[linux-yocto] [PATCH 00/22] linux-yocto-3.8 meta: valleyisland-io feature patch for Intel BayTrail
Kamble, Nitin A
nitin.a.kamble at intel.com
Wed Jan 29 09:05:17 PST 2014
On 1/29/2014 10:41 AM, boon.leong.ong at intel.com wrote:
> From: Ong Boon Leong <boon.leong.ong at intel.com>
>
> Dear all,
>
> The following patchset has been reviewed internally by Intel
> Yocto developer and is found fit for larger community review.
>
> Introduction of the patchset
> ============================
>
> This the feature patch series that were generated to enable
> out-of-tree valleyisland platform IO such as follow:
> 1) PWM driver for Intel BayTrail
> 2) SMBus driver for Intel BayTrail
> 4) Enabling PCI enumeration in I/O drivers - dmaengine, i2c, spi.
>
> The feature patch will be used by meta/cfg/kernel-cache/bsp/valleyisland.
>
> The following patches are meant to enable valleyisland feature patch
> and its associated scc & cfg files:
> 90b55e9 meta: add features/valleyisland-io
> a1844e6 meta: valleyisland bsp scc files update
> 996201a meta: update valleyisland bsp config file
>
> There is a total of 19 patches for above out-of-tree changes:
> 9c33ec1 valleyisland-io: spi/pxa2xx-pci: Enable DMA support for PCI SPI-PXA2XX
> c16c0a6 valleyisland-io: spi/pxa2xx-pci: Add support for Intel BYT SPI
> 61fe900 valleyisland-io: Force BYT SDCARD host to run with SDR25
> 5da0d68 valleyisland-io: fix SD card stuck in runtime suspend
> a3f57eb5 valleyisland-io: enable SMBus for Intel BayTrail
> e4d1561 valleyisland-io: enable board file for BYT LPSS PCI mode
> aae1ce8 valleyisland-io: add PCI dependency for LPSS config
> 3e12515 valleyisland-io: i2c: preset values for HCNT, LCNT and SDA
> ea21740 valleyisland-io: declare the 10-bit address support in I2C
> bee7ac9 valleyisland-io: designware-pci support for Intel BayTrail
> 9a437a4 valleyisland-io: add PCI support in dw_dmac_pci.c
> 2d24854 valleyisland-io: add ACPI mode for Intel BayTrail PWM
> 3a87802 valleyisland-io: improve the base calculation in pwm
> b951d34 valleyisland-io: Enable PCI mode for Intel BayTrail PWM
> c2df0b0 valleyisland-io: support PWM in Intel LPSS subsystem
> 44fb111 valleyisland-io: custom baud rate in serial 8250 driver
> aa71c37 valleyisland-io: fix DMA tranfer issue in ACPI mode
> 9e42f97 valleyisland-io: spi/pxa2xx-pci: convert to generic pci glue layer
> 93ddcd0 valleyisland-io: enable/disable ulpi phy refclk in usb
>
> We have build tested (allyesconfig & allmodconfig) this patchset with:
> + linux-yocto v3.4 standard/base, standard/common-pc/base
> and standard/common-pc-64/base branch that has been applied with
> 338 patches. Please refer to email titled
> "linux-yocto-3_8 standard base: upstream commits series to enable
> Valley Island BSP"
> + meta-valleyisland BSP which will be published subsequently.
>
> The core-image-sato hddimg generated from the above ingredients
> have been tested on Intel BayTrail platform (Valleyisland) and
> result is healthy.
>
> Also, thanks to Darren Hart & Nitin A Kamble for helping in
> build-testing this feature patch for genericx86 BSP too.
>
> If the community thinks that the patchset is fit,
> please pull this patchset into linux-yocto_3.8 meta branch.
