[linux-yocto] [PATCH 03/28] LSI AXM55xx rapidio? Fixed offset of RAB_OBDSE_XX registers

[Charlie Paul]

From: ningligong <ning.li at lsi.com>

The register base for the RAB was wrong changed from
0x10 to 0xC

Added the IB_VIRT stats SLEEPING and TRAN_PENDING

Signed-off-by: ningligong <ning.li at lsi.com>
---
 drivers/rapidio/devices/lsi/axxia-rio-ds.h |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/rapidio/devices/lsi/axxia-rio-ds.h b/drivers/rapidio/devices/lsi/axxia-rio-ds.h
index 5c0d263..25633c0 100755
--- a/drivers/rapidio/devices/lsi/axxia-rio-ds.h
+++ b/drivers/rapidio/devices/lsi/axxia-rio-ds.h
@@ -73,9 +73,9 @@
 #define IB_VSID_M_PREFETCH_ENABLE		(2)
 #define IB_VSID_M_PREFETCH_WAKEUP		(4)
 
-#define RAB_OBDSE_CTRL(n)            (RAB_REG_BASE + (0x2d28 + (0x10*(n))))
-#define RAB_OBDSE_STAT(n)            (RAB_REG_BASE + (0x2d28 + (0x10*(n)))+0x4)
-#define RAB_OBDSE_DESC_ADDR(n)       (RAB_REG_BASE + (0x2d28 + (0x10*(n)))+0x8)
+#define RAB_OBDSE_CTRL(n)            (RAB_REG_BASE + (0x2d28 + (0xC*(n))))
+#define RAB_OBDSE_STAT(n)            (RAB_REG_BASE + (0x2d28 + (0xC*(n)))+0x4)
+#define RAB_OBDSE_DESC_ADDR(n)       (RAB_REG_BASE + (0x2d28 + (0xC*(n)))+0x8)
 
 #define RAB_IBVIRT_M_STAT(n)         (RAB_REG_BASE + (0x2ef0 + (0x4*(n))))
 
@@ -95,6 +95,8 @@
 
 /* stats */
 #define IB_VIRT_M_STAT_ERROR_MASK           0x3FC
+#define IB_VIRT_M_STAT_SLEEPING			(1<<11)
+#define IB_VIRT_M_STAT_TRAN_PENDING		(1<<10)
 #define IB_VIRT_M_STAT_PDU_DROPPED	    (1 << 9)
 #define IB_VIRT_M_STAT_SEG_LOSS		    (1 << 8)
 #define IB_VIRT_M_STAT_MTU_LEN_MIS_ERR	    (1 << 7)
@@ -242,6 +244,8 @@ struct ibds_virt_m_cfg {
 	u32			num_hw_written_bufs;
 
 	u32			alias_reg_value;
+	u16			virt_vsid;
+	u16			num_data_streams;
 
 };
 
-- 
1.7.9.5