915: Tune down rpm wakelock debug checks
>>>>>>>
>>>>>>> Danilo Cesar Lemes de Paula (1):
>>>>>>> drm/doc: Convert to markdown
>>>>>>>
>>>>>>> Dave Gordon (4):
>>>>>>> drm/i915: eliminate 'temp' in gen8_for_each_{pdd, pdpe,
>>>>>>> pml4e} macros
>>>>>>> drm/i915: intel_ring_initialized() must be simple and inline
>>>>>>> drm/i915: mark GEM object pages dirty when mapped & written
>>>>>>> by the CPU
>>>>>>> drm/i915: mark a newly-created GEM object dirty when filled
>>>>>>> with data
>>>>>>>
>>>>>>> Deepak M (4):
>>>>>>> drm/i915: Correct the Ref clock value for BXT
>>>>>>> drm/i915: add VBT address and size fields to ASLE mailbox
>>>>>>> struct
>>>>>>> drm/i915: dual link pipe selection for bxt
>>>>>>> drm/i915: Add Intel opregion mailbox 5 structure
>>>>>>>
>>>>>>> Deepak S (2):
>>>>>>> drm/i915/kbl: Add Kabylake PCI ID
>>>>>>> drm/i915/kbl: Add Kabylake GT4 PCI ID
>>>>>>>
>>>>>>> Dharageswari R (2):
>>>>>>> ASoC: Intel: Skylake: Add support for Loadable modules
>>>>>>> ASoC: Intel: Skylake: Add support for Mic Select module
>>>>>>>
>>>>>>> Dharageswari.R (7):
>>>>>>> ASoC: Intel: Skylake: Use CGCTL.MISCBDCGE for Phrase
>>>>>>> detection notification
>>>>>>> ASoC: Intel: Skylake: Fix pipe memory allocation leak
>>>>>>> ASoC: Intel: Skylake: Get node id using helper
>>>>>>> ASoC: Intel: Skylake: Add skl_tplg_be_get_cpr_module() helper
>>>>>>> ASoC: Intel: Skylake: Add MCLK configuration
>>>>>>> ASoC: Intel: Skylake: Fix the NULL pointer exception in
>>>>>>> dsp_clean up
>>>>>>> ASoC: Intel: Skylake: Prevent sending Set DMA Control IPC if
>>>>>>> the widget is "On"
>>>>>>>
>>>>>>> Fang, Yang A (3):
>>>>>>> ASoC: Intel: Skylake: add adi + nau8825 machine driver entry
>>>>>>> ASoc: Intel: boards: fix dapm map of nau88l25_ssm4567 machine
>>>>>>> ASoc: Intel: boards: Add HDMI/DP links for nau88l25_ssm4567
>>>>>>> machine
>>>>>>>
>>>>>>> Gerd Hoffmann (2):
>>>>>>> drm/i915: more virtual south bridge detection
>>>>>>> drm/i915: refine qemu south bridge detection
>>>>>>>
>>>>>>> Guneshwor Singh (2):
>>>>>>> ASoC: Intel: Skylake: Fix delay wrap condition
>>>>>>> ASoC: Intel: Skylake: Fix mcps freeup after module unbind
>>>>>>> failure
>>>>>>>
>>>>>>> Guruprasad Pawse (1):
>>>>>>> ASoC: Intel: Add Broxton machine driver
>>>>>>>
>>>>>>> Hardik T Shah (3):
>>>>>>> ASoC: Intel: Skylake: Add multiple pin formats
>>>>>>> ASoC: Intel: Skylake: Update the topology interface structure
>>>>>>> ASoC: Intel: Skylake: Add support for module GUIDs
>>>>>>>
>>>>>>> Harsha Priya (1):
>>>>>>> ASoC: Intel: Skylake: Adding nau88l25+ssm4567 machine driver
>>>>>>>
>>>>>>> Imre Deak (42):
>>>>>>> drm/i915/gen9: flush DMC fw loading work during system
>>>>>>> suspend
>>>>>>> drm/i915: get runtime PM reference around GEM set_tiling
>>>>>>> IOCTL
>>>>>>> drm/i915: fix the power well ID for always on wells
>>>>>>> drm/i915: fix lookup_power_well for power wells without any
>>>>>>> domain
>>>>>>> drm/i915: rename intel_power_domains_resume to *_sync_hw
>>>>>>> drm/i915/skl: init/uninit display core as part of the HW
>>>>>>> power domain state
>>>>>>> drm/i915/skl: don't toggle PW1 and MISC power wells on-demand
>>>>>>> drm/i915/gen9: simplify DC toggling code
>>>>>>> drm/i915/skl: disable DC states before display core
>>>>>>> init/uninit
>>>>>>> drm/i915/skl: make sure LCPLL is disabled when uniniting
>>>>>>> CDCLK
>>>>>>> drm/i915: fix handling of the disable_power_well module
>>>>>>> option
>>>>>>> drm/i915: take a power domain ref only when needed during
>>>>>>> HDMI detect
>>>>>>> drm/i915/skl: enable PC9/10 power states during suspend-to-
>>>>>>> idle
>>>>>>> drm/i915/skl: re-enable power well support
>>>>>>> drm/i915/bxt: backlight clock gating workaround
>>>>>>> drm/i915: vlv: clamp minimum RPS frequency to what Punit
>>>>>>> allows
>>>>>>> drm/i915: clarify comment about mandatory RPM put/get during
>>>>>>> driver load/unload
>>>>>>> drm/i915: refactor RPM disabling due to RC6 being disabled
>>>>>>> drm/i915: get a permanent RPM reference on platforms w/o RPM
>>>>>>> support
>>>>>>> drm/i915: remove HAS_RUNTIME_PM check from RPM get/put/assert
>>>>>>> helpers
>>>>>>> drm/i915: add assert_rpm_wakelock_held helper
>>>>>>> drm/i915: use assert_rpm_wakelock_held instead of opencoding
>>>>>>> it
>>>>>>> drm/i915: add support for checking if we hold an RPM
>>>>>>> reference
>>>>>>> drm/i915: check that we hold an RPM wakelock ref before we
>>>>>>> put it
>>>>>>> drm/i915: add support for checking RPM atomic sections
>>>>>>> drm/i915: check that we are in an RPM atomic section in GGTT
>>>>>>> PTE updaters
>>>>>>> drm/i915: don't enable autosuspend on platforms without RPM
>>>>>>> support
>>>>>>> drm/i915: Add helper to get a display power ref if it was
>>>>>>> already enabled
>>>>>>> drm/i915: Ensure the HW is powered during display pipe HW
>>>>>>> readout
>>>>>>> drm/i915/ibx: Ensure the HW is powered during PLL HW readout
>>>>>>> drm/i915: Ensure the HW is powered when disabling VGA
>>>>>>> drm/i915: Ensure the HW is powered during HW access in
>>>>>>> assert_pipe
>>>>>>> drm/i915/crt: Ensure the HW is powered during HW state
>>>>>>> readout
>>>>>>> drm/i915/ddi: Ensure the HW is powered during HW state
>>>>>>> readout
>>>>>>> drm/i915: Ensure the HW is powered when accessing the CRC HW
>>>>>>> block
>>>>>>> drm/i915/dp: Ensure the HW is powered during HW state readout
>>>>>>> drm/i915/dsi: Ensure the HW is powered during HW state
>>>>>>> readout
>>>>>>> drm/i915/hdmi: Ensure the HW is powered during HW state
>>>>>>> readout
>>>>>>> drm/i915/lvds: Ensure the HW is powered during HW state
>>>>>>> readout
>>>>>>> drm/i915/skl: Ensure HW is powered during DDB HW state
>>>>>>> readout
>>>>>>> drm/i915/skl: Fix power domain suspend sequence
>>>>>>> drm/i915/bxt: Suspend power domains during suspend-to-idle
>>>>>>>
>>>>>>> Ioan-Adrian Ratiu (1):
>>>>>>> drm/i915/dma: enforce pr_<loglevel> consistency
>>>>>>>
>>>>>>> Jani Nikula (37):
>>>>>>> drm/i915: remove parens around revision ids
>>>>>>> drm/i915/bxt: add revision id for A1 stepping and use it
>>>>>>> drm/i915: add helpers for platform specific revision id range
>>>>>>> checks
>>>>>>> drm/i915: remove an extra level of indirection in PCI ID list
>>>>>>> drm/i915: fix indentation on skl stepping info
>>>>>>> drm/i915: constify bxt stepping info
>>>>>>> drm/i915: refactor stepping info retrieval
>>>>>>> drm/i915: remove duplicate definition of
>>>>>>> for_each_power_domain
>>>>>>> drm: fix potential dangling else problems in for_each_ macros
>>>>>>> drm/i915: fix potential dangling else problems in for_each_
>>>>>>> macros
>>>>>>> drm/i915: fix the SDE irq dmesg warnings properly
>>>>>>> drm/i915/dsi: merge pre_pll_enable hook to pre_enable
>>>>>>> drm/i915: remove pre_pll_enable hook from DDI/gen9+ crtc
>>>>>>> enable
>>>>>>> drm/i915: add has_dsi_encoder to crtc state
>>>>>>> drm/i915/bxt: add support for setting backlight freq from vbt
>>>>>>> drm/i915: use default 200 Hz backlight frequency
>>>>>>> drm/i915: simplify gmbus xfer error checks
>>>>>>> drm/i915: abstract i2c bit banging fallback in gmbus xfer
>>>>>>> drm/i915: move "no VBT in opregion" quirk to
>>>>>>> intel_opregion_setup()
>>>>>>> drm/i915/bios: have functions return vbt, not bdb, header
>>>>>>> pointer
>>>>>>> drm/i915/bios: move debug logging about VBT source to
>>>>>>> intel_parse_bios()
>>>>>>> drm/i915/bios: rename intel_parse_bios to intel_bios_init
>>>>>>> drm/i915: refactor VBT validation
>>>>>>> drm/i915/opregion: make VBT size limit more strict
>>>>>>> drm/i915/opregion: make VBT pointer a const
>>>>>>> drm/i915: don't use a temp buffer for opregion debugfs file
>>>>>>> drm/i915/debugfs: add a separate debugfs file for VBT
>>>>>>> drm/i915: prefer for_each_intel_* macros for iteration
>>>>>>> drm/i915: move drmP.h include to i915_drv.h
