[linux-yocto] [PATCH 68/70] drivers/misc: initial MTC driver
Paul Butler
butler.paul at gmail.com
Mon Jun 10 18:46:31 PDT 2013
From: Anders Berg <anders.berg at lsi.com>
* Device driver for LSI Master Test Controller (MTC), which is a test
* generator that is fully compliant with IEEE 1149.1 and can run JTAG test
* sequences on external devices. The device is accessed via a character
* device (/dev/mtc) through which test sequences can be loaded and exececuted
* by the controller.
Added Master Test Controller (mtc) to device tree.
Add driver skeleton for MTC (master test controller).
removed test code in MTC driver
Signed-off-by: Wen Wang<wen.wang at lsi.com>
Signed-off-by: Anders Berg <anders.berg at lsi.com>
Signed-off-by: Paul Butler <paul.butler at windriver.com>
---
arch/arm/boot/dts/axm55xx.dts | 6 +
arch/arm/boot/dts/axm55xxsim.dts | 6 +
drivers/misc/Kconfig | 8 +
drivers/misc/Makefile | 1 +
drivers/misc/lsi-mtc.c | 3085 ++++++++++++++++++++++++++++++++++++++
include/linux/lsi_mtc_ioctl.h | 72 +
6 files changed, 3178 insertions(+)
create mode 100644 drivers/misc/lsi-mtc.c
create mode 100644 include/linux/lsi_mtc_ioctl.h
diff --git a/arch/arm/boot/dts/axm55xx.dts b/arch/arm/boot/dts/axm55xx.dts
index 053ad2d..305e79c 100644
--- a/arch/arm/boot/dts/axm55xx.dts
+++ b/arch/arm/boot/dts/axm55xx.dts
@@ -102,6 +102,12 @@
reg = <0x20 0x10094000 0 0x1000>;
};
+ mtc at 2010098000 {
+ compatible = "lsi,mtc";
+ reg = <0x20 0x10098000 0 0x3000>;
+ interrupts = <0 45 4>;
+ };
+
ethernet at 201100000000 {
compatible = "smsc,lan91c111";
device_type = "network";
diff --git a/arch/arm/boot/dts/axm55xxsim.dts b/arch/arm/boot/dts/axm55xxsim.dts
index 4410309..ee6f852 100644
--- a/arch/arm/boot/dts/axm55xxsim.dts
+++ b/arch/arm/boot/dts/axm55xxsim.dts
@@ -197,6 +197,12 @@
reg = <0x20 0x10094000 0 0x1000>;
};
+ mtc at 2010098000 {
+ compatible = "lsi,mtc";
+ reg = <0x20 0x10098000 0 0x3000>;
+ interrupts = <0 45 4>;
+ };
+
ethernet at 201100000000 {
compatible = "smsc,lan91c111";
device_type = "network";
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index c779509..3c3df22 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -498,6 +498,14 @@ config MAX8997_MUIC
Maxim MAX8997 PMIC.
The MAX8997 MUIC is a USB port accessory detector and switch.
+config LSI_MTC
+ tristate "LSI Master Test Controller driver"
+ depends on ARCH_AXXIA
+ help
+ The Master Test Controller (MTC) is a test generator that is fully
+ compliant with IEEE 1149.1 and can run JTAG test sequences on
+ external devices.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 3e1d8010..0dc8a64 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -49,3 +49,4 @@ obj-y += carma/
obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/
obj-$(CONFIG_MAX8997_MUIC) += max8997-muic.o
+obj-$(CONFIG_LSI_MTC) += lsi-mtc.o
diff --git a/drivers/misc/lsi-mtc.c b/drivers/misc/lsi-mtc.c
new file mode 100644
index 0000000..dcef03e
--- /dev/null
+++ b/drivers/misc/lsi-mtc.c
@@ -0,0 +1,3085 @@
+/*
+ * Copyright (C) 2013 LSI Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Device driver for LSI Master Test Controller (MTC), which is a test
+ * generator that is fully compliant with IEEE 1149.1 and can run JTAG test
+ * sequences on external devices. The device is accessed via a character
+ * device (/dev/mtc) through which test sequences can be loaded and exececuted
+ * by the controller.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/interrupt.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/atomic.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include "linux/lsi_mtc_ioctl.h"
+
+
+/*
+ device tree node:
+
+ mtc at 2010098000 {
+ compatible = "lsi,mtc";
+ reg = <0x20 0x10098000 0 0x3000>;
+ interrupts = <0 45 4>;
+ };
+
+ */
+
+
+/* MTC registers */
+struct mtc_regs {
+ u32 params; /* 0x00 */
+ u32 scratch0; /* 0x04 */
+ u32 scratch1; /* 0x08 */
+ u32 reserved_0c[1]; /* 0x0c */
+ u32 config0; /* 0x10 */
+ u32 config1; /* 0x14 */
+ u32 reserved_18[2]; /* 0x18..0x1c */
+ u32 status1; /* 0x20 */
+ u32 status2; /* 0x24 */
+ u32 reserved_28[2]; /* 0x28..0x2c */
+ u32 execute; /* 0x30 */
+ u32 reserved_34[3]; /* 0x34..0x3c */
+ u32 mem_init; /* 0x40 */
+ u32 ecc_disable; /* 0x44 */
+ u32 ecc_invert_en; /* 0x48 */
+ u32 ecc_invert; /* 0x4c */
+ u32 int_status; /* 0x50 */
+ u32 int_enable; /* 0x54 */
+ u32 int_force; /* 0x58 */
+ u32 ecc_int_status; /* 0x5c */
+ u32 ecc_int_enable; /* 0x60 */
+ u32 ecc_int_force; /* 0x64 */
+ u32 reserved_68[6]; /* 0x68..0x7c */
+ u32 debug0; /* 0x80 */
+ u32 debug1; /* 0x84 */
+ u32 debug2; /* 0x88 */
+ u32 debug3; /* 0x8c */
+ u32 debug4; /* 0x90 */
+ u32 debug5; /* 0x94 */
+};
+
+#define MTC_PRGMEM_OFFSET 0x1000
+#define MTC_TDOMEM_OFFSET 0x2000
+#define MTC_PRGMEM_SIZE 256 /* program memory size in words */
+#define MTC_TDOMEM_SIZE 256 /* tdo memory size in words */
+
+
+#ifdef __MTC_SIMULATION
+ struct mtc_regs _mtc_regs;
+ u32 _mtc_tdomem[256] = {0x11110000, 0x22221111, 0x33332222};
+ u32 *_mtc_prgmem = _mtc_tdomem;
+
+#endif
+
+
+
+/******************************************************/
+/* register definitions generated from RDL */
+
+/******************************************************/
+
+ /* NODE 0x15d , TARGET 0xffffffff*/
+
+
+#define NCP_AXIS_MTC_MTC_INST_PARAMS0_REG_ADDR (0x00000000)
+#define NCP_AXIS_MTC_MTC_SCRATCH0_REG_ADDR (0x00000004)
+#define NCP_AXIS_MTC_MTC_SCRATCH1_REG_ADDR (0x00000008)
+#define NCP_AXIS_MTC_MTC_CONFIG0_REG_ADDR (0x00000010)
+#define NCP_AXIS_MTC_MTC_CONFIG1_REG_ADDR (0x00000014)
+#define NCP_AXIS_MTC_MTC_STATUS1_REG_ADDR (0x00000020)
+#define NCP_AXIS_MTC_MTC_STATUS2_REG_ADDR (0x00000024)
+#define NCP_AXIS_MTC_MTC_EXECUTE1_REG_ADDR (0x00000030)
+#define NCP_AXIS_MTC_MTC_MEM_INIT_REG_ADDR (0x00000040)
+#define NCP_AXIS_MTC_MTC_ECC_DISABLE_REG_ADDR (0x00000044)
+#define NCP_AXIS_MTC_MTC_ECC_INVERT_EN_REG_ADDR (0x00000048)
+#define NCP_AXIS_MTC_MTC_ECC_INVERT_REG_ADDR (0x0000004c)
+#define NCP_AXIS_MTC_MTC_DEBUG0_REG_ADDR (0x00000080)
+#define NCP_AXIS_MTC_MTC_DEBUG1_REG_ADDR (0x00000084)
+#define NCP_AXIS_MTC_MTC_DEBUG2_REG_ADDR (0x00000088)
