[linux-yocto] [PATCH 0/6] [linux-yocto-3.10] valleyisland-io-4.0: Updated for Bay Trail IO

[wan.ahmad.zainie.wan.mohamad at intel.com]

From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad at intel.com>

Hi.

This patch is to update the feature branch (valleyisland-io-4.0) with the
following changes:
1. Rearrange the dmaengine commits in the correct order.
2. Update of i2c-designware for mode switching.

It was built with Valley Island configurations and tested working on
Minnowboard MAX board. Please review and provide feedback if any.

This patch is targetted for linux-yocto-3.10 on valleyisand-io-4.0 branch.

Thanks.

Best regards,
Zainie


Andy Shevchenko (2):
  dmaengine: dw: apply both HS interfaces and remove slave_id usage
  dmaengine: dw: move clock operations to platform.c

Maurice Petallo (1):
  i2c: allow Designware I2C to be probed before SMBus for Baytrail

Ng, Wei Tee (1):
  Revert "dmaengine: dw: move clock operations to platform.c"

Thomas Gleixner (1):
  genirq: x86: Ensure that dynamic irq allocation does not conflict

cchew14 (1):
  i2c: designware: enable fast and standard speed mode switching

 arch/x86/kernel/apic/io_apic.c              |  5 +++++
 drivers/dma/dw/core.c                       | 32 ++---------------------------
 drivers/dma/dw/platform.c                   |  6 ++++--
 drivers/dma/dw/regs.h                       |  7 ++++---
 drivers/i2c/busses/Makefile                 |  2 +-
 drivers/i2c/busses/i2c-designware-pcidrv.c  | 12 +++++++++++
 drivers/i2c/busses/i2c-designware-platdrv.c |  9 +++++++-
 include/linux/irq.h                         |  2 ++
 kernel/irq/irqdesc.c                        |  7 +++++++
 kernel/softirq.c                            |  5 +++++
 10 files changed, 50 insertions(+), 37 deletions(-)

-- 
1.9.1