[linux-yocto] [PATCH 1/1] meta: remove CONFIG_BYT_LPSS_BRD from valleyisland cfg file

Darren Hart dvhart at linux.intel.com
Tue Feb 11 18:59:22 PST 2014


On 2/11/14, 18:53, "Chang, Rebecca Swee Fun"
<rebecca.swee.fun.chang at intel.com> wrote:

>No, it is only needed in PCI mode device enumeration.

Huh... I guess I need to go review what all was in that board file. I
thought there was some hardware description in there ACPI wasn't yet
capable of describing. So the ACPI driver is able to setup the SPI bus,
for example?

Thanks Rebecca,

Darren

>> -----Original Message-----
>> From: Darren Hart [mailto:dvhart at linux.intel.com]
>> Sent: 12 February, 2014 10:32 AM
>> To: Chang, Rebecca Swee Fun; linux-yocto at yoctoproject.org
>> Subject: Re: [linux-yocto] [PATCH 1/1] meta: remove
>> CONFIG_BYT_LPSS_BRD from valleyisland cfg file
>> 
>> On 2/11/14, 9:31, "rebecca.swee.fun.chang at intel.com"
>> <rebecca.swee.fun.chang at intel.com> wrote:
>> 
>> >From: "Chang, Rebecca Swee Fun" <rebecca.swee.fun.chang at intel.com>
>> >
>> >Remove CONFIG_BYT_LPSS_BRD from valleyisland.cfg file.
>> >CONFIG_BYT_LPSS_BRD is a duplicated config. It has been included in
>> >features/valleyisland-io/valleyisland-io-pci.
>> 
>> Is it only relevant for the PCI enumeration? Seems to me it would be
>>needed
>> for both PCI and ACPI until such time as ACPI Device Properties lands
>>in the
>> ACPI 6.0 specification... Yes/no?
>> 
>> --
>> Darren
>> 
>> >
>> >Signed-off-by: Chang, Rebecca Swee Fun
>> ><rebecca.swee.fun.chang at intel.com>
>> >---
>> > meta/cfg/kernel-cache/bsp/valleyisland/valleyisland.cfg |    1 -
>> > 1 file changed, 1 deletion(-)
>> >
>> >diff --git a/meta/cfg/kernel-cache/bsp/valleyisland/valleyisland.cfg
>> >b/meta/cfg/kernel-cache/bsp/valleyisland/valleyisland.cfg
>> >index 0e3a863..140a006 100644
>> >--- a/meta/cfg/kernel-cache/bsp/valleyisland/valleyisland.cfg
>> >+++ b/meta/cfg/kernel-cache/bsp/valleyisland/valleyisland.cfg
>> >@@ -1,6 +1,5 @@
>> > CONFIG_MCORE2=y
>> > CONFIG_X86_INTEL_LPSS=y
>> >-CONFIG_BYT_LPSS_BRD=y
>> > CONFIG_PRINTK=y
>> > CONFIG_PRINTK_TIME=y
>> >
>> >--
>> >1.7.10.4
>> >
>> >_______________________________________________
>> >linux-yocto mailing list
>> >linux-yocto at yoctoproject.org
>> >https://lists.yoctoproject.org/listinfo/linux-yocto
>> >
>> 
>> 
>
>





More information about the linux-yocto mailing list