>
>
> Sincerely,
>
> Ong Boon Leong
> Chew Chiau Ee
> Rebecca Chang Swee Fun
> Intel Corp
> The following changes since commit 86ecf2aa891fd60da3b0986a678733bbd44e47f3:
>
> valleyisland: remove pending io patches (2013-12-16 14:34:12 -0500)
>
> are available in the git repository at:
>
> git://git.yoctoproject.org/linux-yocto-contrib boonleong/meta-baytrail-final
> http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=boonleong/meta-baytrail-final
Reviewed-By: Nitin A Kamble <nitin.a.kamble at intel.com>
> Ong Boon Leong (19):
> valleyisland-io: enable/disable ulpi phy refclk in usb
> valleyisland-io: spi/pxa2xx-pci: convert to generic pci glue layer
> valleyisland-io: fix DMA tranfer issue in ACPI mode
> valleyisland-io: custom baud rate in serial 8250 driver
> valleyisland-io: support PWM in Intel LPSS subsystem
> valleyisland-io: Enable PCI mode for Intel BayTrail PWM
> valleyisland-io: improve the base calculation in pwm
> valleyisland-io: add ACPI mode for Intel BayTrail PWM
> valleyisland-io: add PCI support in dw_dmac_pci.c
> valleyisland-io: designware-pci support for Intel BayTrail
> valleyisland-io: declare the 10-bit address support in I2C
> valleyisland-io: i2c: preset values for HCNT, LCNT and SDA
> valleyisland-io: add PCI dependency for LPSS config
> valleyisland-io: enable board file for BYT LPSS PCI mode
> valleyisland-io: enable SMBus for Intel BayTrail
> valleyisland-io: fix SD card stuck in runtime suspend
> valleyisland-io: Force BYT SDCARD host to run with SDR25
> valleyisland-io: spi/pxa2xx-pci: Add support for Intel BYT SPI
> valleyisland-io: spi/pxa2xx-pci: Enable DMA support for PCI
> SPI-PXA2XX
>
> Ong, Boon Leong (3):
> meta: update valleyisland bsp config file
> meta: valleyisland bsp scc files update
> meta: add features/valleyisland-io
>
> .../kernel-cache/bsp/valleyisland/valleyisland.cfg | 15
> .../kernel-cache/bsp/valleyisland/valleyisland.scc | 2 -
> .../bsp/valleyisland/valleyisland32.scc | 2 -
> ...b-dwc3-pci-Enable-disable-ulpi-phy-refclk.patch | 73 +++++
> ...2xx-pci-convert-to-generic-pci-glue-layer.patch | 127 ++++++++
> ...Fix-BYT-ACPI-mode-SPI-DMA-transfer-failur.patch | 68 ++++
> ...-Add-custom-baud-rate-support-for-BYT-ACP.patch | 114 +++++++
> ...support-for-Intel-Low-Power-Subsystem-PWM.patch | 245 ++++++++++++++
> .../0006-pwm-lpss-Enable-BYT-PCI-mode-PWM.patch | 344 ++++++++++++++++++++
> .../0007-pwm-lpss-Fix-base_unit-calculation.patch | 91 ++++++
> .../0008-ACPI-LPSS-Add-BYT-ACPI-mode-PWM.patch | 45 +++
> ...engine-dw_dmac-add-PCI-part-of-the-driver.patch | 198 +++++++++++
> ...are-pci-Add-support-for-Intel-BayTrail-LP.patch | 125 +++++++
> ...are-pcidrv-Add-10-bit-addressing-mode-fun.patch | 114 +++++++
> ...are-pcidrv-Option-to-set-custom-HCNT-LCNT.patch | 139 ++++++++
> ...-add-PCI-dependency-for-CONFIG_X86_INTEL_.patch | 30 ++
> ...t-enable-board-file-for-BYT-LPSS-PCI-mode.patch | 156 +++++++++
> .../0015-i2c-i801-Enable-BYT-SMBUS-support.patch | 35 ++
> ...-sdhci-pci-Fix-BYT-sd-card-getting-stuck-.patch | 81 +++++
> ...orce-BYT-SDCARD-host-to-run-with-SDR25-mo.patch | 78 +++++
> ...-pxa2xx-pci-Add-support-for-Intel-BYT-SPI.patch | 52 +++
> ...pci-Enable-DMA-support-for-PCI-SPI-PXA2XX.patch | 66 ++++
> .../features/valleyisland-io/valleyisland-io.cfg | 32 ++
> .../features/valleyisland-io/valleyisland-io.scc | 22 ++
> 24 files changed, 2250 insertions(+), 4 deletions(-)
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0001-usb-dwc3-pci-Enable-disable-ulpi-phy-refclk.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0002-spi-pxa2xx-pci-convert-to-generic-pci-glue-layer.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0003-spi-pxa2xx-Fix-BYT-ACPI-mode-SPI-DMA-transfer-failur.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0004-serial-8250-Add-custom-baud-rate-support-for-BYT-ACP.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0005-pwm-add-support-for-Intel-Low-Power-Subsystem-PWM.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0006-pwm-lpss-Enable-BYT-PCI-mode-PWM.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0007-pwm-lpss-Fix-base_unit-calculation.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0008-ACPI-LPSS-Add-BYT-ACPI-mode-PWM.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0009-dmaengine-dw_dmac-add-PCI-part-of-the-driver.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0010-i2c-designware-pci-Add-support-for-Intel-BayTrail-LP.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0011-i2c-designware-pcidrv-Add-10-bit-addressing-mode-fun.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0012-i2c-designware-pcidrv-Option-to-set-custom-HCNT-LCNT.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0013-x86-Kconfig-add-PCI-dependency-for-CONFIG_X86_INTEL_.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0014-x86-byt-enable-board-file-for-BYT-LPSS-PCI-mode.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0015-i2c-i801-Enable-BYT-SMBUS-support.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0016-PENDING-mmc-sdhci-pci-Fix-BYT-sd-card-getting-stuck-.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0017-mmc-sdhci-Force-BYT-SDCARD-host-to-run-with-SDR25-mo.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0018-spi-pxa2xx-pci-Add-support-for-Intel-BYT-SPI.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/0019-spi-pxa2xx-pci-Enable-DMA-support-for-PCI-SPI-PXA2XX.patch
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/valleyisland-io.cfg
> create mode 100644 meta/cfg/kernel-cache/features/valleyisland-io/valleyisland-io.scc
>
More information about the linux-yocto
mailing list