>>>>>>> drm/i915/bios: fix format string of the VBT signature logging
>>>>>>> drm/i915/bios: prefer using dev_priv over dev pointer
>>>>>>> drm/i915/bios: reduce indent in parse_general_features
>>>>>>> drm/i915/opregion: handle VBT sizes bigger than 6 KB
>>>>>>> drm/i915/backlight: prefer dev_priv over dev pointer
>>>>>>> drm/i915/dsi: skip gpio element execution when not supported
>>>>>>> drm/i915/dp: abstract training pattern selection
>>>>>>> drm/i915/dp: reduce missing TPS3 support errors to debug
>>>>>>> logging
>>>>>>>
>>>>>>> Jayachandran B (4):
>>>>>>> ALSA: hdac: Increase timeout value for link power check
>>>>>>> ASoC: Intel: Skylake: fix reset controller sequencing
>>>>>>> ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core
>>>>>>> [REVERTME] mfd: arizona: Set pdata and supplies for Intel
>>>>>>> WM8998/8281 AoBs
>>>>>>>
>>>>>>> Jeeja KP (70):
>>>>>>> ASoC: Intel: Skylake: Fix to correct check for non DSP widget
>>>>>>> ASoC: Intel: Skylake: Fix not to ignore return value in be
>>>>>>> hw_params
>>>>>>> ASoC: Intel: Skylake: Fix to add 32 bit in update FE params
>>>>>>> ASoC: Intel: Skylake: Fix to ignore codec_mask check in probe
>>>>>>> ASoC: Intel: Skylake: Fix to ignore blob check if link type
>>>>>>> is HDA
>>>>>>> ASoC: Intel: Skylake: Fix bit depth when querying the NHLT
>>>>>>> blob
>>>>>>> ASoC: Intel: Skylake: Add support for virtual dsp widgets
>>>>>>> ASoC: Intel: Skylake: Fix DSP pipe underrun/overrun issue
>>>>>>> ASoC: Intel: Skylake: Fix to remove be copier widget power
>>>>>>> check
>>>>>>> ASoC: Intel: Skylake: Ignore rate check for DMIC link
>>>>>>> ASoC: Intel: Skylake: Fix to remove channel_map calculation
>>>>>>> ASoC: Intel: Skylake: Fix PM behaviour
>>>>>>> ASoC: Intel: Skylake: Fix the SSP0 Fmt fixup to 24 bit
>>>>>>> ASoC: Intel: Skylake: Add support for SSP1 BE cpu dai
>>>>>>> ASoC: Intel: Skylake: remove pm_runtime_get/put calls
>>>>>>> ASoC: Intel: Skylake: Don't enable WAKEENABLE on suspend
>>>>>>> ASoC: Intel: Skylake: Remove redundant init in resume
>>>>>>> ASoC: Intel: Skylake: Fix cleanup of dma buffer
>>>>>>> ASoC: Intel: Skylake: Reset the DSP when set D3 fails
>>>>>>> ASoC: Intel: Skylake: Fix CLDMA buffer wrap case
>>>>>>> ASoC: Intel: Skylake: Fix null ptr dereferenced in
>>>>>>> skl_tplg_bind_sinks
>>>>>>> ASoC: Intel: Skylake: Add pm ops for skl_rt286 machine
>>>>>>> ASoC: Intel: Skylake: Reconfigure HDA stream register in
>>>>>>> prepare/resume
>>>>>>> ASoC: Intel: Skylake: Fix to update bit depth for module
>>>>>>> params
>>>>>>> ASoC: Intel: Skylake: Update pcm capability
>>>>>>> ASoC: Intel: Skylake: Poll CLDMA RUN bit when set
>>>>>>> ASoC: Intel: Skylake: Update DMIC DAIs and capabilities
>>>>>>> ASoC: Intel: Skylake: Add helper routines to handle module
>>>>>>> params
>>>>>>> ASoC: Intel: Skylake: Add helper routine to handle Algo
>>>>>>> parameter
>>>>>>> ASoC: Intel: Skylake: Add support to configure module params
>>>>>>> ASoC: Intel: Skylake: Add tlv byte kcontrols
>>>>>>> ASoC: Intel: Skylake: Add memory pages to widget data.
>>>>>>> ASoC: Intel: Skylake: Fix module init data correctly
>>>>>>> ASoC: Intel: Skylake: Add dai link for DMIC capture
>>>>>>> ASoC: Intel: Skylake: Add support for active suspend
>>>>>>> ASoC: Intel: Skylake: Clear stream registers before stream
>>>>>>> setup
>>>>>>> ASoC: Intel: Skylake: Fix to set pipe state to invalid when
>>>>>>> deleting
>>>>>>> ALSA: hdac: couple the hda DMA stream in cleanup
>>>>>>> ASoC: Intel: Skylake: enable interrupt as wake source in
>>>>>>> active suspend
>>>>>>> ASoC: Intel: Skylake: Add DMA resume position in Trigger
>>>>>>> resume/suspend
>>>>>>> ASoC: Intel: Skylake: Reconfigure Link stream on
>>>>>>> suspend/resume
>>>>>>> ASoC: Intel: Skylake: Add Resume capability in PCM info.
>>>>>>> ASoC: Intel: Skylake: Fix return of skl_get_queue_index
>>>>>>> ASoC: Intel: Skylake: Fix the module state check condition
>>>>>>> ASoC: Intel: Skylake: Fix not to stop sink pipe in pga pmd
>>>>>>> event
>>>>>>> ASoC: Intel: Skylake: Fix bind of source with multiple sinks
>>>>>>> ASoC: Intel: Skylake: Add missing PRE/POST_PMU handlers for
>>>>>>> vmixer
>>>>>>> ASoC: Intel: Skylake: Fix stereo DMIC record
>>>>>>> ASoC: Intel: Skylake: Allow module parameter set after bind
>>>>>>> ASoC: Intel: Skylake: Add shutdown callback
>>>>>>> ASoC: Intel: Skylake: Fill BE blob with default params
>>>>>>> ASoC: Intel: Skylake: Fix memory leak in nhlt init
>>>>>>> ASoC: Intel: boards: Enable HDMI and DP on skl_rt286 machine
>>>>>>> ASoC: Intel: boards: Enable HDMI and DP on nau88l2 machine
>>>>>>> ASoC: Intel: boards: Remove WoV sink in skl_rt286
>>>>>>> ASoC: Intel: boards: Remove WoV sink in nau88125_ssm4567
>>>>>>> machine
>>>>>>> ASoC: Intel: boards: Remove WoV sink in nau88125_max98357a
>>>>>>> machine
>>>>>>> ASoC: Intel: Skylake: correct direction in blob query
>>>>>>> ASoC: Intel: Skylake: Add IVI feedback path in
>>>>>>> nau88125_ssm4567 machine
>>>>>>> ASoC: Intel: Skylake: remove IVI codec loop in
>>>>>>> skl_nau88l25_ssm4567 machine
>>>>>>> ASoC: Intel: add dmabuffer to common sst_dsp
>>>>>>> ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops
>>>>>>> ASoC: Intel: Skylake: Fix for unloading module only when it
>>>>>>> is loaded
>>>>>>> ASoC: Intel: Skylake: Fix DSP resource de-allocation
>>>>>>> ASoC: Intel: Skylake: Suspend PCMs when marked as active
>>>>>>> suspend
>>>>>>> ASoC: Intel: Skylake: Fix support for multiple pins in a
>>>>>>> module
>>>>>>> ALSA: hda: fix to wait for RIRB & CORB DMA to set
>>>>>>> ASoC: topology: Fix memory leak in widget creation
>>>>>>> ASoC: Intel: Boards: remove ignore_suspend for WoV streams
>>>>>>> ASoC: Intel: Bxtn: Add Broxton DSP support
>>>>>>>
>>>>>>> Jie Yang (1):
>>>>>>> ASoC: Intel: sst: only select sst-firmware when DW DMAC is
>>>>>>> built-in
>>>>>>>
>>>>>>> Joonas Lahtinen (1):
>>>>>>> drm/i915: Cancel hangcheck before GPU is suspended
>>>>>>>
>>>>>>> Julia Lawall (3):
>>>>>>> ASoC: Intel: constify sst_block_ops structures
>>>>>>> drm/i915: constify intel_dvo_dev_ops structures
>>>>>>> drm/dp/mst: constify drm_dp_mst_topology_cbs structures
>>>>>>>
>>>>>>> Kumar, Mahesh (1):
>>>>>>> drm/i915/skl: Correct other-pipe watermark update condition
>>>>>>> check (v2)
>>>>>>>
>>>>>>> Liam Girdwood (1):
>>>>>>> ASoC: Intel: sst: fix the IRQ locked issue
>>>>>>>
>>>>>>> Libin Yang (11):
>>>>>>> ALSA: hda - add codec support for Kabylake display audio
>>>>>>> codec
>>>>>>> ALSA: hda - hdmi begin to support dynamic PCM assignment
>>>>>>> ALSA: hda - hdmi playback without monitor in dynamic pcm bind
>>>>>>> mode
>>>>>>> ALSA: hda - hdmi operate spdif based on pcm
>>>>>>> ALSA: hda - hdmi dynamically bind PCM to pin when monitor
>>>>>>> hotplug
>>>>>>> ALSA: hda - hdmi setup pin when monitor hotplug in pcm
>>>>>>> dynamic assignment mode
>>>>>>> ALSA: hda - add hdmi_pcm to manage hdmi pcm related features
>>>>>>> dp/mst: add SDP stream support
>>>>>>> drm/i915: start adding dp mst audio
>>>>>>> ALSA: hda - build chmap kctl based on pcm in hdmi audio
>>>>>>> ALSA: hda - hdmi jack created based on pcm
>>>>>>>
>>>>>>> Linus Walleij (2):
>>>>>>> pinctrl: intel: use gpiochip data pointer
>>>>>>> gpio: add a data pointer to gpio_chip
>>>>>>>
>>>>>>> Lukas Wunner (7):
>>>>>>> drm/i915: On fb alloc failure, unref gem object where it gets
>>>>>>> refed
>>>>>>> drm/i915: Fix double unref in intelfb_alloc failure path
>>>>>>> drm/i915: Clean up LVDS register handling harder
>>>>>>> drm/i915: Fix oops caused by fbdev initialization failure
>>>>>>> drm/i915: Tear down fbdev if initialization fails
>>>>>>> drm: Remove unused fbdev_list members
>>>>>>> ASoC: Intel: Use acpi_dev_present()
>>>>>>>
>>>>>>> Lyude (1):
>>>>>>> drm/i915/skl: Fix typo in DPLL_CFGCR1 definition
>>>>>>>
>>>>>>> Maarten Lankhorst (19):
>>>>>>> drm/atomic: add connector mask to drm_crtc_state.
>>>>>>> drm/i915: Make plane fb tracking work correctly, v2.
>>>>>>> drm/i915: Make prepare_plane_fb fully interruptible.
>>>>>>> drm/i915: Update legacy primary state outside the commit
>>>>>>> hook, v2.
>>>>>>> drm/i915: Only commit active planes when updating planes
>>>>>>> during reset.
>>>>>>> drm/i915: Only run commit when crtc is active, v2.
>>>>>>> drm/i915: Only call commit_planes when there are things to
>>>>>>> commit.
>>>>>>> drm/i915: Do not wait for flips in
>>>>>>> intel_crtc_disable_noatomic.
>>>>>>> drm/i915: Make wait_for_flips interruptible.
>>>>>>> drm/i915: Change locking for struct_mutex, v3.
>>>>>>> drm/i915: Wait for object idle without locks in
>>>>>>> atomic_commit, v2.
>>>>>>> drm/i915: Handle cdclk limits on broadwell.
>>>>>>> drm/i915: Move disable_cxsr to the crtc_state.
>>>>>>> drm/i915: Calculate watermark related members in the
>>>>>>> crtc_state, v4.
>>>>>>> drm/i915/skl: Update watermarks before the crtc is disabled.
>>>>>>> drm/i915: Remove double wait_for_vblank on broadwell.
>>>>>>> drm/i915: Set connector_state->connector using the helper.
>>>>>>> drm/i915: Update connector_mask during readout, v2.
>>>>>>> drm/i915: Widen return value for
>>>>>>> reservation_object_wait_timeout_rcu to long.
>>>>>>>
>>>>>>> Matt Ranostay (12):
>>>>>>> ASoC: Intel: Skylake: use module_pin info for unbind
>>>>>>> ASoC: Intel: Skylake: Add i915 enabling in skl probe
>>>>>>> ASoC: intel: skylake: Add DSP lookup for BXT-M
>>>>>>> [UPSTREAM] ASoC: skylake: Add BXT-M machine file checks
>>>>>>> [UPSTREAM] ASoC: bxt_florida: update to
>>>>>>> module_platform_driver()
>>>>>>> [REVERTME] ASoC: intel: sst-match-acpi: Add missing merge
>>>>>>> commit changes
>>>>>>> [UPSTREAM] sound: pci: hda: add missing BXT-M reference
>>>>>>> [REVERTME] mmc: host: pci: disable functionality to help
>>>>>>> enumeration
>>>>>>> [REVERTME] ASoC: Flush firmware from cache
>>>>>>> [UPSTREAM] ASoC: bxt_florida: switch to device resources
>>>>>>> [REVERTME] mfd: arizona-i2c: make driver probe with subsystem
>>>>>>> [UPSTREAM] ASoC: skylake: added WARN_ON invalid dsp
>>>>>>>
>>>>>>> Matt Roper (13):
>>>>>>> drm/i915/skl: Eliminate usage of pipe_wm_parameters from SKL-
>>>>>>> style WM (v4)
>>>>>>> drm/i915/ivb: Move WaCxSRDisabledForSpriteScaling w/a to
>>>>>>> atomic check
>>>>>>> drm/i915: Drop intel_update_sprite_watermarks
>>>>>>> drm/i915: Calculate pipe watermarks into CRTC state (v3)
>>>>>>> drm/i915: Calculate ILK-style watermarks during atomic check
>>>>>>> (v3)
>>>>>>> drm/i915: Don't set plane visible during HW readout if CRTC
>>>>>>> is off
>>>>>>> drm/i915: Calculate watermark configuration during atomic
>>>>>>> check (v2)
>>>>>>> drm/i915/bxt: Fix eDP panel fitting (v2)
>>>>>>> drm/i915/bxt: Force port A DDI to use 4 lanes
>>>>>>> drm/i915/bxt: Disable power well support
>>>>>>> drm/i915/bxt: Don't save/restore eDP panel power during
>>>>>>> suspend (v3)
>>>>>>> drm/i915: Pretend cursor is always on for ILK-style WM
>>>>>>> calculations (v2)
>>>>>>> drm/i915/bxt: Set max cdclk frequency properly
>>>>>>>
>>>>>>> Mengdong Lin (11):
>>>>>>> ASoC: topology: ABI - Rename dai_elems to pcm_elems in
>>>>>>> manifest
>>>>>>> ASoC: Change the PCM runtime array to a list
>>>>>>> ASoC: Define soc_init_dai_link() to wrap link intialization.
>>>>>>> ASoC: Change 2nd argument of soc_bind_dai_link() to DAI link
>>>>>>> pointer
>>>>>>> ASoC: Implement DAI links in a list & define API to
>>>>>>> add/remove a link
>>>>>>> ASoC: Define add/remove_dai_link ops for a soc card
>>>>>>> ASoC: soc_bind_dai_link() directly returns success for a
>>>>>>> bound DAI link
>>>>>>> ASoC: Bind new DAI links after probing components
>>>>>>> ASoC: Define soc_add_dai() to add a DAI to a component
>>>>>>> ASoC: Support registering a DAI dynamically
>>>>>>> ASoC: Make aux_dev more like a generic component
>>>>>>>
>>>>>>> MichaÅ' Winiarski (1):
>>>>>>> drm/i915: Avoid writing relocs with addresses in non-
>>>>>>> canonical form
>>>>>>>
>>>>>>> Michel Thierry (2):
>>>>>>> drm/i915/gen8: Flip the 48b switch
>>>>>>> drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page
>>>>>>>
>>>>>>> Mika Kuoppala (8):
>>>>>>> drm/i915/skl: Refuse to load outdated dmc firmware
>>>>>>> drm/i915/bxt: Expose DC5 entry count
>>>>>>> drm/i915: Add csr programming registers to dmc debugfs entry
>>>>>>> drm/i915: Add dmc firmware load state and version to error
>>>>>>> state
>>>>>>> drm/i915: Avoid pointer arithmetic in calculating plane
>>>>>>> surface offset
>>>>>>> drm/i915/skl: Add SKL GT4 PCI IDs
>>>>>>> drm/i915/skl: Default to noncoherent access up to F0
>>>>>>> drm/i915/gen9: Verify and enforce dc6 state writes
>>>>>>>
>>>>>>> Mika Westerberg (5):
>>>>>>> i2c: designware: Convert to use unified device property API
>>>>>>> PCI: Move PCIe ports to D3 during suspend
>>>>>>> PCI: No need to set d3cold_allowed to PCIe ports
>>>>>>> ACPI / hotplug / PCI: Runtime resume bridge before rescan
>>>>>>> PCI: Add runtime PM support for PCIe ports
>>>>>>>
>>>>>>> Mousami Jana (1):
>>>>>>> ASoC: Intel: Skylake: add LARGE_CONFIG_GET IPC support
>>>>>>>
>>>>>>> Mousumi Jana (1):
>>>>>>> ASoC: Intel: Skylake: Fix memory leak during init instance
>>>>>>>
>>>>>>> Mythri P K (1):
>>>>>>> ASoC: core: Pass kcontrol to bytes tlv callbacks
>>>>>>>
>>>>>>> Namrta Salonie (2):
>>>>>>> drm/i915 : Fix to remove unnecsessary checks in postclose
>>>>>>> function.
>>>>>>> drm/i915: Fix possible null dereference in framebuffer_info
>>>>>>> debugfs function
>>>>>>>
>>>>>>> Nick Hoath (3):
>>>>>>> drm/i195: Rename gt_irq_handler variable
>>>>>>> drm/i915: Break out common code from gen8_gt_irq_handler
>>>>>>> drm/i915: Extend LRC pinning to cover GPU context writeback
>>>>>>>
>>>>>>> Omair M Abdullah (2):
>>>>>>> ASoC: Intel: Skylake: update mailbox uplink window offset and
>>>>>>> size
>>>>>>> ASoC: Intel: Skylake: read params from DSP if module is on
>>>>>>>
>>>>>>> Pardha Saradhi K (1):
>>>>>>> ASoC: Intel: Skylake: Add SSP DAIs
>>>>>>>
>>>>>>> Patrik Jakobsson (10):
>>>>>>> drm/i915: Don't trust CSR program memory contents
>>>>>>> drm/i915/gen9: Always set mask memory up when enabling DC5 or
>>>>>>> DC6
>>>>>>> drm/i915: Remove distinction between DDI 2 vs 4 lanes
>>>>>>> drm/i915: Add a modeset power domain
>>>>>>> drm/i915: Do not warn on PG2 enabled in gen9_disable_dc5()
>>>>>>> drm/i915: Explain usage of power well IDs vs bit groups
>>>>>>> drm/i915/gen9: Turn DC handling into a power well
>>>>>>> drm/i915/gen9: Add boot parameter for disabling DC6
>>>>>>> drm/i915/skl: Remove unused suspend and resume callbacks
>>>>>>> drm/i915/gen9: Check for DC state mismatch
>>>>>>>
>>>>>>> Paulo Zanoni (24):
>>>>>>> drm/i915: change no_fbc_reason from enum to string
>>>>>>> drm/i915: remove newline from a no_fbc_reason message
>>>>>>> drm/i915: rename intel_fbc_nuke to intel_fbc_recompress
>>>>>>> drm/i915: extract fbc_on_pipe_a_only()
>>>>>>> drm/i915: remove unnecessary check for crtc->primary->fb
>>>>>>> drm/i915: extract crtc_is_valid() on the FBC code
>>>>>>> drm/i915: use struct intel_crtc *crtc at __intel_fbc_update()
>>>>>>> drm/i915: fix the __intel_fbc_update() comments
>>>>>>> drm/i915: don't disable_fbc() if FBC is already disabled
>>>>>>> drm/i915: refactor FBC deactivation at init
>>>>>>> drm/i915: remove too-frequent FBC debug message
>>>>>>> drm/i915: clarify that checking the FB stride for CFB is
>>>>>>> intentional
>>>>>>> drm/i915: remove in_dbg_master check from intel_fbc.c
>>>>>>> drm/i915: fix the CFB size check
>>>>>>> drm/i915: set dev_priv->fbc.crtc before scheduling the enable
>>>>>>> work
>>>>>>> drm/i915: pass the crtc as an argument to intel_fbc_update()
>>>>>>> drm/i915: introduce is_active/activate/deactivate to the FBC
>>>>>>> terminology
>>>>>>> drm/i915: introduce intel_fbc_{enable,disable}
>>>>>>> drm/i915: alloc/free the FBC CFB during enable/disable
>>>>>>> drm/i915: check for FBC planes in the same place as the pipes
>>>>>>> drm/i915: use a single intel_fbc_work struct
>>>>>>> drm/i915: kill fbc.uncompressed_size
>>>>>>> drm/i915: get rid of FBC {,de}activation messages
>>>>>>> drm/i915: only recompress FBC after flushing a drawing
>>>>>>> operation
>>>>>>>
>>>>>>> Pierre-Louis Bossart (6):
>>>>>>> ASoC: Intel: tag byt-rt5640 machine driver as deprecated
>>>>>>> ASoC: Intel: add bytct-rt5651 machine driver
>>>>>>> ASoC: Intel: Load the atom DPCM driver only
>>>>>>> ASoc: Intel: Atom: add deep buffer definitions for atom
>>>>>>> platforms
>>>>>>> ASoC: Intel: common: filter ACPI devices with _STA return
>>>>>>> value
>>>>>>> ASoC: Intel: common: add translation from HID to codec-name
>>>>>>>
>>>>>>> Praveen Diwakar (1):
>>>>>>> ASoC: Intel: Skylake: Update ignore suspend for rt286 machine
>>>>>>>
>>>>>>> Qi Zheng (1):
>>>>>>> pinctrl: intel: implement gpio_irq_enable
>>>>>>>
>>>>>>> Ramesh Babu (2):
>>>>>>> ASoC: Intel: Add Broxton-P machine driver
>>>>>>> [REVERTME] mfd: arizona: Intel modification for arizona mfd
>>>>>>> file
>>>>>>>
>>>>>>> Robert Fekete (1):
>>>>>>> drm/i915: Add extra plane information in debugfs.
