[linux-yocto] [PATCH 19/29] pwm-pca9685: enable ACPI device found on Galileo Gen2
Saul Wold
sgw at linux.intel.com
Fri Feb 5 06:53:36 PST 2016
From: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
There is a chip connected to i2c bus on Intel Galileo Gen2 board. Enable it via
ACPI ID INT3492.
Cc: Thierry Reding <thierry.reding at gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Upstream-status: Submitted
Signed-off-by: Saul Wold <sgw at linux.intel.com>
---
drivers/pwm/Kconfig | 2 +-
drivers/pwm/pwm-pca9685.c | 20 ++++++++++++++++----
2 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index b1541f4..749198f 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -223,7 +223,7 @@ config PWM_MXS
config PWM_PCA9685
tristate "NXP PCA9685 PWM driver"
- depends on OF && I2C
+ depends on I2C
select REGMAP_I2C
help
Generic PWM framework driver for NXP PCA9685 LED controller.
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 34b5c27..8a1bd49 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -18,9 +18,11 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/pwm.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -212,7 +214,6 @@ static const struct regmap_config pca9685_regmap_i2c_config = {
static int pca9685_pwm_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct device_node *np = client->dev.of_node;
struct pca9685 *pca;
int ret;
int mode2;
@@ -233,12 +234,12 @@ static int pca9685_pwm_probe(struct i2c_client *client,
regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
- if (of_property_read_bool(np, "invert"))
+ if (device_property_read_bool(&client->dev, "invert"))
mode2 |= MODE2_INVRT;
else
mode2 &= ~MODE2_INVRT;
- if (of_property_read_bool(np, "open-drain"))
+ if (device_property_read_bool(&client->dev, "open-drain"))
mode2 &= ~MODE2_OUTDRV;
else
mode2 |= MODE2_OUTDRV;
@@ -276,17 +277,28 @@ static const struct i2c_device_id pca9685_id[] = {
};
MODULE_DEVICE_TABLE(i2c, pca9685_id);
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id pca9685_acpi_ids[] = {
+ { "INT3492", 0 },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
+#endif
+
+#ifdef CONFIG_OF
static const struct of_device_id pca9685_dt_ids[] = {
{ .compatible = "nxp,pca9685-pwm", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
+#endif
static struct i2c_driver pca9685_i2c_driver = {
.driver = {
.name = "pca9685-pwm",
.owner = THIS_MODULE,
- .of_match_table = pca9685_dt_ids,
+ .acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
+ .of_match_table = of_match_ptr(pca9685_dt_ids),
},
.probe = pca9685_pwm_probe,
.remove = pca9685_pwm_remove,
--
2.5.0
More information about the linux-yocto
mailing list