[linux-yocto] [PATCH 2/2] meta: axxiaarm: Adding new fragments
Daniel Dragomir
daniel.dragomir at windriver.com
Tue Mar 17 10:16:33 PDT 2015
For axxiaarm bsp, adding new fragments for standard and preempt-rt
kernel types.
Signed-off-by: Daniel Dragomir <daniel.dragomir at windriver.com>
---
.../bsp/axxiaarm/axxiaarm-preempt-rt.scc | 8 +
.../bsp/axxiaarm/axxiaarm-standard.scc | 9 +
meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm.cfg | 291 ++++++++++++++++++++
meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm.scc | 14 +
meta/cfg/kernel-cache/bsp/axxiaarm/edac.cfg | 7 +
meta/cfg/kernel-cache/bsp/axxiaarm/edac.scc | 4 +
meta/cfg/kernel-cache/bsp/axxiaarm/hardware.kcf | 1 +
meta/cfg/kernel-cache/bsp/axxiaarm/kvm.cfg | 7 +
meta/cfg/kernel-cache/bsp/axxiaarm/kvm.scc | 4 +
meta/cfg/kernel-cache/bsp/axxiaarm/no-preempt.cfg | 1 +
meta/cfg/kernel-cache/bsp/axxiaarm/no-preempt.scc | 1 +
meta/cfg/kernel-cache/bsp/axxiaarm/rapidio.cfg | 12 +
meta/cfg/kernel-cache/bsp/axxiaarm/rapidio.scc | 4 +
13 files changed, 363 insertions(+)
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm-preempt-rt.scc
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm-standard.scc
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm.cfg
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm.scc
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/edac.cfg
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/edac.scc
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/hardware.kcf
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/kvm.cfg
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/kvm.scc
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/no-preempt.cfg
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/no-preempt.scc
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/rapidio.cfg
create mode 100644 meta/cfg/kernel-cache/bsp/axxiaarm/rapidio.scc
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm-preempt-rt.scc b/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm-preempt-rt.scc
new file mode 100644
index 0000000..e1c2aec
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm-preempt-rt.scc
@@ -0,0 +1,8 @@
+define KMACHINE axxiaarm
+define KTYPE preempt-rt
+define KARCH arm
+
+include ktypes/preempt-rt
+branch axxia
+
+include axxiaarm.scc
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm-standard.scc b/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm-standard.scc
new file mode 100644
index 0000000..ab6be36
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm-standard.scc
@@ -0,0 +1,9 @@
+define KMACHINE axxiaarm
+define KTYPE standard
+define KARCH arm
+
+include ktypes/standard
+branch axxia
+
+include axxiaarm.scc
+include no-preempt.scc
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm.cfg b/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm.cfg
new file mode 100644
index 0000000..1e56ed4
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm.cfg
@@ -0,0 +1,291 @@
+#.........................................................................
+# WARNING
+#
+# This file is a kernel configuration fragment, and not a full kernel
+# configuration file. The final kernel configuration is made up of
+# an assembly of processed fragments, each of which is designed to
+# capture a specific part of the final configuration (e.g. platform
+# configuration, feature configuration, and board specific hardware
+# configuration). For more information on kernel configuration, please
+# consult the product documentation.
+#
+#.........................................................................
+
+#
+# System Type
+#
+CONFIG_ARCH_AXXIA=y
+
+
+#
+# Axxia platform type
+#
+CONFIG_ARCH_AXXIA_GIC=y
+CONFIG_ARCH_AXXIA_DT=y
+CONFIG_ARM_TIMER_SP804=y
+
+
+#
+# Processor Features
+#
+CONFIG_ARM_LPAE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CACHE_PL310=y
+
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+CONFIG_ARM_ERRATA_643719=y
+CONFIG_ARM_ERRATA_742230=y
+CONFIG_ARM_ERRATA_742231=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_751472=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_PL310_ERRATA_588369=y
+CONFIG_PL310_ERRATA_727915=y
+CONFIG_PL310_ERRATA_753970=y
+CONFIG_PL310_ERRATA_769419=y
+
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_CCN=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+
+#
+# Kernel Features
+#
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_HIGHMEM=y
+CONFIG_NR_CPUS=16
+
+#
+# Boot options
+#
+CONFIG_USE_OF=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_NEON=y
+
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=y
+
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+
+#
+# Network testing
+#
+# CONFIG_WIRELESS is not set
+
+#
+# Generic Driver Options
+#
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+
+CONFIG_DTC=y
+CONFIG_OF=y
+
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+
+#
+# Misc devices
+#
+CONFIG_LSI_MTC=y
+CONFIG_LSI_NCR=y
+CONFIG_SCSI=y
+CONFIG_ATA=y
+
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_CHR_DEV_SG=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO_AMBAKMI=y
+
+#
+# Character devices
+#
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_AXXIA=y
+
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+
+CONFIG_PPS=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+
+#
