[linux-yocto] 3.10, standard/base at 3.10.17, but reverts back to 3.10.10...

[Darren Hart]

On Tue, 2013-11-05 at 17:15 -0600, Tom Zanussi wrote:
> On Tue, 2013-11-05 at 14:52 -0800, Darren Hart wrote:
> > I'm working on rewriting the minnow-io feature to just apply patches.
> > It's working.... but something is seriously horked with 3.10 - or my
> > 3.10 tree.... or.... I don't know. HALP!
> > 
> > The first problem was it was building PREEMPT_RT from a linux-yocto
> > recipe. Turns out the eg20t feature has a branch (even in the
> > yoctoproject.org git repo) which includes the preempt-rt sources, so
> > those were all getting merged in. I removed the eg20t branch command and
> > now preempt-rt isn't getting merged in. First I don't understand why
> > eg20t even has a branch (did I do that?). Second, why would it contain
> 
> I'm not sure how the eg20t branch could be getting merged in - the eg20t
> feature doesn't contain a 'git merge', and is just there for the .cfg.
> 
> The eg20t branch originally contained about 70 eg20t patches before
> they'd gone upstream, and is now useless AFAIK, so should probably be
> removed.
> 
> > PREEMPT_RT? Fumbled upgrade?
> 
> Sounds like it, but based on the above it shouldn't really matter as it
> shouldn't be used at all..

Right, it didn't have a merge command, just a branch:

$ cat meta/cfg/kernel-cache/features/eg20t/eg20t.scc                                 
# changes should be staged on "eg20t"                                                
git branch eg20t master                                                              
                                                                                     
kconf hardware eg20t.cfg 

Still, including this scc brought in the eg20t branch. Perhaps if the
branch name exists the branch command does a merge? Bug?

I've confirmed this reverting to 3.10.10 happens in the do_patch()
task, but I don't know where or why yet.

> > I also dropped emgd to avoid any mess there. Now, the minnow-io patches
> > are still applied, but instead of being at 3.10.17 from standard/base,
> > we're back at 3.10.10. Any ideas what might be going on here?
> > 
> > $ git l
> > e683d6f minnowboard-keys: Bind MinnowBoard buttons to arrow keys
> > 8ae33bc minnowboard-gpio: Export MinnowBoard expansion GPIO
> > cebeec1 minnowboard: Add base platform driver for the MinnowBoard
> > e3c69f2 gpio-sch: Add sch_gpio_resume_set_enable()
> > ebc8428 Merge tag 'v3.10.10' into standard/base
> > b76f445 yaffs2: disable procfs support
> > ecfe5ed yaffs2: convert to kuid_t and kgid_t
> > fa8efc9 yaffs2: restore multi-kernel version functionality
> > 8bf3379 Linux 3.10.10
> > 
> > 
> > I'm building from master with my meta changes.

Happens from dora too.

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel