[linux-yocto] [PATCH 33/94] drivers/tty: Handle baud rate changes. The initial port only ran at 115200.

[Paul Butler]

From: John Jacques <john.jacques at lsi.com>

Signed-off-by: John Jacques <john.jacques at lsi.com>
---
 arch/arm/mach-axxia/clock.c     | 64 +++++++++++++++++++++++++++++++++++++++++
 drivers/tty/serial/amba-pl011.c |  4 +--
 2 files changed, 66 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-axxia/clock.c b/arch/arm/mach-axxia/clock.c
index 619ba5d..27ace6f 100644
--- a/arch/arm/mach-axxia/clock.c
+++ b/arch/arm/mach-axxia/clock.c
@@ -25,6 +25,7 @@
 		clkdev_add(cl); \
 	} while (0)
 
+#ifdef CONFIG_ARCH_AXXIA_SIM
 
 void __init
 axxia_init_clocks(void)
@@ -77,3 +78,66 @@ axxia_init_clocks(void)
 	/* PL180 MMCI */
 	clk_register_clkdev(clk, NULL, "mmci");
 }
+
+#else
+
+/*
+  -------------------------------------------------------------------------------
+  axxia_init_clocks
+
+  Clock setup for Emulation/ASIC systems.
+*/
+
+void __init
+axxia_init_clocks(void)
+{
+	struct clk *clk;
+	int i;
+
+	/* APB clock dummy */
+	clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL,
+				      CLK_IS_ROOT, AXXIA_SYS_CLOCK/2);
+	clk_register_clkdev(clk, "apb_pclk", NULL);
+
+	/* CPU core clock (1400MHz) from CPU_PLL */
+	clk = clk_register_fixed_rate(NULL, "clk_cpu", NULL,
+				      CLK_IS_ROOT, AXXIA_CPU_CLOCK);
+
+	/* APB and System AXI clock from CPU_PLL */
+	clk = clk_register_fixed_rate(NULL, "clk_pclk", NULL,
+				      CLK_IS_ROOT, AXXIA_CPU_CLOCK/9);
+
+	/* DDR3 (interface 1) clock from SMEM1_PLL */
+	clk = clk_register_fixed_rate(NULL, "clk_smem1_2x", NULL,
+				      CLK_IS_ROOT, AXXIA_DDR_CLOCK);
+
+	/* AXIS slow peripheral clock from SMEM1_PLL. */
+	clk = clk_register_fixed_rate(NULL, "clk_per", NULL,
+				      CLK_IS_ROOT, 2000000);
+	/* PL011 UART0 */
+	clk_register_clkdev(clk, NULL, "2010080000.uart");
+	/* PL011 UART1 */
+	clk_register_clkdev(clk, NULL, "2010081000.uart");
+	/* PL011 UART2 */
+	clk_register_clkdev(clk, NULL, "2010082000.uart");
+	/* PL011 UART3 */
+	clk_register_clkdev(clk, NULL, "2010083000.uart");
+	/* PL022 SSP */
+	clk_register_clkdev(clk, NULL, "ssp");
+
+	/* Timers 1MHz clock */
+	clk = clk_register_fixed_rate(NULL, "clk_1mhz", NULL,
+				      CLK_IS_ROOT, 1000000);
+	/* SP804 timers */
+	clk_register_clkdev(clk, NULL, "sp804");
+	for (i = 0; i < 8; i++)
+		clk_register_clkdev(clk, NULL, "axxia-timer%d", i);
+
+	/* Dummy MMC clk */
+	clk = clk_register_fixed_rate(NULL, "clk_mmci", NULL,
+				      CLK_IS_ROOT, 25000000);
+	/* PL180 MMCI */
+	clk_register_clkdev(clk, NULL, "mmci");
+}
+
+#endif
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index abe91eb..aa46383 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1378,7 +1378,7 @@ static void pl010_put_poll_char(struct uart_port *port,
 
 #endif /* CONFIG_CONSOLE_POLL */
 
-static int pl011_startup(struct uart_port *port)
+/*ZZZ static*/ int pl011_startup(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 	unsigned int cr;
@@ -1667,7 +1667,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 			quot -= 2;
 	}
 	/* Set baud rate */
-#if 0
+#if 1
 	writew(quot & 0x3f, port->membase + UART011_FBRD);
 	writew(quot >> 6, port->membase + UART011_IBRD);
 #else
-- 
1.8.3.4