>>>>>>>
>>>>>>> Rodrigo Vivi (21):
>>>>>>> drm/i915: Define IS_BROXTON properly.
>>>>>>> drm/i915/kbl: Introduce Kabylake platform defition.
>>>>>>> drm/i915: Allow 1 vblank to let Sink CRC calculation to start
>>>>>>> or stop.
>>>>>>> drm/i915: Make Sink crc calculation waiting for counter to
>>>>>>> reset.
>>>>>>> drm/i915: Stop tracking last calculated Sink CRC.
>>>>>>> drm/i915: Rely on TEST_SINK_START instead of tracking Sink
>>>>>>> CRC state on dev_priv.
>>>>>>> drm/i915: Delay first PSR activation.
>>>>>>> drm/i915: Reduce PSR re-activation time for VLV/CHV.
>>>>>>> drm/i915: PSR: Don't Skip aux handshake on
>>>>>>> DP_PSR_NO_TRAIN_ON_EXIT.
>>>>>>> drm/i915: Send TP1 TP2/3 even when panel claims no
>>>>>>> NO_TRAIN_ON_EXIT.
>>>>>>> drm/i915: Remove duplicated dpcd write on
>>>>>>> hsw_psr_enable_sink.
>>>>>>> drm/i915: PSR: Let's rely more on frontbuffer tracking.
>>>>>>> drm/i915: PSR: Mask LPSP hw tracking back again.
>>>>>>> drm/i915: Remove PSR Perf Counter for SKL+
>>>>>>> drm/i915: Also disable PSR on Sink when disabling it on
>>>>>>> Source.
>>>>>>> drm/i915: Fix idle_frames counter.
>>>>>>> drm/i915/kbl: Use propper ddi buffer translation table for
>>>>>>> Kabylake ULT and ULX.
>>>>>>> drm/i915/kbl: drm/i915: Avoid GuC loading for now on
>>>>>>> Kabylake.
>>>>>>> drm/i915/kbl: Fix DMC load on Kabylake.
>>>>>>> drm/i915: Fix random aux transactions failures.
>>>>>>> drm/i915: PSR also doesn't have link_entry_time on SKL.
>>>>>>>
>>>>>>> Rohit Ainapure (2):
>>>>>>> ASoC: Intel: Add Nuvoton+Maxim machine driver entry
>>>>>>> ASoC: Intel: Skylake: Add Nuvoton Maxim machine driver
>>>>>>>
>>>>>>> Sathya Prakash M R (1):
>>>>>>> ASoC: Intel: boards: Add IV feedback route for
>>>>>>> nau88l25_ssm4567 machine
>>>>>>>
>>>>>>> Sathyanarayana Nujella (2):
>>>>>>> ASoc: Intel: boards: Add WOV as sink for nau88l25_ssm4567
>>>>>>> machine
>>>>>>> ASoC: Intel: boards: Enable HDMI and DP on SKL
>>>>>>> nau88l25_max98357 machine
>>>>>>>
>>>>>>> Senthilnathan Veppur (1):
>>>>>>> ASoC: Intel: Bxtn: Add Broxton PCI ID
>>>>>>>
>>>>>>> Shobhit Kumar (2):
>>>>>>> drm/i915/skl: If needed sanitize bios programmed cdclk
>>>>>>> drm/i915/skl: While sanitizing cdclock check the SWF18 as
>>>>>>> well
>>>>>>>
>>>>>>> Shubhangi Shrivastava (2):
>>>>>>> drm/i915: Cleanup test data during long/short hotplug
>>>>>>> drm/i915: force link training when requested by Sink
>>>>>>>
>>>>>>> Steve Sakoman (1):
>>>>>>> [REVERTME] hack to enable spidev since bios doesn't
>>>>>>>
>>>>>>> Subhransu S. Prusty (22):
>>>>>>> ASoC: Intel: Skylake: Fix to cleanup if skl_sst_dsp_init
>>>>>>> fails
>>>>>>> ASoC: Intel: Skylake: Fix possible memory corruption in codec
>>>>>>> dai dma params
>>>>>>> ASoC: Intel: Skylake: Fix to turn OFF codec power when
>>>>>>> entering S3
>>>>>>> ASoC: Intel: Skylake: Add HDMI FE and BE cpu dais
>>>>>>> ASoC: Intel: Skylake: Fix ibs/obs calc for non-integral
>>>>>>> sampling rates
>>>>>>> ASoC: Intel: Skylake: Add multichannel support for HDMI
>>>>>>> ASoC: Intel: Skylake: Update channel map based on runtime
>>>>>>> params
>>>>>>> ALSA: hda - Create common chmap object
>>>>>>> ALSA: hda - Register chmap obj as priv data instead of codec
>>>>>>> ALSA: hda - Use hdac name space for CEA spk alloc structure
>>>>>>> ALSA: hda - Add hdmi chmap verb programming ops to chmap
>>>>>>> object
>>>>>>> ALSA: hda - chmap helper args modified to use generic hdac
>>>>>>> objs.
>>>>>>> ALSA: hda - Move chmap support helpers/ops to core
>>>>>>> ALSA: hda - Use snd_hdac namespace prefix for chmap exported
>>>>>>> APIs
>>>>>>> ALSA: hda - add helper to get channels from cap bits
>>>>>>> ASoC: hdac_hdmi: parse eld for channel map capability
>>>>>>> ASoC: hdac_hdmi: Add multichannel support
>>>>>>> ASoC: skl_rt286: Fix to support hdmi channel map support
>>>>>>> ASoC: Intel: boards: Update skl_nau88l25_max98357a driver to
>>>>>>> support chmap
>>>>>>> ASoC: Intel: boards: Update skl_nau88l25_ssm4567 driver to
>>>>>>> support chmap
>>>>>>> ASoC: hdac_hdmi: Register chmap controls and ops
>>>>>>> ALSA: hda - Update chmap tlv to report sink's capability
>>>>>>>
>>>>>>> Sudip Mukherjee (3):
>>>>>>> ASoC: Intel: Skylake: Fix memory leak
>>>>>>> ASoC: fix memory leak
>>>>>>> drm/i915: check for return value
>>>>>>>
>>>>>>> Takashi Iwai (25):
>>>>>>> ALSA: hda - Skip ELD notification during PM process
>>>>>>> ALSA: hda - Do zero-clear in snd_hdmi_parse_eld() itself
>>>>>>> ALSA: hda - Split ELD update code from hdmi_present_sense()
>>>>>>> ALSA: hda - Optimize audio component check in patch_hdmi.c
>>>>>>> ALSA: hda - Fix superfluous HDMI jack repoll
>>>>>>> ALSA: hda - Use component ops for i915 HDMI/DP audio jack
>>>>>>> handling
>>>>>>> ALSA: hda - Degrade i915 binding failure message
>>>>>>> ALSA: hda - Move audio component accesses to hdac_i915.c
>>>>>>> ALSA: hda - Add a sanity check of pin / port mapping on i915
>>>>>>> HDMI/DP
>>>>>>> ALSA: hda - Clear the leftover component assignment at
>>>>>>> snd_hdac_i915_exit()
>>>>>>> ALSA: hda - Fix yet another i915 pointer leftover in error
>>>>>>> path
>>>>>>> ALSA: hda - Bind with i915 only when Intel graphics is
>>>>>>> present
>>>>>>> drm/i915: Add get_eld audio component
>>>>>>> drm/i915: Add reverse mapping between port and intel_encoder
>>>>>>> drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
>>>>>>> ALSA: hda - Clean up the code to check bdl_pos_adj option
>>>>>>> ALSA: hda - Merge RIRB_PRE_DELAY into CTX_WORKAROUND caps
>>>>>>> ALSA: hda - Raise AZX_DCAPS_RIRB_DELAY handling into top
>>>>>>> drivers
>>>>>>> ALSA: hda - Loop interrupt handling until really cleared
>>>>>>> ALSA: hda - Fix missing ELD update at unplugging
>>>>>>> ALSA: hda - Fix spurious kernel WARNING on Baytrail HDMI
>>>>>>> ALSA: hda - Limit i915 HDMI binding only for HSW and later
>>>>>>> ALSA: hda - Really restrict i915 notifier to HSW+
>>>>>>> ALSA: hda - Workaround for unbalanced i915 power refcount by
>>>>>>> concurrent probe
>>>>>>> ALSA: hda - Split out Intel-specific codes from
>>>>>>> patch_generic_hdmi()
>>>>>>>
>>>>>>> Tim Gore (2):
>>>>>>> drm/i915: make A0 wa's applied to A1
>>>>>>> drm/i915: implement WaClearTdlStateAckDirtyBits
>>>>>>>
>>>>>>> Tomas Elf (3):
>>>>>>> drm/i915: Grab execlist spinlock to avoid post-reset
>>>>>>> concurrency issues.
