[linux-yocto] [PATCHv2 0/6] [3.10] Feature branch for Baytrail IO

[Bruce Ashfield]

On 2014-08-29, 5:29 AM, rebecca.swee.fun.chang at intel.com wrote:
> From: Chang Rebecca Swee Fun <rebecca.swee.fun.chang at intel.com>
>
> Hi all,
>
> Patchv2:
> This is the 2nd revision of the feature branch I have submitted yesterday.
> I have used the outdated board file for Baytrail in previous submission.
> I have updated the tree with a latest board file to enable DMA clock
> for Baytrail.
>
> Change log summary:
> x86/byt: enable board file for Baytrail LPSS PCI mode
> Update with new board file to enable LPIO DMA 1.
>
> Thanks and regards.
> Rebecca
>
> Patchv1:
> This is the rebased feature branch for valley island BSP. The purpose of this
> feature branch is to stage the Baytrail I/O specific patches that is
> not encouraged to be upstream, for example, board file. This tree also
> consists of Baytrail pinctrl code base which it is not upstream.
>
> I intend to create a new branch, named: valleyisland-io-3.0. The old version
> feature branch (valleyisland-io-1.0 and valleyisland-io-2.0) shall be removed
> once everything has lined up accordingly.
>
> Sorry that the valleyisland-io-2.0 was created and not
> used until now. For future backport commits, we will target to merge in
> standard/base instead of putting them in feature branch.
>
> Please review and if no further comments, please help to put this patches
> into new branch: valleyisland-io-3.0. Sorry for any incovenient caused.

These look ok to me, and no worries about the 2.0 feature branch. I've
pushed this change to the repositories now, in a 3.0 branch.

Make sure you are up to date with yocto/oe-core master, since the tools
have been updated and can now handle the valleyisland-io-3.0 branch
being the same as standard/base (i.e. no reset of the content).

Cheers,

Bruce

>
> Thanks in advance.
>
> Rebecca
>
> The following changes since commit aa677a2d02677ec92d59a8c36d001cf2f5cf3260:
>
>    usb/core: fix merge issue (2014-06-16 12:24:47 -0400)
>
> are available in the git repository at:
>
>    git://git.yoctoproject.org/linux-yocto-contrib rebeccas/rebase-feature-branch
>    http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebeccas/rebase-feature-branch
>
> Chang Rebecca Swee Fun (1):
>    x86/byt: enable board file for Baytrail LPSS PCI mode
>
> Chew, Chiau Ee (1):
>    x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS
>
> Chew, Kean Ho (4):
>    pinctrl-baytrail: add function mux checking in gpio pin request
>    pinctrl-baytrail: unmap interrupt when free the gpio pin
>    pinctrl-baytrail: enable platform device in the absent of ACPI
>      enumeration
>    pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI
>      system
>
>   arch/x86/Kconfig                       |  11 ++-
>   arch/x86/platform/Makefile             |   3 +
>   arch/x86/platform/byt/Makefile         |   1 +
>   arch/x86/platform/byt/byt-board.c      |  92 +++++++++++++++++++
>   drivers/pinctrl/Kconfig                |  19 +++-
>   drivers/pinctrl/Makefile               |   1 +
>   drivers/pinctrl/pinctrl-baytrail-dev.c | 159 +++++++++++++++++++++++++++++++++
>   drivers/pinctrl/pinctrl-baytrail.c     | 101 +++++++++++++++++++--
>   include/linux/pinctrl/pinctrl-byt.h    |  16 ++++
>   9 files changed, 393 insertions(+), 10 deletions(-)
>   create mode 100644 arch/x86/platform/byt/Makefile
>   create mode 100644 arch/x86/platform/byt/byt-board.c
>   create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c
>   create mode 100644 include/linux/pinctrl/pinctrl-byt.h
>