+#define NCP_AXIS_MTC_MTC_DEBUG3_REG_ADDR (0x0000008c)
+#define NCP_AXIS_MTC_MTC_DEBUG4_REG_ADDR (0x00000090)
+#define NCP_AXIS_MTC_MTC_DEBUG5_REG_ADDR (0x00000094)
+
+#define NCP_AXIS_MTC_MTC_PRGM_MEM_START_ADDR_BASE (0x00001000)
+#define NCP_AXIS_MTC_MTC_PRGM_MEM_START_ADDR(n) (0x00001000 + (4*(n)))
+#define NCP_AXIS_MTC_MTC_PRGM_MEM_START_ADDR_COUNT (0x00000100)
+#define NCP_AXIS_MTC_MTC_PRGM_MEM_START_ADDR_IDX(addr) \
+ (((addr) - NCP_AXIS_MTC_MTC_PRGM_MEM_START_ADDR_BASE) / 4)
+#define NCP_AXIS_MTC_MTC_PRGM_MEM_START_ADDR_END (0x00001400)
+#define NCP_AXIS_MTC_MTC_PRGM_MEM_START_ADDR_RANGE(addr) \
+ (((addr) >= NCP_AXIS_MTC_MTC_PRGM_MEM_START_ADDR_BASE) && \
+ ((addr) < NCP_AXIS_MTC_MTC_PRGM_MEM_START_ADDR_END))
+
+
+#define NCP_AXIS_MTC_MTC_TDO_CAPTURE_MEM_START_ADDR_BASE (0x00002000)
+#define NCP_AXIS_MTC_MTC_TDO_CAPTURE_MEM_START_ADDR(n) (0x00002000 + (4*(n)))
+#define NCP_AXIS_MTC_MTC_TDO_CAPTURE_MEM_START_ADDR_COUNT (0x00000100)
+#define NCP_AXIS_MTC_MTC_TDO_CAPTURE_MEM_START_ADDR_IDX(addr) \
+ (((addr) - NCP_AXIS_MTC_MTC_TDO_CAPTURE_MEM_START_ADDR_BASE) / 4)
+#define NCP_AXIS_MTC_MTC_TDO_CAPTURE_MEM_START_ADDR_END (0x00002400)
+#define NCP_AXIS_MTC_MTC_TDO_CAPTURE_MEM_START_ADDR_RANGE(addr) \
+ (((addr) >= NCP_AXIS_MTC_MTC_TDO_CAPTURE_MEM_START_ADDR_BASE) && \
+ ((addr) < NCP_AXIS_MTC_MTC_TDO_CAPTURE_MEM_START_ADDR_END))
+
+#define NCP_AXIS_MTC_MTC_TSTGEN_INT_STATUS (0x00000050)
+#define NCP_AXIS_MTC_MTC_TSTGEN_INT_STATUS_ALARM_MASK (0x0000007f)
+#define NCP_AXIS_MTC_MTC_TSTGEN_INT_EN (0x00000054)
+#define NCP_AXIS_MTC_MTC_TSTGEN_INT_EN_ALARM_MASK (0x0000007f)
+#define NCP_AXIS_MTC_MTC_TSTGEN_INT_FRC (0x00000058)
+#define NCP_AXIS_MTC_MTC_TSTGEN_INT_FRC_ALARM_MASK (0x0000007f)
+#define NCP_AXIS_MTC_MTC_ECC_INT_STATUS (0x0000005c)
+#define NCP_AXIS_MTC_MTC_ECC_INT_STATUS_ALARM_MASK (0x0000000f)
+#define NCP_AXIS_MTC_MTC_ECC_INT_EN (0x00000060)
+#define NCP_AXIS_MTC_MTC_ECC_INT_EN_ALARM_MASK (0x0000000f)
+#define NCP_AXIS_MTC_MTC_ECC_INT_FRC (0x00000064)
+#define NCP_AXIS_MTC_MTC_ECC_INT_FRC_ALARM_MASK (0x0000000f)
+
+
+
+/*! @struct ncp_axis_mtc_MTC_INST_PARAMS0_REG_ADDR_r_t
+ * @brief MTC Parameter Register
+ * @details null
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_INST_PARAMS0_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 6 </td>
+ * <td width="20%" align="center"> 26 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_memory_size </td>
+ * <td width="20%" align="center"> 10 </td>
+ * <td width="20%" align="center"> 16 </td>
+ * <td width="30%"> Size of TDO record memory in bytes. </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved1 </td>
+ * <td width="20%" align="center"> 6 </td>
+ * <td width="20%" align="center"> 10 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tst_prgm_memory_size </td>
+ * <td width="20%" align="center"> 10 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Size of Test Program memory in bytes. </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_INST_PARAMS0_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_INST_PARAMS0_REG_ADDR_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:6;
+ unsigned tdo_memory_size:10;
+ unsigned reserved1:6;
+ unsigned tst_prgm_memory_size:10;
+#else /* Little Endian */
+ unsigned tst_prgm_memory_size:10;
+ unsigned reserved1:6;
+ unsigned tdo_memory_size:10;
+ unsigned reserved0:6;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_SCRATCH0_REG_ADDR_r_t
+ * @brief MTC Scratch 0 Register
+ * @details null
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_SCRATCH0_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param scratchpad0 </td>
+ * <td width="20%" align="center"> 32 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> SW read/write register - Not used by MTC hardware. </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_SCRATCH0_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_SCRATCH0_REG_ADDR_r_t{
+ unsigned int scratchpad0;
+};
+
+/*! @struct ncp_axis_mtc_MTC_SCRATCH1_REG_ADDR_r_t
+ * @brief MTC Scratch 1 Register
+ * @details null
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_SCRATCH1_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param scratchpad1 </td>
+ * <td width="20%" align="center"> 32 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> SW read/write register - Not used by MTC hardware. </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_SCRATCH1_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_SCRATCH1_REG_ADDR_r_t{
+ unsigned int scratchpad1;
+};
+
+/*! @struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t
+ * @brief MTC Config 0 Register
+ * @details Configuration/Control Registers for the MTC block
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 16 </td>
+ * <td width="20%" align="center"> 16 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param mtc_mpu_tdo_inactive_en </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 15 </td>
+ * <td width="30%"> 1) When Config mode Includes the AXM in the scan chain.
+ * 1'b0 = MTC_TDO_ENB = 1'b1; TDO Output buffer always
+ * enabled. 1'b1 = MTC_TDO_ENB = JTC_TDO_ENB; TDO
+ * Output buffer follows the JTC control signal. 2)
+ * When Config mode Excludes the AXM in the scan chain.
+ * 1'b0 = MTC_TDO_ENB = 1'b1; TDO Output buffer always
+ * enabled. 1'b1 = MTC_TDO_ENB = Active (1'b1) when in
+ * shift-DR or shift-IR states and inactive (1'b0) in
+ * all other states (tri-state capable).
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param loop_en </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 14 </td>
+ * <td width="30%"> 1'b1 = When an End-of-test command is received the
+ * test program will continue to execute from location
+ * 0 of the memory instead of halting. This assumes
+ * the test program fits within the 256 x 32 bit memory.
+ * 1'b0 = In normal operation the MTC_TESTGEN block
+ * will loop through the 256 location program memory
+ * until an end-of-test command is detected. Once
+ * detected the program will stop execution in its current
+ * state (Run/Test Idle, pause-IR, or pause-DR).
