[linux-yocto] [PATCH 15/87] arch/arm: Updating Kconfig and Makefile for axxia
Bruce Ashfield
bruce.ashfield at windriver.com
Mon May 27 11:09:14 PDT 2013
On 13-05-27 12:55 PM, Paul Butler wrote:
> From: Jiang Lu <lu.jiang at windriver.com>
>
> Signed-off-by: Paul Butler <paul.butler at windriver.com>
> ---
> arch/arm/Kconfig | 23 +++++++++++++++++++++++
> arch/arm/Makefile | 3 ++-
> 2 files changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index a68ad22..5cab886 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -326,6 +326,27 @@ config ARCH_VERSATILE
> help
> This enables support for ARM Ltd Versatile board.
>
> +config ARCH_AXXIA
> + bool "LSI Axxia family"
> + select ARCH_PHYS_ADDR_T_64BIT
> + select ARCH_DMA_ADDR_T_64BIT
Looks like a mix of tabs and whitespace .. or something else, but
regardless, these should line up.
Bruce
> + select ARCH_WANT_OPTIONAL_GPIOLIB
> + select ARM_AMBA
> + select COMMON_CLK
> + select CLKDEV_LOOKUP
> + select CLKSRC_MMIO
> + select GENERIC_CLOCKEVENTS
> + select HAVE_CLK
> + select HAVE_PATA_PLATFORM
> + select ARM_TIMER_SP804
> + select ICST
> + select NEED_MACH_IO_H
> + select PCI
> + select PCI_DOMAINS if PCI
> + select ARCH_SUPPORTS_MSI if PCI
> + help
> + This enables support for the LSI Axxia boards.
> +
> config ARCH_VEXPRESS
> bool "ARM Ltd. Versatile Express family"
> select ARCH_WANT_OPTIONAL_GPIOLIB
> @@ -1134,6 +1155,8 @@ source "arch/arm/mach-ux500/Kconfig"
>
> source "arch/arm/mach-versatile/Kconfig"
>
> +source "arch/arm/mach-axxia/Kconfig"
> +
> source "arch/arm/mach-vexpress/Kconfig"
> source "arch/arm/plat-versatile/Kconfig"
>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index eb6ecae..db992cd 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -190,6 +190,7 @@ machine-$(CONFIG_ARCH_U300) := u300
> machine-$(CONFIG_ARCH_U8500) := ux500
> machine-$(CONFIG_ARCH_VERSATILE) := versatile
> machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
> +machine-$(CONFIG_ARCH_AXXIA) := axxia
> machine-$(CONFIG_ARCH_VT8500) := vt8500
> machine-$(CONFIG_ARCH_W90X900) := w90x900
> machine-$(CONFIG_FOOTBRIDGE) := footbridge
> @@ -307,7 +308,7 @@ define archhelp
> echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
> echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
> echo ' uImage - U-Boot wrapped zImage'
> - echo ' bootpImage - Combined zImage and initial RAM disk'
> + echo ' bootpImage - Combined zImage and initial RAM disk'
> echo ' (supply initrd image via make variable INITRD=<path>)'
> echo ' dtbs - Build device tree blobs for enabled boards'
> echo ' install - Install uncompressed kernel'
>
More information about the linux-yocto
mailing list