[linux-yocto] [PATCH 00/78] updates to 3.4 standard/axxia/base
Paul Butler
butler.paul at gmail.com
Tue Nov 26 07:37:49 PST 2013
On Mon, Nov 25, 2013 at 03:03:47PM -0500, Bruce Ashfield wrote:
> On 13-11-19 11:22 PM, Paul Butler wrote:
> >This series replaces the previous xx/94 series.
> >I've removed the defconfig patches and the
> >meta branch cfg/scc patches will be coming soon.
> >Some of the patches may still contain some dead code,
> >but it is cleaned up in a later patch in the series.
> >Commit message improvements and other code touch-ups as suggested.
>
> It is also useful to do a overall diffstat in the 0/N message, so at
> a glance I can see if the series is straying outside of where it
> should touch within the kernel source tree.
>
> This looks better, but there was a comment on patch 19/78, with
> no response. Is the entire driver directory something we can
> drop in favour of the already in-tree variant ?
>
> Without the .scc/.cfg files I can't do my own builds, so I'll have
> to take your word that it isn't broken :)
>
> That being said, this looks pretty good for an initial merge, and
> then we need to work on updating this to newer kernels, and eventually
> a plan to get some parts into mainline. I just need an answer to the
> driver question and I'll proceed with some test merges.
>
> Cheers,
>
> Bruce
>
I have added the 2 new patches and also scrubbed more dead code.
The scrubbing of dead code propagated through several patches.
Sending a new pull-request. I think I have covered all the issues now.
-paul
The following changes since commit
9e65874ad3fa6efd7db2e18e91e7246954b60cc5:
Merge branch 'standard/base' into standard/axxia/base (2013-08-28
16:49:51 -0400)
are available in the git repository at:
https://github.com/butlerpaul/lsikernel.git standard/axxia/base
for you to fetch changes up to 14d45f528accd9e27be8543e67c544bda4cac56a:
drivers/i2c: removes obsolete driver (2013-11-26 08:34:01 -0600)
> >
> >----------------------------------------------------------------
> >
> >The following changes since commit 9e65874ad3fa6efd7db2e18e91e7246954b60cc5:
> >
> > Merge branch 'standard/base' into standard/axxia/base (2013-08-28 16:49:51 -0400)
> >
> >are available in the git repository at:
> >
> > https://github.com/butlerpaul/lsikernel.git standard/axxia/base
> >and
> > https://github.com/butlerpaul/lsikernel.git standard/preempt-rt/axxia/base
> >
> >for you to fetch changes up to d139ce041a2470e6c73dbfb48e977a30b28fd5f9:
> >
> > arm/mach-axxia: The offset was not being passed to __arm_ioremap_pfn! (2013-11-19 21:12:24 -0600)
> >
> >----------------------------------------------------------------
> >
> >Anders Berg (9):
> > drivers/dma: Corrected IRQ line mixup.
> > arm/dts: Added device tree nodes for I2C controllers.
> > drivers/i2c: New I2C bus driver
> > drivers/i2c: Corrected WAIT_TIMER timeout calculation.
> > drivers/i2c: Use 'bus' property from device tree.
> > usb: Enable dma transfers in ehci-ci13612
> > usb: Cleanup USB host controller driver ehci-ci13612
> > arm/mach-axxia: Added L3 cache init function
> > usb: ehci-ci13612: Halt controller before reset
> >
> >David Mercado (8):
> > LSI axm55xx: Add CPU Hotplug support
> > arch/powerpc: Fix PMU interrupts
> > arm/mach-axxia: Fix irq_set_type() in arch/arm/mach-axxia/axxia-gic.c
> > drivers/net/ethernet: add ACP wrapper support for LSI RTE into kernel
> > arm/mach-axxia: fix error with IRQ type setting at startup
> > drivers/net/ethernet: combined arm and powerpc FEMAC ethernet driver
> > arm/mach-axxia: filled in stub axxia_restart function
> > drivers: Fix Device Tree "compatible" fields
> >
> >Gary McGee (1):
> > arm/mach-axxia: support for Axxia DDR retention
> >
> >Jay Jayatheerthan (1):
> > drivers/net/ethernet: Fix clause 45 MDIO access.
> >
> >John Jacques (40):
> > arm/boot/dts: Change the timer interrupt numbers to match the new
> > simulator.
