[linux-yocto] [PATCHv2 0/6] [3.10] Feature branch for Baytrail IO

[Chang, Rebecca Swee Fun]

Hi Bruce,

The merge are working fine. Thanks a lot. I will submit the changes on meta branch to merge valleyisland-io-3.0 feature branch later by today (Malaysia time). Thanks again :)

Rebecca

> -----Original Message-----
> From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com]
> Sent: 03 September, 2014 3:18 AM
> To: Chang, Rebecca Swee Fun; linux-yocto at yoctoproject.org
> Subject: Re: [linux-yocto] [PATCHv2 0/6] [3.10] Feature branch for Baytrail IO
> 
> On 2014-08-29, 5:29 AM, rebecca.swee.fun.chang at intel.com wrote:
> > From: Chang Rebecca Swee Fun <rebecca.swee.fun.chang at intel.com>
> >
> > Hi all,
> >
> > Patchv2:
> > This is the 2nd revision of the feature branch I have submitted yesterday.
> > I have used the outdated board file for Baytrail in previous submission.
> > I have updated the tree with a latest board file to enable DMA clock
> > for Baytrail.
> >
> > Change log summary:
> > x86/byt: enable board file for Baytrail LPSS PCI mode Update with new
> > board file to enable LPIO DMA 1.
> >
> > Thanks and regards.
> > Rebecca
> >
> > Patchv1:
> > This is the rebased feature branch for valley island BSP. The purpose
> > of this feature branch is to stage the Baytrail I/O specific patches
> > that is not encouraged to be upstream, for example, board file. This
> > tree also consists of Baytrail pinctrl code base which it is not upstream.
> >
> > I intend to create a new branch, named: valleyisland-io-3.0. The old
> > version feature branch (valleyisland-io-1.0 and valleyisland-io-2.0)
> > shall be removed once everything has lined up accordingly.
> >
> > Sorry that the valleyisland-io-2.0 was created and not used until now.
> > For future backport commits, we will target to merge in standard/base
> > instead of putting them in feature branch.
> >
> > Please review and if no further comments, please help to put this
> > patches into new branch: valleyisland-io-3.0. Sorry for any incovenient caused.
> 
> These look ok to me, and no worries about the 2.0 feature branch. I've pushed
> this change to the repositories now, in a 3.0 branch.
> 
> Make sure you are up to date with yocto/oe-core master, since the tools have
> been updated and can now handle the valleyisland-io-3.0 branch being the
> same as standard/base (i.e. no reset of the content).
> 
> Cheers,
> 
> Bruce
> 
> >
> > Thanks in advance.
> >
> > Rebecca
> >
> > The following changes since commit
> aa677a2d02677ec92d59a8c36d001cf2f5cf3260:
> >
> >    usb/core: fix merge issue (2014-06-16 12:24:47 -0400)
> >
> > are available in the git repository at:
> >
> >    git://git.yoctoproject.org/linux-yocto-contrib rebeccas/rebase-feature-
> branch
> >
> > http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebecc
> > as/rebase-feature-branch
> >
> > Chang Rebecca Swee Fun (1):
> >    x86/byt: enable board file for Baytrail LPSS PCI mode
> >
> > Chew, Chiau Ee (1):
> >    x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS
> >
> > Chew, Kean Ho (4):
> >    pinctrl-baytrail: add function mux checking in gpio pin request
> >    pinctrl-baytrail: unmap interrupt when free the gpio pin
> >    pinctrl-baytrail: enable platform device in the absent of ACPI
> >      enumeration
> >    pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI
> >      system
> >
> >   arch/x86/Kconfig                       |  11 ++-
> >   arch/x86/platform/Makefile             |   3 +
> >   arch/x86/platform/byt/Makefile         |   1 +
> >   arch/x86/platform/byt/byt-board.c      |  92 +++++++++++++++++++
> >   drivers/pinctrl/Kconfig                |  19 +++-
> >   drivers/pinctrl/Makefile               |   1 +
> >   drivers/pinctrl/pinctrl-baytrail-dev.c | 159
> +++++++++++++++++++++++++++++++++
> >   drivers/pinctrl/pinctrl-baytrail.c     | 101 +++++++++++++++++++--
> >   include/linux/pinctrl/pinctrl-byt.h    |  16 ++++
> >   9 files changed, 393 insertions(+), 10 deletions(-)
> >   create mode 100644 arch/x86/platform/byt/Makefile
> >   create mode 100644 arch/x86/platform/byt/byt-board.c
> >   create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c
> >   create mode 100644 include/linux/pinctrl/pinctrl-byt.h
> >