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param single_step_en </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 13 </td>
+ * <td width="30%"> 1'b1 = Single step mode is enabled; 1'b0 = Single
+ * step mode is disabled (ignore writes to single_step
+ * one-shot register Note: In single step mode the
+ * TACP state machine cannot stop in the Select-DR-Scan
+ * state waitng for the user to write the single_step
+ * one-shot register. Therefore, the end-state-bit[28]
+ * value is ignored in this mode and always pauses in
+ * run-test/idle state.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param start_stopn </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 12 </td>
+ * <td width="30%"> 1'b1 = Run/Resume 1'b0 = Stop in current task </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="20%" align="center"> 9 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param rate_sel </td>
+ * <td width="20%" align="center"> 5 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> TCK clock rate based off the internal clk_per clock
+ * rate (nominal value 200 MHz) 5'd0, others = TCK
+ * = Disable 5'd1 = TCK = 20.00 MHz (/10) 5'd2
+ * = TCK = 16.67 MHz (/12) 5'd3 = TCK = 14.28 MHz
+ * (/14) 5'd4 = TCK = 12.50 MHz (/16) 5'd5 =
+ * TCK = 11.11 MHz (/18) 5'd6 = TCK = 10.00 MHz (/20)
+ * 5'd7 = TCK = 9.09 MHz (/22) 5'd8 = TCK = 8.33
+ * MHz (/24) 5'd9 = TCK = 7.14 MHz (/28) 5'd10
+ * = TCK = 6.25 MHz (/32) 5'd11 = TCK = 5.00 MHz
+ * (/40) 5'd12 = TCK = 4.00 MHz (/50) 5'd13 =
+ * TCK = 3.00 MHz (/66) 5'd14 = TCK = 2.00 MHz (/100)
+ * 5'd15 = TCK = 1.00 MHz (/200) 5'd16 = TCK
+ * = 0.50 MHz (/400)
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved2 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param cfg_config_ctl </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> 0,others,illegal=Board Test Mode 1=MTC Internal
+ * Test Mode - Not Supported in AXM 2=MTC External
+ * Mode (AXM Included) - Not Supported in AXM 3=MTC
+ * External Mode (AXM NOT Included) 4=MTC System Test
+ * Mode (AXM Included) - Not Supported in AXM 5=MTC
+ * System Test Mode (AXM NOT Included) Note: The MTC
+ * hardware inhibits entering modes identifed as Not
+ * Supported when mtc_axm_selftst_disable control bit
+ * = 1. If a Not Supported mode is programmed the
+ * device will default to the Board Test Mode.
+ * </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:16;
+ unsigned mtc_mpu_tdo_inactive_en:1;
+ unsigned loop_en:1;
+ unsigned single_step_en:1;
+ unsigned start_stopn:1;
+ unsigned reserved1:3;
+ unsigned rate_sel:5;
+ unsigned reserved2:1;
+ unsigned cfg_config_ctl:3;
+#else /* Little Endian */
+ unsigned cfg_config_ctl:3;
+ unsigned reserved2:1;
+ unsigned rate_sel:5;
+ unsigned reserved1:3;
+ unsigned start_stopn:1;
+ unsigned single_step_en:1;
+ unsigned loop_en:1;
+ unsigned mtc_mpu_tdo_inactive_en:1;
+ unsigned reserved0:16;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_CONFIG1_REG_ADDR_r_t
+ * @brief MTC Config 1 Register
+ * @details TDO Capture and TCK Gapped Clock Control Signals
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_CONFIG1_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 26 </td>
+ * <td width="20%" align="center"> 6 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param record_tdo_in_shift_ir_state </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 5 </td>
+ * <td width="30%"> 1'b1=Capture TDI Input data when in shift-IR state,
+ * 1'b0=Don't Capture data in shift-IR state.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param record_tdo_in_shift_dr_state </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> 1'b1=Capture TDI Input data when in shift-DR state,
+ * 1'b0=Don't Capture data in shift-DR state.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved1 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param sw_gate_tck_test_logic_reset </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> 1'b1=Gap TCK output clock in Test-Logic-Reset State
+ * and start_stopn = STOP(1'b0) Only; 1'b0=Don't Gap
+ * TCK clock
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param sw_gate_tck </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> 1'b1=Gap TCK output clock in all TAPC states; 1'b0=Don't
+ * Gap TCK clock
+ * </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_CONFIG1_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_CONFIG1_REG_ADDR_r_t {
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:26;
+ unsigned record_tdo_in_shift_ir_state:1;
+ unsigned record_tdo_in_shift_dr_state:1;
+ unsigned reserved1:2;
+ unsigned sw_gate_tck_test_logic_reset:1;
+ unsigned sw_gate_tck:1;
+#else /* Little Endian */
+ unsigned sw_gate_tck:1;
+ unsigned sw_gate_tck_test_logic_reset:1;
+ unsigned reserved1:2;
+ unsigned record_tdo_in_shift_dr_state:1;
+ unsigned record_tdo_in_shift_ir_state:1;
+ unsigned reserved0:26;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_STATUS1_REG_ADDR_r_t
+ * @brief MTC Status 1 Register
+ * @details null
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_STATUS1_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="20%" align="center"> 30 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_record_ram_bit_counter </td>
+ * <td width="20%" align="center"> 14 </td>
+ * <td width="20%" align="center"> 16 </td>
+ * <td width="30%"> Number of Valid Bits in the TDO capture memory </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_record_ram_last_addr </td>
+ * <td width="20%" align="center"> 8 </td>
+ * <td width="20%" align="center"> 8 </td>
+ * <td width="30%"> Last address within the TDO capture memory that contains
+ * valid data. Addresses are filled started at bit
+ * location 0 (MSB) -> 31(LSB); address 1, bit 0 -> 31,
+ * ...
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param prgm_mem_rd_addr </td>
+ * <td width="20%" align="center"> 8 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Next Address to be read from program memory In
+ * the pause state this address should be written with
+ * the next task to be processed
+ * </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_STATUS1_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_STATUS1_REG_ADDR_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:2;
+ unsigned tdo_record_ram_bit_counter:14;
+ unsigned tdo_record_ram_last_addr:8;
+ unsigned prgm_mem_rd_addr:8;
+#else /* Little Endian */
+ unsigned prgm_mem_rd_addr:8;
+ unsigned tdo_record_ram_last_addr:8;
+ unsigned tdo_record_ram_bit_counter:14;
+ unsigned reserved0:2;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_STATUS2_REG_ADDR_r_t
+ * @brief MTC Status 2 Register
+ * @details null
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_STATUS2_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param mtc_cmpl_enablen </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 31 </td>
+ * <td width="30%"> 1'b0=Disable MTC Block from Driving JTAG primary IO,
+ * 1'b1=Allow cfg_config_ctl[2:0] register to select
+ * the mode of the MTC block. Note: Control signal
+ * from primary device input pin.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param mtc_axm_selftst_disable </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 30 </td>
+ * <td width="30%"> 1'b1=Disable all MTC configuration modes that allow
+ * access to the internal JTC controller. 1'b0=Allow
+ * all modes. Note: Control signal from internal EFUSE
+ * module.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 12 </td>
+ * <td width="20%" align="center"> 18 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param nxt_task_error </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 17 </td>
+ * <td width="30%"> Fatal Error Detected while Processing a Task resulting
+ * in the MTC block halting. Once the program is fixed
+ * a SW reset is needed to restart the block.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tst_gen_state_error </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 16 </td>
+ * <td width="30%"> Fatal Error Detected while Processing a Task resulting
+ * in the MTC block halting. Once the program is fixed
+ * a SW reset is needed to restart the block.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 15 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_shiftir_tck_off </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 14 </td>
+ * <td width="30%"> TAPC paused in pause-IR state with the TCK clock off
+ * to allow reloading of TESTGEN memory with more instruction
+ * data. The one-shot cont_after_pause, single_step or
+ * the sw_reset register must be written to exit this
+ * state. pause_in_shiftir
+ * = (curr_task_load_jtag_instr_reg_and_pause_in_pause_ir
+ * | curr_task_load_jtag_instr_reg_continue_from_pause_ir
+ * | curr_task_load_jtag_instr_reg_continue_from_pause_ir_and_stop_in_pause_ir)
+ * && curr_tapc_pause_IR) & curr_task_gap_tck_en;
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_shiftdr_tck_off </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 13 </td>
+ * <td width="30%"> TAPC paused in pause-DR state with the TCK clock off
+ * to allow reloading of TESTGEN memory with more data.
+ * The one-shot cont_after_pause, single_step or the
+ * sw_reset register must be written to exit this state.
