[linux-yocto] [PATCH 03/18] arch/powerpc: Checking in correct USB entries to ACP3421 DTS

[Charlie Paul]

From: SangeethaRao <sangeetha.rao at lsi.com>

The latest USB driver in 3.10 Yocto expects more information from DTS 
than what existed in ACP3421 DTS. The ACP3421 DTS was updated with
the extra information based on LSI hardware configurations. 

Signed-off-by: SangeethaRao <sangeetha.rao at lsi.com>
---
 arch/powerpc/boot/dts/acp342x.dts |   33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/boot/dts/acp342x.dts b/arch/powerpc/boot/dts/acp342x.dts
index b851788..f5cf3a6 100644
--- a/arch/powerpc/boot/dts/acp342x.dts
+++ b/arch/powerpc/boot/dts/acp342x.dts
@@ -90,64 +90,65 @@
                         clock-frequency = <0>; // Filled in by zImage
                         UART0: serial at 00404000 {
                                 device_type = "serial";
-                                compatible = "acp-uart0";
+                                compatible = "lsi,acp-uart0";
                                 enabled = <1>;
                                 reg = <0x00404000 0x1000>;
                                 clock-reg = <0x00408040 0x20>;
                                 clock-frequency = <0xbebc200>;
                                 current-speed = <9600>;
                                 interrupt-parent = <&MPIC>;
-                                interrupts = <22 4>;
+                                interrupts = <22>;
                         };
                         UART1: serial at 00405000 {
                                 device_type = "serial";
-                                compatible = "acp-uart1";
+                                compatible = "lsi,acp-uart1";
                                 enabled = <0>;
                                 reg = <0x00405000 0x1000>;
                                 clock-reg = <0x00408060 0x20>;
                                 clock-frequency = <200000000>;
                                 current-speed = <9600>;
                                 interrupt-parent = <&MPIC>;
-                                interrupts = <23 4>;
+                                interrupts = <23>;
                         };
                         USB0: usb at 004a4000 {
                                 device_type = "usb";
-                                compatible = "acp-usb";
-                                enabled = <0>;
-                                reg = <0x004a4000 0x00020000>;
+                                compatible = "lsi,acp-usb";
+                                enabled = <1>;
+                                reg = <0x20 0x004A0000 0x0 0020000>,
+					<0x20 0x0040C000 0x0 0001000>;
                                 interrupt-parent = <&MPIC>;
-                                interrupts = <31 4>;
+                                interrupts = <31>;
                         };
                         I2C: i2c at 00403000 {
-                                compatible = "acp-i2c";
+                                compatible = "lsi,acp-i2c";
                                 enabled = <0>;
                                 reg = <0x00403000 0x00001000>;
                                 interrupt-parent = <&MPIC>;
-                                interrupts = <21 4>;
+                                interrupts = <21>;
                         };
                         SSP: ssp at 00402000 {
-                                compatible = "acp-ssp";
+                                compatible = "arm,acp-ssp";
                                 enabled = <0>;
                                 reg = <0x00402000 0x00001000>;
                                 interrupt-parent = <&MPIC>;
-                                interrupts = <20 4>;
+                                interrupts = <20>;
                         };
                         NAND: nand at 00440000 {
                                 device_type = "nand";
-                                compatible = "acp-nand";
+                                compatible = "lsi,acp-nand";
                                 enabled = <1>;
                                 reg = <0x00440000 0x20000
                                        0x0040c000 0x1000>;
                         };
                         FEMAC: femac at 00480000 {
                                 device_type = "network";
-                                compatible = "acp-femac";
+                                compatible = "lsi,acp-femac";
                                 enabled = <1>;
                                 reg = <0x00480000 0x1000
                                        0x00481000 0x1000
                                        0x00482000 0x1000>;
                                 interrupt-parent = <&MPIC>;
-                                interrupts = <33 4>;
+                                interrupts = <33>;
                                 mdio-reg = <0x00409000 0x1000>;
                                 // The following will get filled in by
                                 // the boot loader.
@@ -284,7 +285,7 @@
         };
 
         rio0: rapidio at f0020000 {
-                compatible = "acp,rapidio-delta";
+                compatible = "lsi,rapidio-delta";
                 device_type = "rapidio";
                 enabled = <0>;
                 #size = <0>;    /* 0 = (256, small system)
-- 
1.7.9.5