>>>>>>> drm/i915: Cope with request list state change during error
>>>>>>> state capture
>>>>>>> drm/i915: Update to post-reset execlist queue clean-up
>>>>>>>
>>>>>>> Tvrtko Ursulin (4):
>>>>>>> drm/i915/skl: Assume no scaling is available when things are
>>>>>>> not as expected
>>>>>>> drm/i915/skl: Consider plane rotation when calculating stride
>>>>>>> in skl_do_mmio_flip
>>>>>>> drm/i915: Fix failure paths around initial fbdev allocation
>>>>>>> drm/i915: Remove redundant check in i915_gem_obj_to_vma
>>>>>>>
>>>>>>> Ville Syrjälä (92):
>>>>>>> pci: Decouple quirks.c from i915_reg.h
>>>>>>> drm: Add crtc->name and use it in debug messages
>>>>>>> drm: Add plane->name and use it in debug prints
>>>>>>> drm/i915: Refactor ilk_update_wm (v3)
>>>>>>> drm/i915: Turn __raw_i915_read8() & co. in to inline
>>>>>>> functions
>>>>>>> drm/i915: Read FORCEWAKE registers with I915_READ_FW()
>>>>>>> drm/i915: Minor style nits in intel_uncore.c
>>>>>>> drm/i915: Respin vlv/chv reagister access to look more like
>>>>>>> SKL
>>>>>>> drm/i915: Add NEEDS_FORCEWAKE() checks for vlv/chv
>>>>>>> drm/i915: Use paramtrized WRPLL_CTL()
>>>>>>> drm/i915: Print a debug message when exceeding dotclock limit
>>>>>>> on pre-gen4
>>>>>>> drm/i915: Don't use intel_pipe_to_cpu_transcoder() when
>>>>>>> there's a pipe config around
>>>>>>> drm/i915: Set sync polarity from adjusted mode for
>>>>>>> TRANS_DP_CTL
>>>>>>> drm/i915: Enable PCH FIFO underruns later on ILK/SNB/IVB
>>>>>>> drm/i915: Enable PCH FIFO underruns later on HSW+
>>>>>>> drm/i915: Re-enable PCH FIO underrun reporting after pipe has
>>>>>>> been disabled
>>>>>>> drm/i915: Check for FIFO underruns after modeset on IVB/HSW
>>>>>>> and CPT/PPT
>>>>>>> drm/i915: Check for CPT and not !IBX in
>>>>>>> ironlake_disable_pch_transcoder()
>>>>>>> drm/i915: Disable FIFO underrun reporting around IBX
>>>>>>> transcoder B workaround
>>>>>>> drm/i915: Hide underruns from eDP PLL and port enable on ILK
>>>>>>> drm/i915: s/DP_PLL_FREQ_160MHZ/DP_PLL_FREQ_162MHZ/
>>>>>>> drm/i915: Remove ILK-A eDP PLL workaround notes
>>>>>>> drm/i915: Clean up eDP PLL state asserts
>>>>>>> drm/i915: Use intel_dp->DP in eDP PLL setup
>>>>>>> drm/i915: Configure eDP PLL freq from ironlake_edp_pll_on()
>>>>>>> drm/i915: Setup DDI clk for MST on SKL
>>>>>>> drm/i915: Kill intel_runtime_pm_disable()
>>>>>>> drm/i915: Do fbdev fini first during unload
>>>>>>> drm/i915: Move the fbdev async_schedule() into intel_fbdev.c
>>>>>>> drm/i915: Replace aux_ch_ctl_reg check with port check
>>>>>>> drm/i915: Replace the aux ddc name switch statement with
>>>>>>> kasprintf()
>>>>>>> drm/i915: Parametrize AUX registers
>>>>>>> drm/i915: Remove the magic AUX_CTL is at DP + foo tricks
>>>>>>> drm/i915: Store aux data reg offsets in intel_dp-
>>>>>>>>
>>>>>>>> aux_ch_data_reg[]
>>>>>>> drm/i915: Add dev_priv->psr_mmio_base
>>>>>>> drm/i915: Model PSR AUX register selection more like the
>>>>>>> normal AUX code
>>>>>>> drm/i915: Remove DDI power domain exclusion
>>>>>>> SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS
>>>>>>> drm/i915: s/PCH_DP_/PORT_/ in intel_trans_dp_port_sel() and
>>>>>>> move it next to its only user
>>>>>>> drm/i915: s/is_sdvob/enum port/
>>>>>>> drm/i915: Store DVO SRCDIM register offset under
>>>>>>> intel_dvo_device
>>>>>>> drm/i915: Streamline gpio_mmio_base deduction
>>>>>>> drm/i915: Prefix raw register defines with underscore
>>>>>>> drm/i915: Parametrize L3 error registers
>>>>>>> drm/i915: Parametrize MOCS registers
>>>>>>> drm/i915: s/0x50/RING_PSMI_CTL/
>>>>>>> drm/i915: Make the high dword offset more explicit in
>>>>>>> i915_reg_read_ioctl
>>>>>>> drm/i915: Make the cmd parser 64bit regs explicit
>>>>>>> drm/i915: Add functions to emit register offsets to the ring
>>>>>>> drm/i915: Add wa_ctx_emit_reg()
>>>>>>> drm/i915: Wrap ASSIGN_CTX_{PDP,PM4L} in do {} while(0)
>>>>>>> drm/i915: Give names to more ring registers
>>>>>>> drm/i915: Wrap context LRI init in a macro
>>>>>>> drm/i915: Turn vgpu pdps into an array
>>>>>>> drm/i915: Pull the vgpu uncore funcs apart from the rest of
>>>>>>> gen6+
>>>>>>> drm/i915: Add 'offset' to uncore funcs
>>>>>>> drm/i915: Add missing ')' to SKL_PS_ECC_STAT define
>>>>>>> drm/i915: Type safe register read/write
>>>>>>> drm/i915: Suppress spurious CPU FIFO underruns on ILK-IVB
>>>>>>> drm/i915: Disable CPU underruns around eDP port and vdd
>>>>>>> enable on ILK-IVB
>>>>>>> drm/i915: Check for underruns after crtc disable
>>>>>>> drm/i915: Don't register CRT connector when it's fused off
>>>>>>> drm: Pass the user drm_mode_fb_cmd2 as const to .fb_create()
>>>>>>> drm: Add "prefix" parameter to drm_rect_debug_print()
>>>>>>> drm/i915: Make ibx_{enable,disable}_display_interrupt()
>>>>>>> static inlines
>>>>>>> drm/i915: Make ironlake_{enable,disable}_display_irq() static
>>>>>>> inlines
>>>>>>> drm/i915: Introduce bdw_{update,enable,disable}_pipe_irq()
>>>>>>> drm/i915: Fix kerneldoc indent fails
>>>>>>> drm/i915: Don't use crtc->config when reading out infoframe
>>>>>>> state
>>>>>>> drm/i915: Use intel_pipe_will_have_type() in
>>>>>>> ironlake_crtc_compute_clock()
>>>>>>> drm/i915: Fix VBT backlight Hz to PWM conversion for PNV
>>>>>>> drm/i915: Fix vbt PWM max setup for CTG
>>>>>>> drm/i915: Add HAS_PCH_LPT_H()
>>>>>>> drm/i915: Kill duplicated PNV .get_display_clock_speed()
>>>>>>> assignment
>>>>>>> drm/i915: Round the AUX clock divider to closest on all
>>>>>>> platforms
>>>>>>> drm/i915: Use cached cdclk_freq for PWM calculations
>>>>>>> drm/i915: Don't register the CRT connector when it's fused
>>>>>>> off on LPT-H
>>>>>>> drm/i915: Don't register CRT connector when DDI E can't be
>>>>>>> used
>>>>>>> drm/i915: Check VBT for CRT port presence on HSW/BDW
>>>>>>> drm/i915: Add "missing" break to haswell_get_ddi_pll()
>>>>>>> drm/i915: Disable CLKOUT_DP bending on LPT/WPT as needed
>>>>>>> drm/i915: Round to closest when computing the VGA dotclock
>>>>>>> for LPT-H
>>>>>>> drm/i915: Disable FDI after the CRT port on LPT-H
>>>>>>> drm/i915: Refactor LPT-H VGA dotclock disabling
>>>>>>> drm/i915: Disable LPT-H VGA dotclock during crtc disable
>>>>>>> drm/i915: Leave FDI running after failed link training on
>>>>>>> LPT-H
>>>>>>> drm: Pass 'name' to drm_crtc_init_with_planes()
>>>>>>> drm: Pass 'name' to drm_universal_plane_init()
>>>>>>> drm: Pass 'name' to drm_encoder_init()
>>>>>>> drm/i915: Fix AVI/HDMI/SPD infoframes on HSW+
>>>>>>> drm/i915: Fix NULL plane->fb oops on SKL
>>>>>>> drm/i915: Fix hpd live status bits for g4x
>>>>>>> drm/i915: Actually retry with bit-banging after GMBUS timeout
>>>>>>>
>>>>>>> Vincent Stehlé (1):
>>>>>>> ASoC: Intel: Skylake: fix typo in sizeof
>>>>>>>
>>>>>>> Vinod Koul (34):
>>>>>>> ASoC: Intel: Skylake: Fix skl machine driver creation
>>>>>>> ASoC: Intel: Skylake: Use the fw name from ACPI mach table
>>>>>>> ASoC: Intel: Skylake: Fix substream dereference before check