+ * pause_in_shiftdr = (curr_task_load_jtag_data_reg_and_pause_in_pause_dr
+ * | curr_task_load_jtag_data_reg_continue_from_pause_dr
+ * | curr_task_load_jtag_data_reg_continue_from_pause_dr_and_stop_in_pause_dr)
+ * && curr_tapc_pause_DR) & curr_task_gap_tck_en;
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_run_test_idle_tck_off </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 12 </td>
+ * <td width="30%"> TESTGEN State Machine is Paused in the Run-Test/Idle
+ * state because TCK clock is gapped.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_test_logic_reset_tck_off </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 11 </td>
+ * <td width="30%"> TESTGEN State Machine is Paused in the Test-Logic-Reset
+ * state because TCK clock is gapped.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param testgen_state_machine_paused </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 10 </td>
+ * <td width="30%"> TESTGEN state machine is paused - valid in single
+ * step mode and pause modes
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_shiftir </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 9 </td>
+ * <td width="30%"> TAPC paused in pause-IR state to allow reloading of
+ * TESTGEN memory with more instruction data. The
+ * one-shot cont_after_pause, single_step or the sw_reset
+ * register must be written to exit this state. pause_in_shiftir
+ * = (curr_task_load_jtag_instr_reg_and_pause_in_pause_ir
+ * | curr_task_load_jtag_instr_reg_continue_from_pause_ir
+ * | curr_task_load_jtag_instr_reg_continue_from_pause_ir_and_stop_in_pause_ir)
+ * && curr_tapc_pause_IR);
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_shiftdr </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 8 </td>
+ * <td width="30%"> TAPC paused in pause-DR state to allow reloading of
+ * TESTGEN memory with more data. The one-shot cont_after_pause,
+ * single_step or the sw_reset register must be written
+ * to exit this state. pause_in_shiftdr
+* = (curr_task_load_jtag_data_reg_and_pause_in_pause_dr
+ * | curr_task_load_jtag_data_reg_continue_from_pause_dr
+ * | curr_task_load_jtag_data_reg_continue_from_pause_dr_and_stop_in_pause_dr)
+ * && curr_tapc_pause_DR);
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_inst_i </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> Current task value. </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved2 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_end_of_test </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Test Finished </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_pause_in_run_test_idle_state </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> Pause Bit </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param start_stopn </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Busy Bit </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_STATUS2_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_STATUS2_REG_ADDR_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned mtc_cmpl_enablen:1;
+ unsigned mtc_axm_selftst_disable:1;
+ unsigned reserved0:12;
+ unsigned nxt_task_error:1;
+ unsigned tst_gen_state_error:1;
+ unsigned reserved1:1;
+ unsigned pause_in_shiftir_tck_off:1;
+ unsigned pause_in_shiftdr_tck_off:1;
+ unsigned pause_in_run_test_idle_tck_off:1;
+ unsigned pause_in_test_logic_reset_tck_off:1;
+ unsigned testgen_state_machine_paused:1;
+ unsigned pause_in_shiftir:1;
+ unsigned pause_in_shiftdr:1;
+ unsigned curr_task_inst_i:4;
+ unsigned reserved2:1;
+ unsigned curr_task_end_of_test:1;
+ unsigned curr_task_pause_in_run_test_idle_state:1;
+ unsigned start_stopn:1;
+#else /* Little Endian */
+ unsigned start_stopn:1;
+ unsigned curr_task_pause_in_run_test_idle_state:1;
+ unsigned curr_task_end_of_test:1;
+ unsigned reserved2:1;
+ unsigned curr_task_inst_i:4;
+ unsigned pause_in_shiftdr:1;
+ unsigned pause_in_shiftir:1;
+ unsigned testgen_state_machine_paused:1;
+ unsigned pause_in_test_logic_reset_tck_off:1;
+ unsigned pause_in_run_test_idle_tck_off:1;
+ unsigned pause_in_shiftdr_tck_off:1;
+ unsigned pause_in_shiftir_tck_off:1;
+ unsigned reserved1:1;
+ unsigned tst_gen_state_error:1;
+ unsigned nxt_task_error:1;
+ unsigned reserved0:12;
+ unsigned mtc_axm_selftst_disable:1;
+ unsigned mtc_cmpl_enablen:1;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_EXECUTE1_REG_ADDR_r_t
+ * @brief MTC EXECUTE Register - One-Shot Registers
+ * @details Self Clearing Bits
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_EXECUTE1_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 27 </td>
+ * <td width="20%" align="center"> 5 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_flush_capture_data </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> Write to 1 to force the MTC TDO CAPTURE state machine
+ * to write any remaining data to memory. This signal
+ * would be written before the tdo_capture_reset bit
+ * is set. Self clearing bit.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_capture_reset </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="30%"> Write to 1 to reset the MTC TDO CAPTURE state machine.
+ * All variables set to zero (memory write address, tdo
+ * capture bit count, etc). Self clearing bit.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param sw_reset </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Write to 1 to reset the MTC TESTGEN, MTC TDO CAPTURE
+ * state machines and to recover from the state machine
+ * haulting due to a command error. Self clearing
+ * bit.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param cont_after_pause </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> Write to 1 to allow the MTC TESTGEN state machine
+ * to continue from the pause-IR or pause-DR states.
+ * Self clearing bit.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param single_step </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Write to 1 to allow the MTC_TESTGEN state machine
+ * to process the next command. In the single step
+ * mode the state machine will stop after each task is
+ * processed. Self clearing bit.
+ * </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_EXECUTE1_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_EXECUTE1_REG_ADDR_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:27;
+ unsigned tdo_flush_capture_data:1;
+ unsigned tdo_capture_reset:1;
+ unsigned sw_reset:1;
+ unsigned cont_after_pause:1;
+ unsigned single_step:1;
+#else /* Little Endian */
+ unsigned single_step:1;
+ unsigned cont_after_pause:1;
+ unsigned sw_reset:1;
+ unsigned tdo_capture_reset:1;
+ unsigned tdo_flush_capture_data:1;
+ unsigned reserved0:27;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_MEM_INIT_REG_ADDR_r_t
+ * @brief MTC MEM Init Register
+ * @details Registers to Control Initializing the TDO Capture and TESTPROG memories
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_MEM_INIT_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 21 </td>
+ * <td width="20%" align="center"> 11 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_capture_mem_ini_value </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 10 </td>
+ * <td width="30%"> Memory init value for capture memory </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_capture_mem_do_mem_init </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 9 </td>
+ * <td width="30%"> Do memory initialization. When set, the capture memory
+ * is initialized to either zero or one depending
+ * on tdo_capture_mem_ini_value value by hardware. This
+ * bit clears itself one cycle after being set
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_capture_mem_init_done </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 8 </td>
+ * <td width="30%"> Memory initialization done. When set, the program
+ * memory has been initialized to zero or one by hardware
+ * following setting the tst_prgm_mem_do_mem_init bit
+ * and tst_prgm_mem_ini_value of this register.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved1 </td>
+ * <td width="20%" align="center"> 5 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tst_prgm_mem_ini_value </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Memory init value for program memory </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tst_prgm_mem_do_mem_init </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> Do memory initialization. When set, the program memory
+ * is initialized to either all zero or ones depending
+ * on tst_prgm_mem_ini_value value by hardware. This
+ * bit clears itself one cycle after being set
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tst_prgm_mem_init_done </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Memory initialization done. When set, the program
+ * memory has been initialized to zero or one by hardware
+ * following setting the tst_prgm_mem_do_mem_init
+ * bit and tst_prgm_mem_ini_value of this register.
+ * </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_MEM_INIT_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_MEM_INIT_REG_ADDR_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:21;
+ unsigned tdo_capture_mem_ini_value:1;
+ unsigned tdo_capture_mem_do_mem_init:1;
+ unsigned tdo_capture_mem_init_done:1;
+ unsigned reserved1:5;
+ unsigned tst_prgm_mem_ini_value:1;
+ unsigned tst_prgm_mem_do_mem_init:1;
+ unsigned tst_prgm_mem_init_done:1;
+#else /* Little Endian */
+ unsigned tst_prgm_mem_init_done:1;
+ unsigned tst_prgm_mem_do_mem_init:1;
+ unsigned tst_prgm_mem_ini_value:1;
+ unsigned reserved1:5;
+ unsigned tdo_capture_mem_init_done:1;
+ unsigned tdo_capture_mem_do_mem_init:1;
+ unsigned tdo_capture_mem_ini_value:1;
+ unsigned reserved0:21;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_ECC_DISABLE_REG_ADDR_r_t
+ * @brief MTC MEM Init Register
+ * @details null
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_ECC_DISABLE_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 30 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param disable_ecc_mtc_tst_prgm_mem </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> This bit disables the ECC correction for mtc_tst_prgm_mem
+ * memory.
