[linux-yocto] [PATCH 23/34] i2c: designware-pci: no need to provide clk_khz

[wei.tee.ng at intel.com]

From: Andy Shevchenko <andriy.shevchenko at linux.intel.com>

The clk_khz field makes sense only if SS counters are not provided. Since we
provide them for Haswell and Baytrail explicitly we may omit the clk_khz
parameter.

Reviewed-by: Jarkko Nikula <jarkko.nikula at linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Signed-off-by: Wolfram Sang <wsa at the-dreams.de>
(cherry picked from commit c99d49a964c700ad0bab5c54e2f559fce0487fad)

Signed-off-by: Ng Wei Tee <wei.tee.ng at intel.com>
---
 drivers/i2c/busses/i2c-designware-pcidrv.c |    2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 5c6fca7..87f51f5 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -145,7 +145,6 @@ static struct  dw_pci_controller  dw_pci_controllers[] = {
 		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
 		.tx_fifo_depth = 32,
 		.rx_fifo_depth = 32,
-		.clk_khz = 100000,
 		.functionality = I2C_FUNC_10BIT_ADDR,
 		.scl_sda_cfg = &byt_config,
 	},
@@ -154,7 +153,6 @@ static struct  dw_pci_controller  dw_pci_controllers[] = {
 		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
 		.tx_fifo_depth = 32,
 		.rx_fifo_depth = 32,
-		.clk_khz = 100000,
 		.functionality = I2C_FUNC_10BIT_ADDR,
 		.scl_sda_cfg = &hsw_config,
 	},
-- 
1.7.9.5