>>>>>>> ASoC: Intel: Skylake: Fix resource cleanup on teardown
>>>>>>> ASoC: Intel: Move apci find machine routines
>>>>>>> ASoC: Intel: Atom: move atom driver to common acpi match
>>>>>>> ASoC: Intel: add fw name to common dsp context
>>>>>>> ASoC: Intel: Skylake: Constrain the audio devices
>>>>>>> ASoC: Intel: Skylake: Update the rtd query
>>>>>>> ASoC: Intel: Skylake: Fix test of a field address
>>>>>>> ASoC: Intel: Skylake: Move up pipe mem free
>>>>>>> ASoC: Intel: Skylake: add wov as int sink
>>>>>>> ASoC: Intel: Skylake: Fix the dapm machine map
>>>>>>> ASoC: Intel: Skylake: manage link power in active suspend
>>>>>>> ASoC: Intel: Skylake: Fix the memory overwrite of tlv buffer
>>>>>>> ASoC: Intel: Skylake: Remove autosuspend delay
>>>>>>> ASoC: Intel: Create independent acpi match module
>>>>>>> ASoC: Intel: Add module tags for common match module
>>>>>>> ASoC: Intel: Skylake: Update the delay check
>>>>>>> ASoC: Intel: Skylake: Generate topology name for NHLT table
>>>>>>> header
>>>>>>> ASoC: core: mark SND_SOC_BYTES_EXT as deprecated
>>>>>>> ASoC: Intel: Skylake: free codec objects on removal
>>>>>>> ASoC: Intel: Skylake: Call i915 exit last
>>>>>>> ASoC: Intel: Skylake: remove call to pci_dev_put
>>>>>>> ASoC: Intel: Skylake: add link mangement
>>>>>>> ASoC: Intel: Skylake: Move module id defines
>>>>>>> ASoC: Intel: Skylake: Fix whitepsace issues
>>>>>>> ASoC: Intel: Skylake: Fix kbuild dependency
>>>>>>> ASoC: Intel: Skylake: Freeup properly on skl_dsp_free
>>>>>>> ASoC: dapm: add a dapm sink widget
>>>>>>> ASoC: core: refactor soc_link_dai_widgets()
>>>>>>> ALSA: hda: fix the missing ptr initialization
>>>>>>> ALSA: hdac: add link pm and ref counting
>>>>>>> ALSA: hda: use list macro for parsing on cleanup
>>>>>>>
>>>>>>> Wayne Boyer (6):
>>>>>>> drm/i915: Clean up device info structure definitions
>>>>>>> drm/i915: Separate cherryview from valleyview
>>>>>>> drm/i915: Use HAS_PCH_SPLIT to determine correct devices
>>>>>>> drm/i915: Remove VLV A0 hack
>>>>>>> drm/i915: Only set gem object L3 cache level for IVB devices
>>>>>>> drm/i915: Remove BUG_ON call in vlv_enable_pll
>>>>>>>
>>>>>>> Yong Zhi (2):
>>>>>>> ASoc: Intel: boards: update ignore suspend for
>>>>>>> nau88l25_ssm4567 machine
>>>>>>> ASoc: Intel: boards: update constraints for nau88l25_ssm4567
>>>>>>> machine
>>>>>>>
>>>>>>> Zeng Zhaoxiu (1):
>>>>>>> i915: Replace "hweight8(dev_priv->info.subslice_7eu[i]) != 1"
>>>>>>> with "!is_power_of_2(dev_priv->info.subslice_7eu[i])"
>>>>>>>
>>>>>>> jim.bride at linux.intel.com (1):
>>>>>>> drm/i915/skl: Update DDI translation tables for SKL
>>>>>>>
>>>>>>> Documentation/DocBook/gpu.tmpl | 290 +--
>>>>>>> Documentation/kernel-parameters.txt | 4 +
>>>>>>> arch/x86/include/asm/platform_sst_audio.h | 1 +
>>>>>>> drivers/gpio/gpiolib.c | 15 +-
>>>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 4 +-
>>>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 1 -
>>>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h | 2 +-
>>>>>>> drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 14 +-
>>>>>>> drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 14 +-
>>>>>>> drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 14 +-
>>>>>>> drivers/gpu/drm/armada/armada_crtc.c | 4 +-
>>>>>>> drivers/gpu/drm/armada/armada_fb.c | 4 +-
>>>>>>> drivers/gpu/drm/armada/armada_fb.h | 2 +-
>>>>>>> drivers/gpu/drm/armada/armada_overlay.c | 2 +-
>>>>>>> drivers/gpu/drm/ast/ast_drv.h | 3 +-
>>>>>>> drivers/gpu/drm/ast/ast_fb.c | 2 +-
>>>>>>> drivers/gpu/drm/ast/ast_main.c | 4 +-
>>>>>>> drivers/gpu/drm/ast/ast_mode.c | 2 +-
>>>>>>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 2 +-
>>>>>>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 2 +-
>>>>>>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_output.c | 2 +-
>>>>>>> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 +-
>>>>>>> drivers/gpu/drm/bochs/bochs.h | 2 +-
>>>>>>> drivers/gpu/drm/bochs/bochs_fbdev.c | 2 +-
>>>>>>> drivers/gpu/drm/bochs/bochs_kms.c | 2 +-
>>>>>>> drivers/gpu/drm/bochs/bochs_mm.c | 4 +-
>>>>>>> drivers/gpu/drm/cirrus/cirrus_drv.h | 3 +-
>>>>>>> drivers/gpu/drm/cirrus/cirrus_fbdev.c | 2 +-
>>>>>>> drivers/gpu/drm/cirrus/cirrus_main.c | 4 +-
>>>>>>> drivers/gpu/drm/cirrus/cirrus_mode.c | 2 +-
>>>>>>> drivers/gpu/drm/drm_atomic.c | 64 +-
>>>>>>> drivers/gpu/drm/drm_atomic_helper.c | 60 +-
>>>>>>> drivers/gpu/drm/drm_crtc.c | 81 +-
>>>>>>> drivers/gpu/drm/drm_crtc_helper.c | 26 +-
>>>>>>> drivers/gpu/drm/drm_dp_mst_topology.c | 38 +-
>>>>>>> drivers/gpu/drm/drm_fb_cma_helper.c | 4 +-
>>>>>>> drivers/gpu/drm/drm_modes.c | 15 +-
>>>>>>> drivers/gpu/drm/drm_modeset_lock.c | 14 +-
>>>>>>> drivers/gpu/drm/drm_plane_helper.c | 5 +-
>>>>>>> drivers/gpu/drm/drm_prime.c | 16 +-
>>>>>>> drivers/gpu/drm/drm_rect.c | 7 +-
>>>>>>> drivers/gpu/drm/exynos/exynos_dp_core.c | 2 +-
>>>>>>> drivers/gpu/drm/exynos/exynos_drm_crtc.c | 2 +-
>>>>>>> drivers/gpu/drm/exynos/exynos_drm_dpi.c | 2 +-
>>>>>>> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 2 +-
>>>>>>> drivers/gpu/drm/exynos/exynos_drm_fb.c | 4 +-
>>>>>>> drivers/gpu/drm/exynos/exynos_drm_fb.h | 2 +-
>>>>>>> drivers/gpu/drm/exynos/exynos_drm_plane.c | 2 +-
>>>>>>> drivers/gpu/drm/exynos/exynos_drm_vidi.c | 2 +-
>>>>>>> drivers/gpu/drm/exynos/exynos_hdmi.c | 2 +-
>>>>>>> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 2 +-
>>>>>>> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c | 2 +-
>>>>>>> drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c | 2 +-
>>>>>>> drivers/gpu/drm/gma500/cdv_intel_crt.c | 2 +-
>>>>>>> drivers/gpu/drm/gma500/cdv_intel_dp.c | 3 +-
>>>>>>> drivers/gpu/drm/gma500/cdv_intel_hdmi.c | 2 +-
>>>>>>> drivers/gpu/drm/gma500/cdv_intel_lvds.c | 2 +-
>>>>>>> drivers/gpu/drm/gma500/framebuffer.c | 6 +-
>>>>>>> drivers/gpu/drm/gma500/mdfld_dsi_dpi.c | 2 +-
>>>>>>> drivers/gpu/drm/gma500/oaktrail_hdmi.c | 2 +-
>>>>>>> drivers/gpu/drm/gma500/oaktrail_lvds.c | 2 +-
>>>>>>> drivers/gpu/drm/gma500/psb_intel_lvds.c | 2 +-
>>>>>>> drivers/gpu/drm/gma500/psb_intel_sdvo.c | 3 +-
>>>>>>> drivers/gpu/drm/i2c/tda998x_drv.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/Makefile | 1 +
>>>>>>> drivers/gpu/drm/i915/dvo.h | 15 +-
>>>>>>> drivers/gpu/drm/i915/dvo_ch7017.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/dvo_ch7xxx.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/dvo_ivch.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/dvo_ns2501.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/dvo_sil164.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/dvo_tfp410.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/i915_cmd_parser.c | 37 +-
>>>>>>> drivers/gpu/drm/i915/i915_debugfs.c | 455 ++--
>>>>>>> drivers/gpu/drm/i915/i915_dma.c | 49 +-
>>>>>>> drivers/gpu/drm/i915/i915_drv.c | 381 ++-
>>>>>>> drivers/gpu/drm/i915/i915_drv.h | 304 ++-