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param disable_ecc_mtc_tdo_record_mem </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> This bit disables the ECC correction for mtc_tdo_record_mem
+ * memory.
+ * </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_ECC_DISABLE_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_ECC_DISABLE_REG_ADDR_r_t{
+
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:30;
+ unsigned disable_ecc_mtc_tst_prgm_mem:1;
+ unsigned disable_ecc_mtc_tdo_record_mem:1;
+#else /* Little Endian */
+ unsigned disable_ecc_mtc_tdo_record_mem:1;
+ unsigned disable_ecc_mtc_tst_prgm_mem:1;
+ unsigned reserved0:30;
+#endif
+} ;
+
+/*! @struct ncp_axis_mtc_MTC_ECC_INVERT_EN_REG_ADDR_r_t
+ * @brief MTC MEM Invert Enable ECC Register
+ * @details null
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_ECC_INVERT_EN_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 30 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_invert_en_mtc_tst_prgm_mem </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> ECC invert enable for mtc_tst_prgm_mem memory. </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_invert_en_tc_tdo_record_mem </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> ECC invert enable for mtc_tdo_record memory. </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_ECC_INVERT_EN_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_ECC_INVERT_EN_REG_ADDR_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:30;
+ unsigned ecc_invert_en_mtc_tst_prgm_mem:1;
+ unsigned ecc_invert_en_tc_tdo_record_mem:1;
+#else /* Little Endian */
+ unsigned ecc_invert_en_tc_tdo_record_mem:1;
+ unsigned ecc_invert_en_mtc_tst_prgm_mem:1;
+ unsigned reserved0:30;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_ECC_INVERT_REG_ADDR_r_t
+ * @brief MTC MEM Invert ECC Register
+ * @details null
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_ECC_INVERT_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 25 </td>
+ * <td width="20%" align="center"> 7 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_invert_reg </td>
+ * <td width="20%" align="center"> 7 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Each memory type uses appropriate number of bits in
+ * this field starting from right to left. Set one
+ * bit to cause a single bit error, two bits to cause
+ * a double bit error.
+ * </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_ECC_INVERT_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_ECC_INVERT_REG_ADDR_r_t {
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:25;
+ unsigned ecc_invert_reg:7;
+#else /* Little Endian */
+ unsigned ecc_invert_reg:7;
+ unsigned reserved0:25;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_DEBUG0_REG_ADDR_r_t
+ * @brief MTC Debug0 Register
+ * @details DEBUG0: Current Task Values
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_DEBUG0_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param mtc_testgen_tdo_inactive_enb </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 31 </td>
+ * <td width="30%"> When mtc_mpu_tdo_inactive_en control signal is active
+ * (1'b1) this signal is used to control the TDO output
+ * buffer tri-state control input. 1'b1 = TDO Output
+ * Buffer Active; 1'b0 = TDO Output Buffer Inactive
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_gap_tck_en </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 30 </td>
+ * <td width="30%"> 1'b1 = Gap TCK clock in end state; 1'b0 = Don't
+ * Gap TCK clock in end state
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_tck_ctl_i </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 29 </td>
+ * <td width="30%"> Current TASK TCK Control Value </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_end_state_ctl_i </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 28 </td>
+ * <td width="30%"> 1'b1 = Start Next Command from the Select-DR-Scan
+ * State (Clock cannot be stopped) 1'b0 = Go to Run-test/Idle
+ * State - Pause only if Gap TCK Clock active
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="20%" align="center"> 26 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_ctl_i </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="20%" align="center"> 24 </td>
+ * <td width="30%"> Current Task control values </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="20%" align="center"> 21 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param nxt_tstgen_tdi_cnt30 </td>
+ * <td width="20%" align="center"> 5 </td>
+ * <td width="20%" align="center"> 16 </td>
+ * <td width="30%"> Next Shift Cnt value </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved2 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="20%" align="center"> 12 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param task_sub_state </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="20%" align="center"> 8 </td>
+ * <td width="30%"> TESTGEN state Machine subtask counter </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved3 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param nxt_task_inst_i </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Next Task Command Value </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_DEBUG0_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_DEBUG0_REG_ADDR_r_t {
+
+#ifdef NCP_BIG_ENDIAN
+ unsigned mtc_testgen_tdo_inactive_enb:1;
+ unsigned curr_task_gap_tck_en:1;
+ unsigned curr_task_tck_ctl_i:1;
+ unsigned curr_task_end_state_ctl_i:1;
+ unsigned reserved0:2;
+ unsigned curr_task_ctl_i:2;
+ unsigned reserved1:3;
+ unsigned nxt_tstgen_tdi_cnt30:5;
+ unsigned reserved2:4;
+ unsigned task_sub_state:4;
+ unsigned reserved3:4;
+ unsigned nxt_task_inst_i:4;
+#else /* Little Endian */
+ unsigned nxt_task_inst_i:4;
+ unsigned reserved3:4;
+ unsigned task_sub_state:4;
+ unsigned reserved2:4;
+ unsigned nxt_tstgen_tdi_cnt30:5;
+ unsigned reserved1:3;
+ unsigned curr_task_ctl_i:2;
+ unsigned reserved0:2;
+ unsigned curr_task_end_state_ctl_i:1;
+ unsigned curr_task_tck_ctl_i:1;
+ unsigned curr_task_gap_tck_en:1;
+ unsigned mtc_testgen_tdo_inactive_enb:1;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_DEBUG1_REG_ADDR_r_t
+ * @brief MTC Debug1 Register
+ * @details DEBUG1: Current TASK Being Processed
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_DEBUG1_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_no_operation </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 31 </td>
+ *<td width="30%"> Current task being processed is No Operation(4'b0000) </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_test_reset_1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 30 </td>
+ * <td width="30%"> Current task being processed is Test reset 1 (TRSTZ
+ * low for x TCK cycles - 4'b0001)
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_test_reset_2 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 29 </td>
+ * <td width="30%"> Current task being processed is Test reset 2 (TMS
+ * high for x TCK cycles) - 4'b0010
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_load_jtag_inst_reg </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 28 </td>
+ * <td width="30%"> Current task being processed is Load JTAG instruction
+ * register
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_load_jtag_data_reg </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 27 </td>
+ *<td width="30%"> Current task being processed is Load JTAG data register </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_mtc_reserved_task_id_5 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 26 </td>
+ * <td width="30%"> Reserved Task value - Illegal - 4'b0101 </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_mtc_reserved_task_id_6 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 25 </td>
+ * <td width="30%"> Reserved Task value - Illegal - 4'b0110 </td>
+ * </tr>
+ * <tr>
+ * <td width="30%">
+ * @param curr_task_wait_in_run_test_idle_state_xtck_cycles </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 24 </td>
+ * <td width="30%"> Current task being processed is Wait in Run-Test-Idle
+ * state a number of TCK cycles - 4'b1010
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_pause_in_run_test_idle_state </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 23 </td>
+ * <td width="30%"> Current task being processed is Pause in Run-Test-Idle
+ * State - 4'b1011
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_end_of_test </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 22 </td>
+ *<td width="30%"> Current task being processed is End of Test - 4'b1100 </td>
+ * </tr>
+ * <tr>
+ *<td width="30%"> @param
+ * curr_task_load_jtag_data_reg_and_pause_in_pause_dr </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 21 </td>
+ * <td width="30%"> Current task being processed is Load JTAG Data Register
+ * and pause in pause-DR state - 4'b0111
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param
+ * curr_task_load_jtag_data_reg_continue_from_pause_dr </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 20 </td>
+ * <td width="30%"> Current task being processed is Load JTAG Data Register
+ * (continue from pause-DR state) - 4'b1000
