[linux-yocto] [PATCH 20/30] LSI AXM55XX: Add PMU support
Charlie Paul
cpaul.windriver at gmail.com
Thu May 1 08:29:42 PDT 2014
From: David Mercado <david.mercado at windriver.com>
This patch adds PMU support to the Axxia AXM55xx platform. Note that
on this platform, all PMU IRQ lines are OR'ed together into a single
IRQ, and therefore, this implementation uses a rotating IRQ affinity
scheme to deal with it.
Signed-off-by: David Mercado <david.mercado at windriver.com>
---
arch/arm/kernel/perf_event_v7.c | 3 +-
arch/arm/mach-axxia/axxia-gic.c | 25 ++++++++++++--
arch/arm/mach-axxia/axxia.c | 55 +++++++++++++++++++++++++++++++
arch/arm/mach-axxia/include/mach/irqs.h | 1 +
4 files changed, 81 insertions(+), 3 deletions(-)
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 7deaa7f..ae7d9d8 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -95,6 +95,7 @@ enum armv7_a5_perf_types {
/* ARMv7 Cortex-A15 specific event types */
enum armv7_a15_perf_types {
+ ARMV7_A15_PERFCTR_CPU_CYCLES = 0x11,
ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ = 0x40,
ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE = 0x41,
ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ = 0x42,
@@ -489,7 +490,7 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
* Cortex-A15 HW events mapping
*/
static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_A15_PERFCTR_CPU_CYCLES,
[PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
[PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS,
[PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL,
diff --git a/arch/arm/mach-axxia/axxia-gic.c b/arch/arm/mach-axxia/axxia-gic.c
index e5ad304..8a8e8eb 100644
--- a/arch/arm/mach-axxia/axxia-gic.c
+++ b/arch/arm/mach-axxia/axxia-gic.c
@@ -283,6 +283,10 @@ static void gic_mask_irq(struct irq_data *d)
if ((irqid >= IPI0_CPU0) && (irqid < MAX_AXM_IPI_NUM))
return;
+ /* Don't mess with the PMU IRQ either. */
+ if (irqid == IRQ_PMU)
+ return;
+
/* Deal with PPI interrupts directly. */
if ((irqid > 16) && (irqid < 32)) {
_gic_mask_irq(d);
@@ -327,6 +331,10 @@ static void gic_unmask_irq(struct irq_data *d)
if ((irqid >= IPI0_CPU0) && (irqid < MAX_AXM_IPI_NUM))
return;
+ /* Don't mess with the PMU IRQ either. */
+ if (irqid == IRQ_PMU)
+ return;
+
/* Deal with PPI interrupts directly. */
if ((irqid > 15) && (irqid < 32)) {
_gic_unmask_irq(d);
@@ -565,8 +573,8 @@ static int gic_set_affinity(struct irq_data *d,
* different than the prior cluster, remove the IRQ affinity
* on the old cluster.
*/
- if ((cpu_logical_map(cpu) / CORES_PER_CLUSTER) !=
- (irq_cpuid[irqid] / CORES_PER_CLUSTER)) {
+ if ((irqid != IRQ_PMU) && ((cpu_logical_map(cpu) / CORES_PER_CLUSTER) !=
+ (irq_cpuid[irqid] / CORES_PER_CLUSTER))) {
/*
* If old cpu assignment falls within the same cluster as
* the cpu we're currently running on, set the IRQ affinity
@@ -775,6 +783,11 @@ static void __cpuinit gic_dist_init(struct gic_chip_data *gic)
}
/*
+ * Set the PMU IRQ to the first cpu in this cluster.
+ */
+ writeb_relaxed(0x01, base + GIC_DIST_TARGET + IRQ_PMU);
+
+ /*
* Set Axxia IPI interrupts to be edge triggered.
*/
for (i = IPI0_CPU0; i < MAX_AXM_IPI_NUM; i++) {
@@ -797,6 +810,14 @@ static void __cpuinit gic_dist_init(struct gic_chip_data *gic)
base + GIC_DIST_ENABLE_SET + enableoff);
}
+ /*
+ * Do the initial enable of the PMU IRQ here.
+ */
+ enablemask = 1 << (IRQ_PMU % 32);
+ enableoff = (IRQ_PMU / 32) * 4;
+ writel_relaxed(enablemask,
+ base + GIC_DIST_ENABLE_SET + enableoff);
+
writel_relaxed(1, base + GIC_DIST_CTRL);
}
diff --git a/arch/arm/mach-axxia/axxia.c b/arch/arm/mach-axxia/axxia.c
index 0e368a4..1c1f20e 100644
--- a/arch/arm/mach-axxia/axxia.c
+++ b/arch/arm/mach-axxia/axxia.c
@@ -46,6 +46,7 @@
#include <asm/mach/time.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
+#include <asm/pmu.h>
#include <mach/hardware.h>
#include <mach/timers.h>
#include <mach/axxia-gic.h>
@@ -178,6 +179,58 @@ static struct of_dev_auxdata axxia_auxdata_lookup[] __initdata = {
{}
};
+static struct resource axxia_pmu_resources[] = {
+ [0] = {
+ .start = IRQ_PMU,
+ .end = IRQ_PMU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*
+ * The PMU IRQ lines of four cores are wired together into a single interrupt.
+ * Bounce the interrupt to other cores if it's not ours.
+ */
+#define CORES_PER_CLUSTER 4
+static irqreturn_t axxia_pmu_handler(int irq, void *dev, irq_handler_t handler)
+{
+ irqreturn_t ret = handler(irq, dev);
+ int cpu = smp_processor_id();
+ int cluster = cpu / CORES_PER_CLUSTER;
+ int other;
+
+ if (ret == IRQ_NONE) {
+
+ /* Look until we find another cpu that's online. */
+ do {
+ other = (++cpu % CORES_PER_CLUSTER) +
+ (cluster * CORES_PER_CLUSTER);
+ } while (!cpu_online(other));
+
+ irq_set_affinity(irq, cpumask_of(other));
+ }
+
+ /*
+ * We should be able to get away with the amount of IRQ_NONEs we give,
+ * while still having the spurious IRQ detection code kick in if the
+ * interrupt really starts hitting spuriously.
+ */
+ return ret;
+}
+
+static struct arm_pmu_platdata axxia_pmu_platdata = {
+ .handle_irq = axxia_pmu_handler,
+};
+
+
+static struct platform_device pmu_device = {
+ .name = "arm-pmu",
+ .id = ARM_PMU_DEVICE_CPU,
+ .num_resources = ARRAY_SIZE(axxia_pmu_resources),
+ .resource = axxia_pmu_resources,
+ .dev.platform_data = &axxia_pmu_platdata,
+};
+
static inline void
spidev_chip_select(u32 control, unsigned n)
{
@@ -291,6 +344,8 @@ void __init axxia_dt_init(void)
axxia_pcie_init();
axxia_ddr_retention_init();
+
+ platform_device_register(&pmu_device);
}
static void axxia_restart(char str, const char *cmd)
diff --git a/arch/arm/mach-axxia/include/mach/irqs.h b/arch/arm/mach-axxia/include/mach/irqs.h
index 5f25c95..d0ddc8b 100644
--- a/arch/arm/mach-axxia/include/mach/irqs.h
+++ b/arch/arm/mach-axxia/include/mach/irqs.h
@@ -1,4 +1,5 @@
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
+#define IRQ_PMU 222
#define AXXIA_MSI_FIRST 224
#define NR_IRQS 256
--
1.7.9.5
More information about the linux-yocto
mailing list