>>>>>>> drivers/gpu/drm/i915/i915_gem.c | 165 +-
>>>>>>> drivers/gpu/drm/i915/i915_gem_context.c | 21 +-
>>>>>>> drivers/gpu/drm/i915/i915_gem_evict.c | 39 +
>>>>>>> drivers/gpu/drm/i915/i915_gem_execbuffer.c | 80 +-
>>>>>>> drivers/gpu/drm/i915/i915_gem_fence.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/i915_gem_gtt.c | 139 +-
>>>>>>> drivers/gpu/drm/i915/i915_gem_gtt.h | 56 +-
>>>>>>> drivers/gpu/drm/i915/i915_gem_render_state.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/i915_gem_stolen.c | 3 +-
>>>>>>> drivers/gpu/drm/i915/i915_gem_tiling.c | 4 +
>>>>>>> drivers/gpu/drm/i915/i915_gem_userptr.c | 3 +-
>>>>>>> drivers/gpu/drm/i915/i915_gpu_error.c | 40 +-
>>>>>>> drivers/gpu/drm/i915/i915_guc_reg.h | 53 +-
>>>>>>> drivers/gpu/drm/i915/i915_guc_submission.c | 51 +-
>>>>>>> drivers/gpu/drm/i915/i915_irq.c | 297 ++-
>>>>>>> drivers/gpu/drm/i915/i915_params.c | 10 +-
>>>>>>> drivers/gpu/drm/i915/i915_reg.h | 2833
>>>>>>> +++++++++++-----------
>>>>>>> drivers/gpu/drm/i915/i915_suspend.c | 4 +-
>>>>>>> drivers/gpu/drm/i915/i915_sysfs.c | 13 +-
>>>>>>> drivers/gpu/drm/i915/i915_trace.h | 4 +-
>>>>>>> drivers/gpu/drm/i915/i915_vgpu.c | 6 +-
>>>>>>> drivers/gpu/drm/i915/i915_vgpu.h | 14 +-
>>>>>>> drivers/gpu/drm/i915/intel_atomic.c | 5 +-
>>>>>>> drivers/gpu/drm/i915/intel_atomic_plane.c | 2 +
>>>>>>> drivers/gpu/drm/i915/intel_audio.c | 121 +-
>>>>>>> drivers/gpu/drm/i915/intel_bios.c | 168 +-
>>>>>>> drivers/gpu/drm/i915/intel_bios.h | 4 -
>>>>>>> drivers/gpu/drm/i915/intel_crt.c | 64 +-
>>>>>>> drivers/gpu/drm/i915/intel_csr.c | 297 ++-
>>>>>>> drivers/gpu/drm/i915/intel_ddi.c | 309 ++-
>>>>>>> drivers/gpu/drm/i915/intel_display.c | 1314 ++++++----
>>>>>>> drivers/gpu/drm/i915/intel_dp.c | 1166 ++++-----
>>>>>>> drivers/gpu/drm/i915/intel_dp_link_training.c | 342 +++
>>>>>>> drivers/gpu/drm/i915/intel_dp_mst.c | 44 +-
>>>>>>> drivers/gpu/drm/i915/intel_drv.h | 267 +-
>>>>>>> drivers/gpu/drm/i915/intel_dsi.c | 114 +-
>>>>>>> drivers/gpu/drm/i915/intel_dsi.h | 2 +-
>>>>>>> drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 16 +-
>>>>>>> drivers/gpu/drm/i915/intel_dsi_pll.c | 6 +-
>>>>>>> drivers/gpu/drm/i915/intel_dvo.c | 29 +-
>>>>>>> drivers/gpu/drm/i915/intel_fbc.c | 742 +++---
>>>>>>> drivers/gpu/drm/i915/intel_fbdev.c | 62 +-
>>>>>>> drivers/gpu/drm/i915/intel_fifo_underrun.c | 143 +-
>>>>>>> drivers/gpu/drm/i915/intel_guc.h | 12 +-
>>>>>>> drivers/gpu/drm/i915/intel_guc_fwif.h | 72 +
>>>>>>> drivers/gpu/drm/i915/intel_guc_loader.c | 105 +-
>>>>>>> drivers/gpu/drm/i915/intel_hdmi.c | 142 +-
>>>>>>> drivers/gpu/drm/i915/intel_hotplug.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/intel_i2c.c | 88 +-
>>>>>>> drivers/gpu/drm/i915/intel_lrc.c | 195 +-
>>>>>>> drivers/gpu/drm/i915/intel_lrc.h | 19 +-
>>>>>>> drivers/gpu/drm/i915/intel_lvds.c | 27 +-
>>>>>>> drivers/gpu/drm/i915/intel_mocs.c | 61 +-
>>>>>>> drivers/gpu/drm/i915/intel_opregion.c | 79 +-
>>>>>>> drivers/gpu/drm/i915/intel_overlay.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/intel_panel.c | 201 +-
>>>>>>> drivers/gpu/drm/i915/intel_pm.c | 708 +++---
>>>>>>> drivers/gpu/drm/i915/intel_psr.c | 146 +-
>>>>>>> drivers/gpu/drm/i915/intel_ringbuffer.c | 206 +-
>>>>>>> drivers/gpu/drm/i915/intel_ringbuffer.h | 15 +-
>>>>>>> drivers/gpu/drm/i915/intel_runtime_pm.c | 806 ++++--
>>>>>>> drivers/gpu/drm/i915/intel_sdvo.c | 64 +-
>>>>>>> drivers/gpu/drm/i915/intel_sprite.c | 34 +-
>>>>>>> drivers/gpu/drm/i915/intel_tv.c | 2 +-
>>>>>>> drivers/gpu/drm/i915/intel_uncore.c | 284 ++-
>>>>>>> drivers/gpu/drm/imx/dw_hdmi-imx.c | 2 +-
>>>>>>> drivers/gpu/drm/imx/imx-drm-core.c | 2 +-
>>>>>>> drivers/gpu/drm/imx/imx-ldb.c | 2 +-
>>>>>>> drivers/gpu/drm/imx/imx-tve.c | 2 +-
>>>>>>> drivers/gpu/drm/imx/ipuv3-plane.c | 3 +-
>>>>>>> drivers/gpu/drm/imx/parallel-display.c | 2 +-
>>>>>>> drivers/gpu/drm/mgag200/mgag200_drv.h | 2 +-
>>>>>>> drivers/gpu/drm/mgag200/mgag200_fb.c | 2 +-
>>>>>>> drivers/gpu/drm/mgag200/mgag200_main.c | 4 +-
>>>>>>> drivers/gpu/drm/mgag200/mgag200_mode.c | 2 +-
>>>>>>> drivers/gpu/drm/msm/mdp/mdp4/mdp4_crtc.c | 3 +-
>>>>>>> drivers/gpu/drm/msm/mdp/mdp4/mdp4_dtv_encoder.c | 2 +-
>>>>>>> drivers/gpu/drm/msm/mdp/mdp4/mdp4_lcdc_encoder.c | 2 +-
>>>>>>> drivers/gpu/drm/msm/mdp/mdp4/mdp4_plane.c | 3 +-
>>>>>>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c | 2 +-
>>>>>>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 3 +-
>>>>>>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c | 2 +-
>>>>>>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 2 +-
>>>>>>> drivers/gpu/drm/msm/msm_drv.h | 4 +-
>>>>>>> drivers/gpu/drm/msm/msm_fb.c | 4 +-
>>>>>>> drivers/gpu/drm/nouveau/dispnv04/dac.c | 3 +-
>>>>>>> drivers/gpu/drm/nouveau/dispnv04/dfp.c | 2 +-
>>>>>>> drivers/gpu/drm/nouveau/dispnv04/tvnv04.c | 3 +-
>>>>>>> drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 3 +-
>>>>>>> drivers/gpu/drm/nouveau/nouveau_display.c | 4 +-
>>>>>>> drivers/gpu/drm/nouveau/nouveau_display.h | 2 +-
>>>>>>> drivers/gpu/drm/nouveau/nouveau_fbcon.h | 1 -
>>>>>>> drivers/gpu/drm/nouveau/nv50_display.c | 6 +-
>>>>>>> drivers/gpu/drm/omapdrm/omap_crtc.c | 2 +-
>>>>>>> drivers/gpu/drm/omapdrm/omap_drv.h | 6 +-
>>>>>>> drivers/gpu/drm/omapdrm/omap_encoder.c | 2 +-
>>>>>>> drivers/gpu/drm/omapdrm/omap_fb.c | 4 +-
>>>>>>> drivers/gpu/drm/omapdrm/omap_plane.c | 2 +-
>>>>>>> drivers/gpu/drm/qxl/qxl_display.c | 6 +-
>>>>>>> drivers/gpu/drm/qxl/qxl_drv.h | 2 +-
>>>>>>> drivers/gpu/drm/qxl/qxl_fb.c | 3 +-
>>>>>>> drivers/gpu/drm/radeon/atombios_encoders.c | 30 +-
>>>>>>> drivers/gpu/drm/radeon/radeon_display.c | 4 +-
>>>>>>> drivers/gpu/drm/radeon/radeon_dp_mst.c | 4 +-
>>>>>>> drivers/gpu/drm/radeon/radeon_fb.c | 1 -
>>>>>>> drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 15 +-
>>>>>>> drivers/gpu/drm/radeon/radeon_mode.h | 2 +-
>>>>>>> drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +-
>>>>>>> drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 2 +-
>>>>>>> drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c | 2 +-
>>>>>>> drivers/gpu/drm/rcar-du/rcar_du_kms.c | 2 +-
>>>>>>> drivers/gpu/drm/rcar-du/rcar_du_plane.c | 3 +-
>>>>>>> drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 2 +-
>>>>>>> drivers/gpu/drm/rockchip/rockchip_drm_fb.c | 6 +-
>>>>>>> drivers/gpu/drm/rockchip/rockchip_drm_fb.h | 2 +-
>>>>>>> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 +-
>>>>>>> drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 2 +-
>>>>>>> drivers/gpu/drm/shmobile/shmob_drm_kms.c | 2 +-
>>>>>>> drivers/gpu/drm/sti/sti_crtc.c | 2 +-
>>>>>>> drivers/gpu/drm/sti/sti_cursor.c | 2 +-
>>>>>>> drivers/gpu/drm/sti/sti_gdp.c | 2 +-
>>>>>>> drivers/gpu/drm/sti/sti_hqvdp.c | 2 +-
>>>>>>> drivers/gpu/drm/sti/sti_tvout.c | 7 +-
>>>>>>> drivers/gpu/drm/tegra/dc.c | 11 +-
>>>>>>> drivers/gpu/drm/tegra/drm.h | 2 +-
>>>>>>> drivers/gpu/drm/tegra/dsi.c | 2 +-