> > arch/powerpc: Release the lock when ncr_read() completes.
> > arch/powerpc: Aded wrappers for platform device
> > registration/deregistration.
> > powerpc/dts: Device tree files for the LSI boards.
> > arm: AXM5516 emulation bringup boot
> > arm: AXM5516 emulation bringup mach-axxia
> > drivers/tty: AXM5516 emulation bringup - amba-pl011.c
> > drivers/net: AXM5516 emulation bringup - lsi_acp_mdio.c
> > drivers/net: AXM5516 emulation bringup - lsi_acp_net.c
> > drivers/net: AXM5516 emulation bringup - Makefile
> > drivers/net/ethernet: Wrapper Cleanup
> > drivers/tty: Handle baud rate changes. The initial port only ran at
> > 115200.
> > arm/boot/dts: The device tree for AXM5516 emulation.
> > arm/boot/dts: The device tree for Amarillo.
> > drivers/tty: Hard code the baud rate divisors for now.
> > arm/mach-axxia: Remove debug printk().
> > drivers/tty: Handle the baud rate correctly, and use the PLLs provided
> > by U-Boot to set up the clocks.
> > arm/boot/dts: Reserve memory from 0 to 4M (for U-Boot).
> > arm/mach-axxia: Wait a bit more gently when in the pen.
> > arm/mach-axxia: Clean up the sequence of starting other cores.
> > arm/boot/dts: Added phy-link, and changed the default phy address to
> > 0x1e.
> > drivers/net: Added debug code.
> > arm/include: A clean up of the femac code.
> > drivers/net: The work around for Amarillo needs to be done the first
> > time as well!
> > drivers/net/ethernet: Use ntohl() instead of #defines and swab32().
> > drivers/spi: Don't check for the, no longer used, enabled property.
> > arch/arm/mach-axxia: add support for SPI flash
> > arm-powerpc-drivers: Add the necessary wrappers to all architectures.
> > arm/mach-axxia: PCIe support.
> > arm-powerpc-drivers: Rearrange the location of the wrapper functions
> > drivers/net/ethernet: Remove the Amarillo networking work-around by
> > default.
> > arch: LSI Axxia systems use a config ring to access parts of the
> > hardware.
> > drivers/misc: System memory monitoring for AXM55xx.
> > drivers/misc: Add a parameter to the smmon module, log.
> > drivers/misc: lsi-smmon - Mask unmonitored bits in the interrupt mask
> > register
> > arm/mach-axxia: L3 Cache is not available in simulation!
> > arm/mach-axxia: Add dummy versions of the mdio access functions
> > drivers/ethernet: Set the watermark correctly in emulation
> > powerpc/dts: adds support for acp35xx emulation
> > arm/mach-axxia: The offset was not being passed to __arm_ioremap_pfn!
> >
> >Michael Bringmann (5):
> > drivers/i2c: Collapse AI2C driver implementation - removing ai2c_dev
> > drivers/i2c: Collapse AI2C driver implementation - removing ai2c_*
> > drivers/i2c: Collapse AI2C driver implementation - removing ai2c/regs
> > drivers/i2c: Collapse AI2C driver implementation mods
> > drivers/i2c: Collapse AI2C driver implementation - adding i2c_regs
> >
> >Niraj Desai (1):
> > drivers/usb: LSI AXM5500 USB driver support
> >
> >Paul Butler (5):
> > powerpc/configs: remove elpaso defconfig
> > Support for the new BCM 5221 phy - acp_mdio
> > drivers/misc: adding MTC to dts
> > drivers/net: adding ifdef for Amarillo, without the auto-negotiate
> > ecn.
> > arm/dts: whitespace cleanup axm55xx.dts
> >
> >SangeethaRao (7):
> > arm/mach-axxia: Updated such that GFP_DMA mask is correctly set to 32
> > bits for AXM55xx
> > drivers/usb: USB driver changes for AXM55xx
> > arm/mach-axxia: Updated PCIe driver since it had incorrect PEI log
> > info
> > arm/mach-axxia: Fixed type1 PCIe enumeration issue
> > drivers/usb: USB driver changes to improve performance on AXM55xx.