+# Memory mapped GPIO drivers:
+#
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+
+#
+# Distributed Switch Architecture drivers
+#
+CONFIG_ETHERNET=y
+CONFIG_LSI_NET=y
+CONFIG_LSI_NET_NUM_RX_DESC=32
+CONFIG_LSI_NET_RX_BUF_SZ=131072
+CONFIG_LSI_NET_NUM_TX_DESC=32
+CONFIG_LSI_NET_TX_BUF_SZ=131072
+CONFIG_E1000=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGB_HWMON=y
+CONFIG_IGBVF=y
+CONFIG_SMC91X=y
+
+
+#
+# USB Network Adapters
+#
+# CONFIG_WLAN is not set
+
+#
+# PTP clock support
+#
+CONFIG_DP83640_PHY=y
+
+#
+# USB GPIO expanders:
+#
+CONFIG_HWMON_VID=y
+
+#
+# Native drivers
+#
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_JC42=y
+CONFIG_PMBUS=y
+CONFIG_SENSORS_LTC2978=y
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SYSCON=y
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_CI13612_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+
+#
+# DMA Devices
+#
+CONFIG_DMADEVICES=y
+CONFIG_LSI_DMA=y
+CONFIG_PL330_DMA=y
+
+#
+# Hardware Spinlock drivers
+#
+CONFIG_MAILBOX=y
+CONFIG_PL320_MBOX=y
+# CONFIG_IOMMU_SUPPORT is not set
+
+#
+# Caches
+#
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_FSCACHE_HISTOGRAM=y
+CONFIG_FSCACHE_DEBUG=y
+CONFIG_FSCACHE_OBJECT_LIST=y
+CONFIG_CACHEFILES=y
+CONFIG_CACHEFILES_HISTOGRAM=y
+
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+
+CONFIG_VMFS_FS=y
+CONFIG_VMFS_DEV_BASE=0x20101C0000
+CONFIG_VMFS_IRQ=0
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm.scc b/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm.scc
new file mode 100644
index 0000000..6832186
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/axxiaarm.scc
@@ -0,0 +1,14 @@
+# Core arm configuation settings
+include arch/arm/arm.scc nopatch
+
+kconf hardware axxiaarm.cfg
+
+include features/profiling/profiling.scc
+include features/latencytop/latencytop.scc
+include features/usb/ehci-hcd.scc
+include cfg/usb-mass-storage.scc
+include cfg/virtio.scc
+
+include rapidio.scc
+include edac.scc
+include kvm.scc
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/edac.cfg b/meta/cfg/kernel-cache/bsp/axxiaarm/edac.cfg
new file mode 100644
index 0000000..840af5d
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/edac.cfg
@@ -0,0 +1,7 @@
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_AXXIA_SYSMEM=y
+CONFIG_EDAC_AXXIA_L3=y
+CONFIG_EDAC_AXXIA_L2_CPU=y
+
+# CONFIG_LSI_SMMON is not set
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/edac.scc b/meta/cfg/kernel-cache/bsp/axxiaarm/edac.scc
new file mode 100644
index 0000000..d644aa3
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/edac.scc
@@ -0,0 +1,4 @@
+define KFEATURE_DESCRIPTION "Enable EDAC driver support for System Memory, L3 cache, L2 cache and CPU"
+define KFEATURE_COMPATIBILITY all
+
+kconf hardware edac.cfg
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/hardware.kcf b/meta/cfg/kernel-cache/bsp/axxiaarm/hardware.kcf
new file mode 100644
index 0000000..6aa8119
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/hardware.kcf
@@ -0,0 +1 @@
+arch/arm/mach-axxia/Kconfig
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/kvm.cfg b/meta/cfg/kernel-cache/bsp/axxiaarm/kvm.cfg
new file mode 100644
index 0000000..a6003e4
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/kvm.cfg
@@ -0,0 +1,7 @@
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=y
+CONFIG_KVM_ARM_HOST=y
+CONFIG_KVM_ARM_MAX_VCPUS=4
+CONFIG_KVM_ARM_VGIC=y
+CONFIG_KVM_ARM_TIMER=y
+CONFIG_KVM_MMIO=y
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/kvm.scc b/meta/cfg/kernel-cache/bsp/axxiaarm/kvm.scc
new file mode 100644
index 0000000..c867555
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/kvm.scc
@@ -0,0 +1,4 @@
+define KFEATURE_DESCRIPTION "Enable KVM host support"
+define KFEATURE_COMPATIBILITY all
+
+kconf non-hardware kvm.cfg
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/no-preempt.cfg b/meta/cfg/kernel-cache/bsp/axxiaarm/no-preempt.cfg
new file mode 100644
index 0000000..0cbeb5a
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/no-preempt.cfg
@@ -0,0 +1 @@
+CONFIG_PREEMPT_NONE=y
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/no-preempt.scc b/meta/cfg/kernel-cache/bsp/axxiaarm/no-preempt.scc
new file mode 100644
index 0000000..1e75e15
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/no-preempt.scc
@@ -0,0 +1 @@
+kconf non-hardware no-preempt.cfg
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/rapidio.cfg b/meta/cfg/kernel-cache/bsp/axxiaarm/rapidio.cfg
new file mode 100644
index 0000000..2a5c8ad
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/rapidio.cfg
@@ -0,0 +1,12 @@
+CONFIG_RAPIDIO=y
+CONFIG_AXXIA_RIO=y
+CONFIG_RIO_MAINT_WIN_SIZE=0x1000000
+CONFIG_AXXIA_RIO_STAT=y
+CONFIG_OB_DME_ENTRY_SIZE=4096
+CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
+CONFIG_RAPIDIO_ENUM_BASIC=y
+CONFIG_RAPIDIO_CPS_GEN2=y
+
+CONFIG_RIONET=y
+CONFIG_RIONET_TX_SIZE=128
+CONFIG_RIONET_RX_SIZE=128
diff --git a/meta/cfg/kernel-cache/bsp/axxiaarm/rapidio.scc b/meta/cfg/kernel-cache/bsp/axxiaarm/rapidio.scc
new file mode 100644
index 0000000..36cb6e6
--- /dev/null
+++ b/meta/cfg/kernel-cache/bsp/axxiaarm/rapidio.scc
@@ -0,0 +1,4 @@
+define KFEATURE_DESCRIPTION "Enable support for the sRIO controller"
+define KFEATURE_COMPATIBILITY all
+
+kconf hardware rapidio.cfg
--
1.7.9.5
More information about the linux-yocto
mailing list