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param
+*curr_task_load_jtag_data_reg_continue_from_pause_dr_and_stop_in_pause_dr </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 19 </td>
+ * <td width="30%"> Current task being processed is Load JTAG Data Register
+ * (continue from pause-DR state and end in pause-DR
+ * state - 4'b1001
+ * </td>
+ * </tr>
+ * <tr>
+ *<td width="30%"> @param
+ * curr_task_load_jtag_inst_reg_and_pause_in_pause_ir </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 18 </td>
+ * <td width="30%"> Current task being processed is Load JTAG Instruction
+ * Register and pause in pause-IR state - 4'b1101
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param
+ * curr_task_load_jtag_inst_reg_continue_from_pause_ir </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 17 </td>
+ * <td width="30%"> Current task being processed is Load JTAG Instruction
+ * Register (continue from pause-IR state) - 4'b1110
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param
+*curr_task_load_jtag_inst_reg_continue_from_pause_ir_and_stop_in_pause_ir </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 16 </td>
+ * <td width="30%"> Current task being processed is Load JTAG Instruction
+ * Register (continue from pause-IR state and end in
+ * pause-IR state - 4'b1111
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="20%" align="center"> 12 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_inst_i </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="20%" align="center"> 8 </td>
+ * <td width="30%"> Value of current task being processed </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param prgm_mem_rd_addr </td>
+ * <td width="20%" align="center"> 8 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Address of memory location to be read from program
+ * memory
+ * </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_DEBUG1_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_DEBUG1_REG_ADDR_r_t {
+#ifdef NCP_BIG_ENDIAN
+ unsigned curr_task_no_operation:1;
+ unsigned curr_task_test_reset_1:1;
+ unsigned curr_task_test_reset_2:1;
+ unsigned curr_task_load_jtag_inst_reg:1;
+ unsigned curr_task_load_jtag_data_reg:1;
+ unsigned curr_task_mtc_reserved_task_id_5:1;
+ unsigned curr_task_mtc_reserved_task_id_6:1;
+ unsigned curr_task_wait_in_run_test_idle_state_xtck_cycles:1;
+ unsigned curr_task_pause_in_run_test_idle_state:1;
+ unsigned curr_task_end_of_test:1;
+ unsigned curr_task_load_jtag_data_reg_and_pause_in_pause_dr:1;
+ unsigned curr_task_load_jtag_data_reg_continue_from_pause_dr:1;
+ unsigned
+ curr_task_load_jtag_data_reg_continue_from_pause_dr_and_stop_in_pause_dr : 1;
+ unsigned curr_task_load_jtag_inst_reg_and_pause_in_pause_ir:1;
+ unsigned curr_task_load_jtag_inst_reg_continue_from_pause_ir:1;
+ unsigned
+ curr_task_load_jtag_inst_reg_continue_from_pause_ir_and_stop_in_pause_ir : 1;
+ unsigned reserved0:4;
+ unsigned curr_task_inst_i:4;
+ unsigned prgm_mem_rd_addr:8;
+#else /* Little Endian */
+ unsigned prgm_mem_rd_addr:8;
+ unsigned curr_task_inst_i:4;
+ unsigned reserved0:4;
+ unsigned
+ curr_task_load_jtag_inst_reg_continue_from_pause_ir_and_stop_in_pause_ir : 1;
+ unsigned curr_task_load_jtag_inst_reg_continue_from_pause_ir:1;
+ unsigned curr_task_load_jtag_inst_reg_and_pause_in_pause_ir:1;
+ unsigned
+ curr_task_load_jtag_data_reg_continue_from_pause_dr_and_stop_in_pause_dr : 1;
+ unsigned
+ curr_task_load_jtag_data_reg_continue_from_pause_dr : 1;
+ unsigned curr_task_load_jtag_data_reg_and_pause_in_pause_dr:1;
+ unsigned curr_task_end_of_test:1;
+ unsigned curr_task_pause_in_run_test_idle_state:1;
+ unsigned curr_task_wait_in_run_test_idle_state_xtck_cycles:1;
+ unsigned curr_task_mtc_reserved_task_id_6:1;
+ unsigned curr_task_mtc_reserved_task_id_5:1;
+ unsigned curr_task_load_jtag_data_reg:1;
+ unsigned curr_task_load_jtag_inst_reg:1;
+ unsigned curr_task_test_reset_2:1;
+ unsigned curr_task_test_reset_1:1;
+ unsigned curr_task_no_operation:1;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_DEBUG2_REG_ADDR_r_t
+ * @brief MTC Debug2 Register
+ * @details Current TAPC
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_DEBUG2_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_update_ir </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 31 </td>
+ * <td width="30%"> Current TAPC State is UPDATE-IR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_exit2_ir </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 30 </td>
+ * <td width="30%"> Current TAPC State is EXIT2-IR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_pause_ir </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 29 </td>
+ * <td width="30%"> Current TAPC State is PAUSE-IR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_exit1_ir </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 28 </td>
+ * <td width="30%"> Current TAPC State is EXIT1-IR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_shift_ir </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 27 </td>
+ * <td width="30%"> Current TAPC State is SHIFT-IR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_capture_ir </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 26 </td>
+ * <td width="30%"> Current TAPC State is CAPTURE-IR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_update_dr </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 25 </td>
+ * <td width="30%"> Current TAPC State is UPDATE-DR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_exit2_dr </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 24 </td>
+ * <td width="30%"> Current TAPC State is EXIT2-DR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_pause_dr </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 23 </td>
+ * <td width="30%"> Current TAPC State is PAUSE-DR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_exit1_dr </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 22 </td>
+ * <td width="30%"> Current TAPC State is EXIT1-DR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_shift_dr </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 21 </td>
+ * <td width="30%"> Current TAPC State is SHIFT-DR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_capture_dr </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 20 </td>
+ * <td width="30%"> Current TAPC State is CAPTURE-DR </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_select_ir_scan </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 19 </td>
+ * <td width="30%"> Current TAPC State is SELECT-IR-SCAN </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_select_dr_scan </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 18 </td>
+ * <td width="30%"> Current TAPC State is SELECT-DR-SCAN </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_run_test_idle </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 17 </td>
+ * <td width="30%"> Current TAPC State is RUN-TEST_IDLE </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_tapc_test_logic_reset </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 16 </td>
+ * <td width="30%"> Current TAPC State is TEST-LOGIC-RESET </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 12 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tapc_state </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Current TAPC state value </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_DEBUG2_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_DEBUG2_REG_ADDR_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned curr_tapc_update_ir:1;
+ unsigned curr_tapc_exit2_ir:1;
+ unsigned curr_tapc_pause_ir:1;
+ unsigned curr_tapc_exit1_ir:1;
+ unsigned curr_tapc_shift_ir:1;
+ unsigned curr_tapc_capture_ir:1;
+ unsigned curr_tapc_update_dr:1;
+ unsigned curr_tapc_exit2_dr:1;
+ unsigned curr_tapc_pause_dr:1;
+ unsigned curr_tapc_exit1_dr:1;
+ unsigned curr_tapc_shift_dr:1;
+ unsigned curr_tapc_capture_dr:1;
+ unsigned curr_tapc_select_ir_scan:1;
+ unsigned curr_tapc_select_dr_scan:1;
+ unsigned curr_tapc_run_test_idle:1;
+ unsigned curr_tapc_test_logic_reset:1;
+ unsigned reserved0:12;
+ unsigned tapc_state:4;
+#else /* Little Endian */
+ unsigned tapc_state:4;
+ unsigned reserved0:12;
+ unsigned curr_tapc_test_logic_reset:1;
+ unsigned curr_tapc_run_test_idle:1;
+ unsigned curr_tapc_select_dr_scan:1;
+ unsigned curr_tapc_select_ir_scan:1;
+ unsigned curr_tapc_capture_dr:1;
+ unsigned curr_tapc_shift_dr:1;
+ unsigned curr_tapc_exit1_dr:1;
+ unsigned curr_tapc_pause_dr:1;
+ unsigned curr_tapc_exit2_dr:1;
+ unsigned curr_tapc_update_dr:1;
+ unsigned curr_tapc_capture_ir:1;
+ unsigned curr_tapc_shift_ir:1;
+ unsigned curr_tapc_exit1_ir:1;
+ unsigned curr_tapc_pause_ir:1;
+ unsigned curr_tapc_exit2_ir:1;
+ unsigned curr_tapc_update_ir:1;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_DEBUG3_REG_ADDR_r_t
+ * @brief MTC Debug3 Register
+ * @details TDO Data
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_DEBUG3_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param nxt_tdi_shift_data_d </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 31 </td>
+ * <td width="30%"> TDO value output on the next falling edge of the TCK
+ * clock - nxt_tdi_shift_data_d[0]
