[linux-yocto] [PATCH 00/24] [linux-yocto-3.10] [Scenerio 1] Enable feature branch for Valley Island features
Chang, Rebecca Swee Fun
rebecca.swee.fun.chang at intel.com
Thu May 22 19:56:56 PDT 2014
Hi Bruce,
I have run a build test on the latest commits checked-in. The feature branch was not merge in during build time. I think that the feature branch should be branching out from commit 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee:minnowboard-keys: Bind MinnowBoard buttons to arrow keys instead of the HEAD of standard/base.
As per my observation during my implementation of feature branch, the feature branch should always branch out from an older version of standard/base, not the HEAD.
Can you please help to rebase the feature branch? The feature branch should look exactly like the branch that I've pushed to the contrib.
Thank you.
Rebecca
> -----Original Message-----
> From: Bruce Ashfield [mailto:bruce.ashfield at windriver.com]
> Sent: 23 May, 2014 10:20 AM
> To: Chang, Rebecca Swee Fun; linux-yocto at yoctoproject.org
> Subject: Re: [linux-yocto] [PATCH 00/24] [linux-yocto-3.10] [Scenerio 1]
> Enable feature branch for Valley Island features
>
> On 2014-05-22, 6:09 AM, rebecca.swee.fun.chang at intel.com wrote:
> > From: Chang Rebecca Swee Fun <rebecca.swee.fun.chang at intel.com>
> >
> > Hi all,
> >
> > This is the scenerio 1 that Boon Leong mentioned in the Feature Branch
> > planning email thread. This will be the feature branch that consists
> > of all patches that are queuing into 3.10 LTS/LTSI and also the so
> > called "staging patches".
> >
> > Whenever the LTS/LTSI patches got merged into standard/base in future,
> > that will break this feature branch. I will be rebase this feature
> > branch to fix build breakage.
> >
> > This feature branch was implemented locally and built tested. Feature
> > branch was able to merge with standard/base and built successfully. I
> > have also run some sanity test to check the drivers condition. All
> > tests are done on Bayley Bay CRB and Bakersport CRB. Valley Island Dev Kit
> was boot tested.
> >
> > If this is the scenerio that you are looking for, please help to
> > create a new feature branch named: valleyisland-io-1.0 in linux-yocto-3.10.
>
> I've gone with this option. I created a new branch called "valleyisland-io-1.0"
> from the latest standard/base and applied this patch series.
>
> The new content is now pushed to the repos.
>
> Let me know if you see anything wrong with the merge.
>
> Bruce
>
> >
> > Thanks.
> > Rebecca
> >
> > The following changes since commit
> 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee:
> >
> > minnowboard-keys: Bind MinnowBoard buttons to arrow keys
> > (2014-02-12 00:08:25 -0500)
> >
> > are available in the git repository at:
> >
> > git://git.yoctoproject.org/linux-yocto-contrib rebeccas/valleyisland-io-
> features-branch
> >
> > http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebecc
> > as/valleyisland-io-features-branch
> >
> > Adrian Hunter (1):
> > mmc: sdhci: Allow for irq being shared
> >
> > Alan Stern (1):
> > usb: gadget: don't fail when DMA isn't present
> >
> > Chang Rebecca Swee Fun (1):
> > x86/byt: enable board file for Baytrail LPSS PCI mode
> >
> > Chew, Chiau Ee (8):
> > x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS
> > serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate
> > spi/pxa2xx-pci: Add support for Intel BYT SPI
> > spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds
> > dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.
> > i2c: designware-pci: add 10-bit addressing mode functionality for BYT
> > I2C
> > i2c: designware-pci: set ideal HCNT, LCNT and SDA hold time value
> > ACPI / LPSS: Add Intel BayTrail ACPI mode PWM
> >
> > Chew, Kean Ho (4):
> > pinctrl-baytrail: add function mux checking in gpio pin request
> > pinctrl-baytrail: unmap interrupt when free the gpio pin
> > pinctrl-baytrail: enable platform device in the absent of ACPI
> > enumeration
> > pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI
> > system
> >
> > Chew, Kean ho (1):
> > i2c: i801: enable Intel BayTrail SMBUS
> >
> > Felipe Balbi (1):
> > usb: gadget: udc-core: move sysfs_notify() to a workqueue
> >
> > H Hartley Sweeten (1):
> > pwm: Add sysfs interface
> >
> > Heikki Krogerus (2):
> > serial: 8250: don't change the fifo trigger level when using dma
> > serial: 8250_pci: add support for Intel BayTrail
> >
> > James Ralston (1):
> > i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH
> >
> > Mika Westerberg (2):
> > i2c: designware-pci: Add Baytrail PCI IDs
> > pwm: add support for Intel Low Power Subsystem PWM
> >
> > Seth Heasley (1):
> > i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs
> >
> > Documentation/ABI/testing/sysfs-class-pwm | 79 +++++++
> > Documentation/i2c/busses/i2c-i801 | 3 +
> > Documentation/pwm.txt | 37 +++
> > arch/x86/Kconfig | 11 +-
> > arch/x86/platform/Makefile | 3 +
> > arch/x86/platform/byt/Makefile | 1 +
> > arch/x86/platform/byt/byt-board.c | 84 +++++++
> > drivers/acpi/acpi_lpss.c | 11 +
> > drivers/dma/dw/pci.c | 33 +++
> > drivers/i2c/busses/Kconfig | 3 +
> > drivers/i2c/busses/i2c-designware-pcidrv.c | 66 +++++-
> > drivers/i2c/busses/i2c-i801.c | 9 +
> > drivers/mmc/host/sdhci.c | 4 +-
> > drivers/pinctrl/Kconfig | 19 +-
> > drivers/pinctrl/Makefile | 1 +
> > drivers/pinctrl/pinctrl-baytrail-dev.c | 159 +++++++++++++
> > drivers/pinctrl/pinctrl-baytrail.c | 101 ++++++++-
> > drivers/pwm/Kconfig | 14 ++
> > drivers/pwm/Makefile | 2 +
> > drivers/pwm/core.c | 25 +-
> > drivers/pwm/pwm-lpss.c | 183 +++++++++++++++
> > drivers/pwm/sysfs.c | 352
> +++++++++++++++++++++++++++++
> > drivers/spi/Kconfig | 5 +-
> > drivers/spi/spi-pxa2xx-dma.c | 2 +-
> > drivers/spi/spi-pxa2xx-pci.c | 85 +++++--
> > drivers/tty/serial/8250/8250_core.c | 2 +-
> > drivers/tty/serial/8250/8250_dw.c | 43 ++++
> > drivers/tty/serial/8250/8250_pci.c | 145 ++++++++++++
> > drivers/usb/gadget/udc-core.c | 18 +-
> > include/linux/pinctrl/pinctrl-byt.h | 16 ++
> > include/linux/pwm.h | 29 ++-
> > include/linux/usb/gadget.h | 4 +
> > 32 files changed, 1506 insertions(+), 43 deletions(-)
> > create mode 100644 Documentation/ABI/testing/sysfs-class-pwm
> > create mode 100644 arch/x86/platform/byt/Makefile
> > create mode 100644 arch/x86/platform/byt/byt-board.c
> > create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c
> > create mode 100644 drivers/pwm/pwm-lpss.c
> > create mode 100644 drivers/pwm/sysfs.c
> > create mode 100644 include/linux/pinctrl/pinctrl-byt.h
> >
More information about the linux-yocto
mailing list