> > drivers/net: FEMAC hprot register wasn't being set to uncached mode
> > usb: Added check to confirm that USB controller is stopped before
> > trying to reset it
> >
> >wwang22 (1):
> > drivers/misc: Disabled debug message in MTC driver
> >
> > arch/arm/Kconfig | 1 +
> > arch/arm/Makefile | 4 +
> > arch/arm/boot/compressed/head.S | 63 +-
> > arch/arm/boot/dts/axm55xx.dts | 391 ++--
> > arch/arm/boot/dts/axm55xxemu.dts | 202 ++
> > arch/arm/boot/dts/axm55xxsim.dts | 6 +-
> > arch/arm/boot/emuboot/Makefile | 10 +-
> > arch/arm/boot/emuboot/emuboot.S | 27 +-
> > arch/arm/boot/emuboot/emuboot.lds | 4 +-
> > arch/arm/include/asm/lsi/acp_ncr.h | 3 +
> > arch/arm/kernel/head.S | 8 +
> > arch/arm/mach-axxia/Kconfig | 3 +
> > arch/arm/mach-axxia/Makefile | 4 +-
> > arch/arm/mach-axxia/axxia-gic.c | 120 +-
> > arch/arm/mach-axxia/axxia.c | 92 +-
> > arch/arm/mach-axxia/clock.c | 97 +
> > arch/arm/mach-axxia/ddr_retention.c | 282 +++
> > arch/arm/mach-axxia/headsmp.S | 30 +-
> > arch/arm/mach-axxia/hotplug.c | 52 +-
> > arch/arm/mach-axxia/include/mach/debug-macro.S | 34 +-
> > arch/arm/mach-axxia/io.c | 2 +-
> > arch/arm/mach-axxia/pci.c | 6 +-
> > arch/arm/mach-axxia/platsmp.c | 121 +-
> > arch/arm/mach-axxia/wrappers.c | 176 ++
> > arch/powerpc/boot/dts/acp25xx.dts | 309 +++
> > arch/powerpc/boot/dts/acp342x.dts | 309 +++
> > arch/powerpc/boot/dts/acp344x.dts | 309 +++
> > arch/powerpc/boot/dts/acp35xx.dts | 406 ++++
> > arch/powerpc/configs/elpaso_defconfig | 2138 -------------------
> > arch/powerpc/include/asm/lsi/acp_ncr.h | 42 -
> > arch/powerpc/perf/core-lsi-acp.c | 115 +-
> > arch/powerpc/perf/ppc476-pmu.c | 59 -
> > arch/powerpc/sysdev/Kconfig | 2 +-
> > arch/powerpc/sysdev/Makefile | 4 +-
> > arch/powerpc/sysdev/lsi_acp_ncr.c | 375 ----
> > arch/powerpc/sysdev/lsi_acp_wrappers.c | 132 ++
> > arch/powerpc/sysdev/lsi_pci.c | 2 +-
> > drivers/dma/lsi-dma32.c | 25 +-
> > drivers/dma/lsi-dma32.h | 5 +
> > drivers/i2c/busses/Makefile | 2 +-
> > drivers/i2c/busses/ai2c/Makefile | 5 +-
> > drivers/i2c/busses/ai2c/ai2c_bus.h | 881 +++++++-
> > drivers/i2c/busses/ai2c/ai2c_bus_axm5500.c | 5 +-
> > drivers/i2c/busses/ai2c/ai2c_dev.h | 228 ---
> > drivers/i2c/busses/ai2c/ai2c_dev_clock.c | 493 -----
> > drivers/i2c/busses/ai2c/ai2c_dev_clock_ext.h | 41 -
> > drivers/i2c/busses/ai2c/ai2c_i2c_regs.h | 2165 ++++++++++++++++++++
> > drivers/i2c/busses/ai2c/ai2c_mod.c | 1267 +++++++++++-
> > drivers/i2c/busses/ai2c/ai2c_plat.c | 758 -------
> > drivers/i2c/busses/ai2c/ai2c_plat.h | 336 ---
> > drivers/i2c/busses/ai2c/ai2c_sal.c | 109 -
> > drivers/i2c/busses/ai2c/ai2c_sal.h | 393 ----
> > drivers/i2c/busses/ai2c/ai2c_types.h | 118 --
> > drivers/i2c/busses/ai2c/regs/ai2c_axi_timer_regs.h | 202 --
> > .../busses/ai2c/regs/ai2c_cfg_node_reg_defines.h | 39 -