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 30 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param nxt_tdi_shift_data </td>
+ * <td width="20%" align="center"> 30 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Next Data to be shifted out </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_DEBUG3_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_DEBUG3_REG_ADDR_r_t {
+#ifdef NCP_BIG_ENDIAN
+ unsigned nxt_tdi_shift_data_d:1;
+ unsigned reserved0:1;
+ unsigned nxt_tdi_shift_data:30;
+#else /* Little Endian */
+ unsigned nxt_tdi_shift_data:30;
+ unsigned reserved0:1;
+ unsigned nxt_tdi_shift_data_d:1;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_MTC_DEBUG4_REG_ADDR_r_t
+ * @brief MTC Debug4 Register
+ * @details Next Task Value
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_DEBUG4_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param nxt_task_inst_i </td>
+ * <td width="20%" align="center"> 32 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Next TASK to be processed </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_DEBUG4_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_DEBUG4_REG_ADDR_r_t{
+ unsigned int nxt_task_inst_i;
+} ;
+
+/*! @struct ncp_axis_mtc_MTC_DEBUG5_REG_ADDR_r_t
+ * @brief MTC Debug5 Register
+ * @details Shift Count Value
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_DEBUG5_REG_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 6 </td>
+ * <td width="20%" align="center"> 26 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param delay_shift_cnt </td>
+ * <td width="20%" align="center"> 26 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Data shift value </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_DEBUG5_REG_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_DEBUG5_REG_ADDR_r_t {
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:6;
+ unsigned delay_shift_cnt:26;
+#else /* Little Endian */
+ unsigned delay_shift_cnt:26;
+ unsigned reserved0:6;
+#endif
+} ;
+
+/*! @struct ncp_axis_mtc_MTC_PRGM_MEM_START_ADDR_r_t
+ * @brief MTC Test Program Memory
+ * @details null
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_PRGM_MEM_START_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tst_prgm </td>
+ * <td width="20%" align="center"> 32 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> TESTGEN program memory Task1 Format: [31:30]=2'b10,
+ * [29]=TCK Action, [28]=0, [27:4]=Unused, [3:0]=Inst
+ * Code Task2 Format: [31:30]=2'b10, [29:16]=Not Used,
+ * [15:4]=TCK Cycles., [3:0]=Inst Code Task3 Format:
+ * [31:30]=2'b10, [29:4]=TCK Cycles., [3:0]=Inst Code
+ * Task4 Format_1: [31:30]=2'b11, [29]=TCK Action,
+ * [28]=End State, [27:16]=Data Shift, [15:4]=Inst
+ * Shift, [3:0]=Inst Code Task4 Format_2: [31:30]=2'b01,
+ * [29:0]=TDI Data (more data to Follow). Task4 Format_3:
+ * [31:30]=2'b00, [29:0]=TDI Data (LAST data).
+ * TASK defintions:Value:Description:TCK [29]:End-State
+ * [28]:Task Format:One-Shot used to release from PAUSE
+ * state 4'b0000: No operation - Should not be used
+ * in programs.:NA:NA:1:NO 4'b0001: Generate test
+ * reset 1 (TRSTZ low for x TCK cycles):NA:NA:2:NO
+ * 4'b0010: Generate test reset 2 (TMS high for x TCK
+ * cycles):NA:NA:2:NO 4'b0011: Load JTAG instruction
+ * register:YES:YES:4:YES 4'b0100: Load JTAG data
+ * register:YES:YES:4:YES 4'b0101: Reserved State:-:-:-:-
+ * 4'b0110: Reserved State:-:-:-:- 4'b0111: Load
+ * JTAG data register and pause in pause-dr:YES:NA:4:YES
+ * 4'b1000: Load JTAG data register (continue from
+ * pause-dr):YES:YES:4:YES 4'b1001: Load JTAG data
+ * register (continue from pause-dr and stop in pause-dr):
+ * YES:YES:4:YES
+ * 4'b1010: Wait in Run-Test-Idle state a number of
+ * TCK cycles:NA:NA:3:NO 4'b1011: Pause in Run-Test-Idle
+ * state:YES:0:1:YES 4'b1100: End of test:YES:0:1:NO
+ * 4'b1101: Load JTAG instruction register and pause
+ * in pause-ir:YES:NA:4:YES 4'b1110: Load JTAG instruction
+ * register (continue from pause-ir):YES:YES:4:YES
+ * 4'b1111: Load JTAG instruction register (continue
+ * from pause-ir and stop in pause-ir):YES:YES:4:YES
+ * </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_PRGM_MEM_START_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_PRGM_MEM_START_ADDR_r_t {
+ unsigned int tst_prgm;
+};
+
+/*! @struct ncp_axis_mtc_MTC_TDO_CAPTURE_MEM_START_ADDR_r_t
+ * @brief MTC TDO capture Memory Program Memory
+ * @details null
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_MTC_TDO_CAPTURE_MEM_START_ADDR_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_capture </td>
+ * <td width="20%" align="center"> 32 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> TDI capture memory - Data is right justified when
+ * written to the memory
+ * </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_MTC_TDO_CAPTURE_MEM_START_ADDR_r_t
+ *
+ */
+
+struct ncp_axis_mtc_MTC_TDO_CAPTURE_MEM_START_ADDR_r_t {
+
+ unsigned int tdo_capture;
+};
+
+/*! @struct ncp_axis_mtc_mtc_tstgen_int_status_r_t
+ * @brief Interrupt Status Register
+ * @details This register holds interrupt status
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_mtc_tstgen_int_status_r_t\n
+ * </td>(
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 25 </td>
+ * <td width="20%" align="center"> 7 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_record_ram_addr_overflow_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 6 </td>
+ * <td width="30%"> The TDO Capture memory overflowed. Data is lost when
+ * this alarm occurs. Status
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param nxt_task_error_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 5 </td>
+ * <td width="30%"> Fatal Error Occured while processing a TASK. TESTGEN
+ * state machine is halted at that failure. The errored
+ * task must be fixed and the sw_reset signal written
+ * to restart the test. Status
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tst_gen_state_error_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> Fatal Error Occured while processing a TASK. TESTGEN
+ * state machine is halted at the failure. The errored
+ * task must be fixed and the sw_reset signal written
+ * to restart the test. Status
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param cont_after_pause_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="30%"> Active anytime the TESTGEN state machine is paused.
+ * A write to cont_after_pause or single_step one-shot
+ * registers will release the state machine from the
+ * paused state. Status
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_shiftir_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Paused in Shift-IR state Status </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_shiftdr_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> Paused in Shift-DR state Status </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_end_of_test_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> In End-of-Test Task Status </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_mtc_tstgen_int_status_r_t
+ *
+ */
+
+struct ncp_axis_mtc_mtc_tstgen_int_status_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:25;
+ unsigned tdo_record_ram_addr_overflow_os:1;
+ unsigned nxt_task_error_os:1;
+ unsigned tst_gen_state_error_os:1;
+ unsigned cont_after_pause_os:1;
+ unsigned pause_in_shiftir_os:1;
+ unsigned pause_in_shiftdr_os:1;
+ unsigned curr_task_end_of_test_os:1;
+#else /* Little Endian */
+ unsigned curr_task_end_of_test_os:1;
+ unsigned pause_in_shiftdr_os:1;
+ unsigned pause_in_shiftir_os:1;
+ unsigned cont_after_pause_os:1;
+ unsigned tst_gen_state_error_os:1;
+ unsigned nxt_task_error_os:1;
+ unsigned tdo_record_ram_addr_overflow_os:1;
+ unsigned reserved0:25;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_mtc_tstgen_int_en_r_t
+ * @brief Interrupt Enable Register
+ * @details This register enables interrupts
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_mtc_tstgen_int_en_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 25 </td>
+ * <td width="20%" align="center"> 7 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_record_ram_addr_overflow_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 6 </td>
+ * <td width="30%"> The TDO Capture memory overflowed. Data is lost when
+ * this alarm occurs. Enable
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param nxt_task_error_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 5 </td>
+ * <td width="30%"> Fatal Error Occured while processing a TASK. TESTGEN
+ * state machine is halted at that failure. The errored
+ * task must be fixed and the sw_reset signal written
+ * to restart the test. Enable
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tst_gen_state_error_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> Fatal Error Occured while processing a TASK. TESTGEN
+ * state machine is halted at the failure. The errored
+ * task must be fixed and the sw_reset signal written
+ * to restart the test. Enable
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param cont_after_pause_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="30%"> Active anytime the TESTGEN state machine is paused.
