[linux-yocto] [PATCH 00/24] [linux-yocto-3.10] [Scenerio 1] Enable feature branch for Valley Island features

[rebecca.swee.fun.chang at intel.com]

From: Chang Rebecca Swee Fun <rebecca.swee.fun.chang at intel.com>

Hi all,

This is the scenerio 1 that Boon Leong mentioned in the Feature Branch
planning email thread. This will be the feature branch that consists
of all patches that are queuing into 3.10 LTS/LTSI and also the so
called "staging patches".

Whenever the LTS/LTSI patches got merged into standard/base in future,
that will break this feature branch. I will be rebase this feature branch
to fix build breakage.

This feature branch was implemented locally and built tested. Feature branch
was able to merge with standard/base and built successfully. I have also run
some sanity test to check the drivers condition. All tests are done on
Bayley Bay CRB and Bakersport CRB. Valley Island Dev Kit was boot tested.

If this is the scenerio that you are looking for, please help to create
a new feature branch named: valleyisland-io-1.0 in linux-yocto-3.10.

Thanks.
Rebecca

The following changes since commit 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee:

  minnowboard-keys: Bind MinnowBoard buttons to arrow keys (2014-02-12 00:08:25 -0500)

are available in the git repository at:

  git://git.yoctoproject.org/linux-yocto-contrib rebeccas/valleyisland-io-features-branch
  http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebeccas/valleyisland-io-features-branch

Adrian Hunter (1):
  mmc: sdhci: Allow for irq being shared

Alan Stern (1):
  usb: gadget: don't fail when DMA isn't present

Chang Rebecca Swee Fun (1):
  x86/byt: enable board file for Baytrail LPSS PCI mode

Chew, Chiau Ee (8):
  x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS
  serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate
  spi/pxa2xx-pci: Add support for Intel BYT SPI
  spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds
  dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.
  i2c: designware-pci: add 10-bit addressing mode functionality for BYT
    I2C
  i2c: designware-pci: set ideal HCNT, LCNT and SDA hold time value
  ACPI / LPSS: Add Intel BayTrail ACPI mode PWM

Chew, Kean Ho (4):
  pinctrl-baytrail: add function mux checking in gpio pin request
  pinctrl-baytrail: unmap interrupt when free the gpio pin
  pinctrl-baytrail: enable platform device in the absent of ACPI
    enumeration
  pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI
    system

Chew, Kean ho (1):
  i2c: i801: enable Intel BayTrail SMBUS

Felipe Balbi (1):
  usb: gadget: udc-core: move sysfs_notify() to a workqueue

H Hartley Sweeten (1):
  pwm: Add sysfs interface

Heikki Krogerus (2):
  serial: 8250: don't change the fifo trigger level when using dma
  serial: 8250_pci: add support for Intel BayTrail

James Ralston (1):
  i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH

Mika Westerberg (2):
  i2c: designware-pci: Add Baytrail PCI IDs
  pwm: add support for Intel Low Power Subsystem PWM

Seth Heasley (1):
  i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs

 Documentation/ABI/testing/sysfs-class-pwm  |  79 +++++++
 Documentation/i2c/busses/i2c-i801          |   3 +
 Documentation/pwm.txt                      |  37 +++
 arch/x86/Kconfig                           |  11 +-
 arch/x86/platform/Makefile                 |   3 +
 arch/x86/platform/byt/Makefile             |   1 +
 arch/x86/platform/byt/byt-board.c          |  84 +++++++
 drivers/acpi/acpi_lpss.c                   |  11 +
 drivers/dma/dw/pci.c                       |  33 +++
 drivers/i2c/busses/Kconfig                 |   3 +
 drivers/i2c/busses/i2c-designware-pcidrv.c |  66 +++++-
 drivers/i2c/busses/i2c-i801.c              |   9 +
 drivers/mmc/host/sdhci.c                   |   4 +-
 drivers/pinctrl/Kconfig                    |  19 +-
 drivers/pinctrl/Makefile                   |   1 +
 drivers/pinctrl/pinctrl-baytrail-dev.c     | 159 +++++++++++++
 drivers/pinctrl/pinctrl-baytrail.c         | 101 ++++++++-
 drivers/pwm/Kconfig                        |  14 ++
 drivers/pwm/Makefile                       |   2 +
 drivers/pwm/core.c                         |  25 +-
 drivers/pwm/pwm-lpss.c                     | 183 +++++++++++++++
 drivers/pwm/sysfs.c                        | 352 +++++++++++++++++++++++++++++
 drivers/spi/Kconfig                        |   5 +-
 drivers/spi/spi-pxa2xx-dma.c               |   2 +-
 drivers/spi/spi-pxa2xx-pci.c               |  85 +++++--
 drivers/tty/serial/8250/8250_core.c        |   2 +-
 drivers/tty/serial/8250/8250_dw.c          |  43 ++++
 drivers/tty/serial/8250/8250_pci.c         | 145 ++++++++++++
 drivers/usb/gadget/udc-core.c              |  18 +-
 include/linux/pinctrl/pinctrl-byt.h        |  16 ++
 include/linux/pwm.h                        |  29 ++-
 include/linux/usb/gadget.h                 |   4 +
 32 files changed, 1506 insertions(+), 43 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-class-pwm
 create mode 100644 arch/x86/platform/byt/Makefile
 create mode 100644 arch/x86/platform/byt/byt-board.c
 create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c
 create mode 100644 drivers/pwm/pwm-lpss.c
 create mode 100644 drivers/pwm/sysfs.c
 create mode 100644 include/linux/pinctrl/pinctrl-byt.h

-- 
1.9.1