[linux-yocto] [PATCH 00/34] [linux-yocto-3.19] standard/base: Backport Braswell bug fixes patches from mainline kernel into Yocto Project linux kernel v3.19.

Chang, Rebecca Swee Fun rebecca.swee.fun.chang at intel.com
Tue Apr 28 17:04:12 PDT 2015


Thanks Bruce.

Regards,
Rebecca

> -----Original Message-----
> From: linux-yocto-bounces at yoctoproject.org [mailto:linux-yocto-
> bounces at yoctoproject.org] On Behalf Of Bruce Ashfield
> Sent: 29 April, 2015 3:25 AM
> To: Ng, Wei Tee; linux-yocto at yoctoproject.org
> Subject: Re: [linux-yocto] [PATCH 00/34] [linux-yocto-3.19] standard/base:
> Backport Braswell bug fixes patches from mainline kernel into Yocto Project
> linux kernel v3.19.
> 
> On 2015-04-27 11:20 PM, wei.tee.ng at intel.com wrote:
> > From: Ng Wei Tee <wei.tee.ng at intel.com>
> >
> > Hi all,
> >
> > This patch series is to backport Braswell bug fixes and feature
> > improvement patches from upstream kernel into Yocto Project linux
> > kernel v3.19. These back-ported patches had include I/O drivers such
> > as HS-UART, I2C, SMBUS i801, Pinctrl driver, ACPI and DMA.
> >
> > This configuration was built and tested working on CherryHill
> > platform. Please review and provide feedback if any.
> >
> > This patch is target for linux-yocto-3.19 on standard/base branch.
> >
> > Thanks.
> >
> > Regards,
> > Wei Tee
> > The following changes since commit
> d5d30ba4d20e65c15df624ffce7a5cd38150348b:
> >
> >    Merge tag 'v3.19.5' into standard/base (2015-04-23 11:58:13 -0400)
> >
> > are available in the git repository at:
> 
> Looks good. I've merged the series to standard/base (and BSP branches).
> 
> It's on the server now, update your SRCREVs locally to test it out.
> 
> Bruce
> 
> >
> >
> >    git://git.yoctoproject.org/linux-yocto-contrib weiteeng/backport-bsw
> >
> > http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=weitee
> > ng/backport-bsw
> >
> > Alexey Brodkin (1):
> >    i2c: designware: Suppress error message if platform_get_irq() < 0
> >
> > Andy Shevchenko (4):
> >    i2c: designware-pci: remove Moorestown support
> >    i2c: designware-pci: no need to provide clk_khz
> >    dmaengine: dw: provide DMA capabilities
> >    dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
> >
> > David Box (2):
> >    i2c: designware: Add i2c bus locking support
> >    i2c: designware: Add Intel Baytrail PMIC I2C bus support
> >
> > Desmond Liu (1):
> >    serial: 8250_dw: Fix get_mctrl behaviour
> >
> > Feng Kan (1):
> >    serial: 8250: add support for ACPI-probed serial port for X-Gene
> >      platform
> >
> > Heikki Krogerus (2):
> >    ACPI / LPSS: check the result of ioremap()
> >    serial: 8250_pci: remove one useless explicit type conversion
> >
> > Jarkko Nikula (6):
> >    i2c: designware: Do not calculate SCL timing parameters needlessly
> >    i2c: i801: Don't break user-visible strings
> >    i2c: i801: Remove i801_driver forward declaration
> >    i2c: i801: Use managed devm_* memory and irq allocation
> >    i2c: i801: Remove pci_enable_device() call from i801_resume()
> >    i2c: i801: Use managed pcim_* PCI device initialization and
> >      reservation
> >
> > Jiang Liu (1):
> >    x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug
> >
> > Jie Yang (1):
> >    dmaengine: dw: don't handle interrupt when dmaengine is not used
> >
> > Jisheng Zhang (1):
> >    i2c: designware: use {readl|writel}_relaxed instead of readl/writel
> >
> > Len Brown (1):
> >    intel_idle: Add support for the Airmont Core in the Cherrytrail and
> >      Braswell SOCs
> >
> > Maxime Ripard (1):