> > drivers/i2c/busses/ai2c/regs/ai2c_cfg_node_regs.h | 146 --
> > drivers/i2c/busses/ai2c/regs/ai2c_i2c_regs.h | 1797 ----------------
> > drivers/i2c/busses/ai2c/regs/ai2c_regions.h | 81 -
> > drivers/i2c/busses/i2c-axxia.c | 589 ++++++
> > drivers/misc/Kconfig | 12 +
> > drivers/misc/Makefile | 2 +
> > drivers/misc/lsi-mtc.c | 1374 ++++++-------
> > drivers/misc/lsi-ncr.c | 423 ++++
> > drivers/misc/lsi-ncr.h | 42 +
> > drivers/misc/lsi-smmon.c | 303 +++
> > drivers/net/ethernet/lsi/Makefile | 1 +
> > drivers/net/ethernet/lsi/lsi_acp_mdio.c | 326 +++
> > drivers/net/ethernet/lsi/lsi_acp_net.c | 386 ++--
> > drivers/net/ethernet/lsi/lsi_acp_net.h | 72 +-
> > drivers/spi/spi-pl022.c | 42 +-
> > drivers/tty/serial/amba-pl011.c | 36 +-
> > drivers/tty/serial/lsi_acp_serial.c | 2 -
> > drivers/usb/host/Kconfig | 8 +-
> > drivers/usb/host/ehci-ci13612.c | 151 +-
> > drivers/usb/host/ehci-ci13612.h | 2 +-
> > 75 files changed, 10167 insertions(+), 8640 deletions(-)
> > create mode 100644 arch/arm/boot/dts/axm55xxemu.dts
> > create mode 100644 arch/arm/mach-axxia/ddr_retention.c
> > create mode 100644 arch/arm/mach-axxia/wrappers.c
> > create mode 100644 arch/powerpc/boot/dts/acp25xx.dts
> > create mode 100644 arch/powerpc/boot/dts/acp342x.dts
> > create mode 100644 arch/powerpc/boot/dts/acp344x.dts
> > create mode 100644 arch/powerpc/boot/dts/acp35xx.dts
> > delete mode 100755 arch/powerpc/configs/elpaso_defconfig
> > delete mode 100644 arch/powerpc/include/asm/lsi/acp_ncr.h
> > delete mode 100644 arch/powerpc/sysdev/lsi_acp_ncr.c
> > create mode 100644 arch/powerpc/sysdev/lsi_acp_wrappers.c
> > delete mode 100644 drivers/i2c/busses/ai2c/ai2c_dev.h
> > delete mode 100644 drivers/i2c/busses/ai2c/ai2c_dev_clock.c
> > delete mode 100644 drivers/i2c/busses/ai2c/ai2c_dev_clock_ext.h
> > create mode 100644 drivers/i2c/busses/ai2c/ai2c_i2c_regs.h
> > delete mode 100644 drivers/i2c/busses/ai2c/ai2c_plat.c
> > delete mode 100644 drivers/i2c/busses/ai2c/ai2c_plat.h
> > delete mode 100644 drivers/i2c/busses/ai2c/ai2c_sal.c
> > delete mode 100644 drivers/i2c/busses/ai2c/ai2c_sal.h
> > delete mode 100644 drivers/i2c/busses/ai2c/ai2c_types.h
> > delete mode 100644 drivers/i2c/busses/ai2c/regs/ai2c_axi_timer_regs.h
> > delete mode 100644 drivers/i2c/busses/ai2c/regs/ai2c_cfg_node_reg_defines.h
> > delete mode 100644 drivers/i2c/busses/ai2c/regs/ai2c_cfg_node_regs.h
> > delete mode 100644 drivers/i2c/busses/ai2c/regs/ai2c_i2c_regs.h
> > delete mode 100644 drivers/i2c/busses/ai2c/regs/ai2c_regions.h
> > create mode 100644 drivers/i2c/busses/i2c-axxia.c
> > create mode 100644 drivers/misc/lsi-ncr.c
> > create mode 100644 drivers/misc/lsi-ncr.h
> > create mode 100644 drivers/misc/lsi-smmon.c
> > create mode 100644 drivers/net/ethernet/lsi/lsi_acp_mdio.c
> >
>
More information about the linux-yocto
mailing list