>>>>>>> drivers/gpu/drm/tegra/fb.c | 4 +-
>>>>>>> drivers/gpu/drm/tegra/hdmi.c | 2 +-
>>>>>>> drivers/gpu/drm/tegra/rgb.c | 2 +-
>>>>>>> drivers/gpu/drm/tegra/sor.c | 2 +-
>>>>>>> drivers/gpu/drm/tilcdc/tilcdc_drv.c | 2 +-
>>>>>>> drivers/gpu/drm/tilcdc/tilcdc_panel.c | 2 +-
>>>>>>> drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 2 +-
>>>>>>> drivers/gpu/drm/udl/udl_drv.h | 2 +-
>>>>>>> drivers/gpu/drm/udl/udl_encoder.c | 3 +-
>>>>>>> drivers/gpu/drm/udl/udl_fb.c | 5 +-
>>>>>>> drivers/gpu/drm/vc4/vc4_crtc.c | 2 +-
>>>>>>> drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +-
>>>>>>> drivers/gpu/drm/vc4/vc4_plane.c | 2 +-
>>>>>>> drivers/gpu/drm/virtio/virtgpu_display.c | 8 +-
>>>>>>> drivers/gpu/drm/virtio/virtgpu_drv.h | 2 +-
>>>>>>> drivers/gpu/drm/virtio/virtgpu_fb.c | 1 -
>>>>>>> drivers/gpu/drm/virtio/virtgpu_plane.c | 2 +-
>>>>>>> drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 2 +-
>>>>>>> drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c | 2 +-
>>>>>>> drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 2 +-
>>>>>>> drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 2 +-
>>>>>>> drivers/i2c/busses/i2c-designware-platdrv.c | 50 +-
>>>>>>> drivers/mfd/arizona-i2c.c | 246 +-
>>>>>>> drivers/mmc/card/block.c | 19 +-
>>>>>>> drivers/mmc/core/host.c | 22 +
>>>>>>> drivers/mmc/host/sdhci-pci-core.c | 26 +-
>>>>>>> drivers/pci/bus.c | 1 +
>>>>>>> drivers/pci/hotplug/acpiphp_glue.c | 8 +-
>>>>>>> drivers/pci/pci-driver.c | 10 +-
>>>>>>> drivers/pci/pci-sysfs.c | 5 +
>>>>>>> drivers/pci/pci.c | 176 ++
>>>>>>> drivers/pci/pci.h | 2 +
>>>>>>> drivers/pci/pcie/portdrv_core.c | 2 +
>>>>>>> drivers/pci/pcie/portdrv_pci.c | 52 +-
>>>>>>> drivers/pci/quirks.c | 4 +-
>>>>>>> drivers/pci/remove.c | 2 +
>>>>>>> drivers/pinctrl/intel/pinctrl-intel.c | 45 +-
>>>>>>> drivers/usb/host/xhci-pci.c | 2 +-
>>>>>>> include/drm/drmP.h | 3 +
>>>>>>> include/drm/drm_atomic.h | 6 +-
>>>>>>> include/drm/drm_crtc.h | 50 +-
>>>>>>> include/drm/drm_crtc_helper.h | 2 +-
>>>>>>> include/drm/drm_dp_mst_helper.h | 9 +-
>>>>>>> include/drm/drm_fb_cma_helper.h | 2 +-
>>>>>>> include/drm/drm_modes.h | 343 ++-
>>>>>>> include/drm/drm_rect.h | 3 +-
>>>>>>> include/drm/i915_component.h | 14 +
>>>>>>> include/drm/i915_pciids.h | 49 +-
>>>>>>> include/linux/gpio/driver.h | 14 +-
>>>>>>> include/linux/mmc/host.h | 4 +
>>>>>>> include/linux/pci.h | 3 +
>>>>>>> include/sound/hda_chmap.h | 78 +
>>>>>>> include/sound/hda_i915.h | 14 +
>>>>>>> include/sound/hdaudio.h | 2 +-
>>>>>>> include/sound/hdaudio_ext.h | 13 +
>>>>>>> include/sound/soc-dai.h | 1 +
>>>>>>> include/sound/soc-dapm.h | 4 +
>>>>>>> include/sound/soc-topology.h | 6 +-
>>>>>>> include/sound/soc.h | 53 +-
>>>>>>> include/uapi/drm/i915_drm.h | 23 +-
>>>>>>> include/uapi/sound/asoc.h | 2 +-
>>>>>>> init/main.c | 42 +
>>>>>>> sound/hda/Makefile | 2 +-
>>>>>>> sound/hda/ext/hdac_ext_bus.c | 4 +
>>>>>>> sound/hda/ext/hdac_ext_controller.c | 64 +-
>>>>>>> sound/hda/ext/hdac_ext_stream.c | 6 +-
>>>>>>> sound/hda/hdac_controller.c | 24 +-
>>>>>>> sound/hda/hdac_i915.c | 95 +-
>>>>>>> sound/hda/hdmi_chmap.c | 827 +++++++
>>>>>>> sound/hda/local.h | 10 +
>>>>>>> sound/pci/hda/hda_controller.c | 55 +-
>>>>>>> sound/pci/hda/hda_controller.h | 6 +-
>>>>>>> sound/pci/hda/hda_eld.c | 32 +-
>>>>>>> sound/pci/hda/hda_intel.c | 51 +-
>>>>>>> sound/pci/hda/hda_tegra.c | 5 +-
>>>>>>> sound/pci/hda/patch_hdmi.c | 1742 +++++++---
>>>>>>> ---
>>>>>>> sound/soc/codecs/hdac_hdmi.c | 163 +-
>>>>>>> sound/soc/generic/simple-card.c | 12 +-
>>>>>>> sound/soc/intel/Kconfig | 107 +-
>>>>>>> sound/soc/intel/atom/sst-atom-controls.c | 1 +
>>>>>>> sound/soc/intel/atom/sst-atom-controls.h | 1 +
>>>>>>> sound/soc/intel/atom/sst-mfld-platform-pcm.c | 24 +-
>>>>>>> sound/soc/intel/atom/sst/sst_acpi.c | 70 +-
>>>>>>> sound/soc/intel/boards/Makefile | 10 +
>>>>>>> sound/soc/intel/boards/bxt_florida.c | 595 +++++
>>>>>>> sound/soc/intel/boards/bxt_rt298.c | 357 +++
>>>>>>> sound/soc/intel/boards/bytcr_rt5651.c | 332 +++
>>>>>>> sound/soc/intel/boards/cht_bsw_max98090_ti.c | 24 +-
>>>>>>> sound/soc/intel/boards/cht_bsw_rt5645.c | 20 +-
>>>>>>> sound/soc/intel/boards/cht_bsw_rt5672.c | 7 +-
>>>>>>> sound/soc/intel/boards/skl_nau88l25_max98357a.c | 640 +++++
>>>>>>> sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 696 ++++++
>>>>>>> sound/soc/intel/boards/skl_rt286.c | 283 ++-
>>>>>>> sound/soc/intel/common/Makefile | 7 +-
>>>>>>> sound/soc/intel/common/sst-acpi.c | 45 +-
>>>>>>> sound/soc/intel/common/sst-acpi.h | 36 +
>>>>>>> sound/soc/intel/common/sst-dsp-priv.h | 9 +-
>>>>>>> sound/soc/intel/common/sst-dsp.c | 2 +-
>>>>>>> sound/soc/intel/common/sst-dsp.h | 2 +-
>>>>>>> sound/soc/intel/common/sst-firmware.c | 4 +-
>>>>>>> sound/soc/intel/common/sst-match-acpi.c | 82 +
>>>>>>> sound/soc/intel/haswell/sst-haswell-dsp.c | 2 +-
>>>>>>> sound/soc/intel/haswell/sst-haswell-ipc.c | 33 +-
>>>>>>> sound/soc/intel/skylake/Makefile | 2 +-
>>>>>>> sound/soc/intel/skylake/bxt-sst.c | 332 +++
>>>>>>> sound/soc/intel/skylake/skl-messages.c | 538 ++--
>>>>>>> sound/soc/intel/skylake/skl-nhlt.c | 68 +-
>>>>>>> sound/soc/intel/skylake/skl-pcm.c | 498 +++-
>>>>>>> sound/soc/intel/skylake/skl-sst-cldma.c | 97 +-
>>>>>>> sound/soc/intel/skylake/skl-sst-dsp.c | 17 +-
>>>>>>> sound/soc/intel/skylake/skl-sst-dsp.h | 41 +-
>>>>>>> sound/soc/intel/skylake/skl-sst-ipc.c | 123 +-
>>>>>>> sound/soc/intel/skylake/skl-sst-ipc.h | 14 +
>>>>>>> sound/soc/intel/skylake/skl-sst.c | 222 +-
>>>>>>> sound/soc/intel/skylake/skl-topology.c | 960 ++++++--
>>>>>>> sound/soc/intel/skylake/skl-topology.h | 98 +-
>>>>>>> sound/soc/intel/skylake/skl-tplg-interface.h | 106 +-
>>>>>>> sound/soc/intel/skylake/skl.c | 361 ++-
>>>>>>> sound/soc/intel/skylake/skl.h | 29 +-
>>>>>>> sound/soc/sh/rcar/core.c | 2 +-
>>>>>>> sound/soc/sh/rcar/rsrc-card.c | 6 +-
>>>>>>> sound/soc/soc-core.c | 866 ++++---
>>>>>>> sound/soc/soc-dapm.c | 12 +-
>>>>>>> sound/soc/soc-ops.c | 4 +-
>>>>>>> sound/soc/soc-pcm.c | 22 +-
>>>>>>> sound/soc/soc-topology.c | 2 +
>>>>>>> 329 files changed, 18268 insertions(+), 8697 deletions(-)
>>>>>>> create mode 100644 drivers/gpu/drm/i915/intel_dp_link_training.c
>>>>>>> create mode 100644 include/sound/hda_chmap.h
>>>>>>> create mode 100644 sound/hda/hdmi_chmap.c
>>>>>>> create mode 100644 sound/soc/intel/boards/bxt_florida.c
>>>>>>> create mode 100644 sound/soc/intel/boards/bxt_rt298.c
>>>>>>> create mode 100644 sound/soc/intel/boards/bytcr_rt5651.c
>>>>>>> create mode 100644 sound/soc/intel/boards/skl_nau88l25_max98357a.c
>>>>>>> create mode 100644 sound/soc/intel/boards/skl_nau88l25_ssm4567.c
>>>>>>> create mode 100644 sound/soc/intel/common/sst-acpi.h
>>>>>>> create mode 100644 sound/soc/intel/common/sst-match-acpi.c
>>>>>>> create mode 100644 sound/soc/intel/skylake/bxt-sst.c
>>>>>>>
>>>>
>>>
>>
>
More information about the linux-yocto
mailing list