> >    dmaengine: dw: Split device_control
> >
> > Mika Westerberg (6):
> >    pinctrl: baytrail: Relax GPIO request rules
> >    pinctrl: baytrail: Clear interrupt triggering from pins that are in
> >      GPIO mode
> >    pinctrl: baytrail: Rework interrupt handling
> >    pinctrl: baytrail: Save pin context over system sleep
> >    pinctrl: cherryview: Save and restore pin configs over system sleep
> >    pinctrl: cherryview: Configure HiZ pins to be input when requested as
> >      GPIOs
> >
> > Nicholas Mc Guire (1):
> >    i2c: designware: fixup return handling of
> > wait_for_completion_timeout
> >
> > Rafael J. Wysocki (1):
> >    ACPI: Introduce has_acpi_companion()
> >
> > Wang YanQing (2):
> >    serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S
> >    serial:8250:8250_pci: delete unneeded quirk entries
> >
> > Wolfram Sang (1):
> >    pinctrl: intel: drop owner assignment from platform_drivers
> >
> > qipeng.zha (1):
> >    pinctrl: update direction_output function of cherryview driver
> >
> >   Documentation/devicetree/bindings/dma/snps-dma.txt |    2 +-
> >   .../bindings/serial/snps-dw-apb-uart.txt           |   16 ++
> >   arch/arc/boot/dts/abilis_tb10x.dtsi                |    2 +-
> >   arch/arm/boot/dts/spear13xx.dtsi                   |    4 +-
> >   arch/avr32/mach-at32ap/at32ap700x.c                |    2 +-
> >   drivers/acpi/Kconfig                               |    6 +
> >   drivers/acpi/Makefile                              |    1 +
> >   drivers/acpi/acpi_lpss.c                           |    2 +
> >   drivers/acpi/glue.c                                |    4 +-
> >   drivers/acpi/internal.h                            |    7 +
> >   drivers/acpi/ioapic.c                              |  229 ++++++++++++++++++
> >   drivers/acpi/pci_root.c                            |    3 +
> >   drivers/dma/dw/core.c                              |  103 ++++----
> >   drivers/dma/dw/platform.c                          |    4 +-
> >   drivers/dma/dw/regs.h                              |    2 +-
> >   drivers/i2c/busses/Kconfig                         |   11 +
> >   drivers/i2c/busses/Makefile                        |    1 +
> >   drivers/i2c/busses/i2c-designware-baytrail.c       |  160 ++++++++++++
> >   drivers/i2c/busses/i2c-designware-core.c           |   86 ++++---
> >   drivers/i2c/busses/i2c-designware-core.h           |   12 +
> >   drivers/i2c/busses/i2c-designware-pcidrv.c         |   31 ---
> >   drivers/i2c/busses/i2c-designware-platdrv.c        |   30 ++-
> >   drivers/i2c/busses/i2c-i801.c                      |   51 ++--
> >   drivers/idle/intel_idle.c                          |   52 ++++
> >   drivers/iommu/intel-iommu.c                        |    2 +-
> >   drivers/pinctrl/intel/pinctrl-baytrail.c           |  254 +++++++++++++++-----
> >   drivers/pinctrl/intel/pinctrl-cherryview.c         |  123 +++++++++-
> >   drivers/tty/serial/8250/8250_dw.c                  |   43 ++++
> >   drivers/tty/serial/8250/8250_pci.c                 |   22 +-
> >   include/linux/acpi.h                               |   10 +
> >   include/linux/platform_data/dma-dw.h               |    4 +-
> >   31 files changed, 1032 insertions(+), 247 deletions(-)
> >   create mode 100644 drivers/acpi/ioapic.c
> >   create mode 100644 drivers/i2c/busses/i2c-designware-baytrail.c
> >
> 
> --
> _______________________________________________
> linux-yocto mailing list
> linux-yocto at yoctoproject.org
> https://lists.yoctoproject.org/listinfo/linux-yocto


More information about the linux-yocto mailing list