+ * A write to cont_after_pause or single_step one-shot
+ * registers will release the state machine from the
+ * paused state. Enable
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_shiftir_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Paused in Shift-IR state Enable </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_shiftdr_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> Paused in Shift-DR state Enable </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_end_of_test_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> In End-of-Test Task Enable </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_mtc_tstgen_int_en_r_t
+ *
+ */
+
+struct ncp_axis_mtc_mtc_tstgen_int_en_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:25;
+ unsigned tdo_record_ram_addr_overflow_os:1;
+ unsigned nxt_task_error_os:1;
+ unsigned tst_gen_state_error_os:1;
+ unsigned cont_after_pause_os:1;
+ unsigned pause_in_shiftir_os:1;
+ unsigned pause_in_shiftdr_os:1;
+ unsigned curr_task_end_of_test_os:1;
+#else /* Little Endian */
+ unsigned curr_task_end_of_test_os:1;
+ unsigned pause_in_shiftdr_os:1;
+ unsigned pause_in_shiftir_os:1;
+ unsigned cont_after_pause_os:1;
+ unsigned tst_gen_state_error_os:1;
+ unsigned nxt_task_error_os:1;
+ unsigned tdo_record_ram_addr_overflow_os:1;
+ unsigned reserved0:25;
+#endif
+} ;
+
+/*! @struct ncp_axis_mtc_mtc_tstgen_int_force_r_t
+ * @brief Interrupt Force Register
+ * @details This address is an alias for the Interrupt Status register
+ that allows normal CFG writes (as opposed to the Clear-On-Write-One
+ behavior if the Interrupt Status register address is used). This
+ allows CFG to set interrupt bits for testing purposes. Reading this
+ address returns the current value of the Interrupt Status Register.
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_mtc_tstgen_int_force_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 25 </td>
+ * <td width="20%" align="center"> 7 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tdo_record_ram_addr_overflow_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 6 </td>
+ * <td width="30%"> The TDO Capture memory overflowed. Data is lost when
+ * this alarm occurs. Force
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param nxt_task_error_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 5 </td>
+ * <td width="30%"> Fatal Error Occured while processing a TASK. TESTGEN
+ * state machine is halted at that failure. The errored
+ * task must be fixed and the sw_reset signal written
+ * to restart the test. Force
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param tst_gen_state_error_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> Fatal Error Occured while processing a TASK. TESTGEN
+ * state machine is halted at the failure. The errored
+ * task must be fixed and the sw_reset signal written
+ * to restart the test. Force
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param cont_after_pause_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="30%"> Active anytime the TESTGEN state machine is paused.
+ * A write to cont_after_pause or single_step one-shot
+ * registers will release the state machine from the
+ * paused state. Force
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_shiftir_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Paused in Shift-IR state Force </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param pause_in_shiftdr_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> Paused in Shift-DR state Force </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param curr_task_end_of_test_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> In End-of-Test Task Force </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_mtc_tstgen_int_force_r_t
+ *
+ */
+
+struct ncp_axis_mtc_mtc_tstgen_int_force_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:25;
+ unsigned tdo_record_ram_addr_overflow_os:1;
+ unsigned nxt_task_error_os:1;
+ unsigned tst_gen_state_error_os:1;
+ unsigned cont_after_pause_os:1;
+ unsigned pause_in_shiftir_os:1;
+ unsigned pause_in_shiftdr_os:1;
+ unsigned curr_task_end_of_test_os:1;
+#else /* Little Endian */
+ unsigned curr_task_end_of_test_os:1;
+ unsigned pause_in_shiftdr_os:1;
+ unsigned pause_in_shiftir_os:1;
+ unsigned cont_after_pause_os:1;
+ unsigned tst_gen_state_error_os:1;
+ unsigned nxt_task_error_os:1;
+ unsigned tdo_record_ram_addr_overflow_os:1;
+ unsigned reserved0:25;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_mtc_ecc_int_status_r_t
+ * @brief Interrupt Status Register
+ * @details This register holds interrupt status
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_mtc_ecc_int_status_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 28 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_mult_tstgen_prgm_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="30%"> Multi-bit ECC Error in TESTGEN Program Memory Status </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_mult_tdo_capture_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Multi-bit ECC Error in TDO Capture Memory Status </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_single_tstgen_prgm_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> Single-bit ECC Error in TESTGEN Program Memory Status </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_single_tdo_capture_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Single-bit ECC Error in TDO Capture Memory Status </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_mtc_ecc_int_status_r_t
+ *
+ */
+
+struct ncp_axis_mtc_mtc_ecc_int_status_r_t{
+
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:28;
+ unsigned ecc_mult_tstgen_prgm_mem_os:1;
+ unsigned ecc_mult_tdo_capture_mem_os:1;
+ unsigned ecc_single_tstgen_prgm_mem_os:1;
+ unsigned ecc_single_tdo_capture_mem_os:1;
+#else /* Little Endian */
+ unsigned ecc_single_tdo_capture_mem_os:1;
+ unsigned ecc_single_tstgen_prgm_mem_os:1;
+ unsigned ecc_mult_tdo_capture_mem_os:1;
+ unsigned ecc_mult_tstgen_prgm_mem_os:1;
+ unsigned reserved0:28;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_mtc_ecc_int_en_r_t
+ * @brief Interrupt Enable Register
+ * @details This register enables interrupts
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_mtc_ecc_int_en_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 28 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_mult_tstgen_prgm_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="30%"> Multi-bit ECC Error in TESTGEN Program Memory Enable </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_mult_tdo_capture_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Multi-bit ECC Error in TDO Capture Memory Enable </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_single_tstgen_prgm_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> Single-bit ECC Error in TESTGEN Program Memory Enable </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_single_tdo_capture_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Single-bit ECC Error in TDO Capture Memory Enable </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_mtc_ecc_int_en_r_t
+ *
+ */
+
+struct ncp_axis_mtc_mtc_ecc_int_en_r_t {
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:28;
+ unsigned ecc_mult_tstgen_prgm_mem_os:1;
+ unsigned ecc_mult_tdo_capture_mem_os:1;
+ unsigned ecc_single_tstgen_prgm_mem_os:1;
+ unsigned ecc_single_tdo_capture_mem_os:1;
+#else /* Little Endian */
+ unsigned ecc_single_tdo_capture_mem_os:1;
+ unsigned ecc_single_tstgen_prgm_mem_os:1;
+ unsigned ecc_mult_tdo_capture_mem_os:1;
+ unsigned ecc_mult_tstgen_prgm_mem_os:1;
+ unsigned reserved0:28;
+#endif
+};
+
+/*! @struct ncp_axis_mtc_mtc_ecc_int_force_r_t
+ * @brief Interrupt Force Register
+ * @details This address is an alias for the Interrupt Status register
+ that allows normal CFG writes (as opposed to the Clear-On-Write-One
+ behavior if the Interrupt Status register address is used). This
+ allows CFG to set interrupt bits for testing purposes. Reading this
+ address returns the current value of the Interrupt Status Register.
+ * <table width="70%" align="center">
+ * <tr>
+ * <td colspan="4" align="center">
+ * struct ncp_axis_mtc_mtc_ecc_int_force_r_t\n
+ * </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"><b> Name </b></td>
+ * <td width="20%" align="center"><b> Width </b></td>
+ * <td width="20%" align="center"><b> Start Offset </b></td>
+ * <td width="30%"><b> Description </b></td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param reserved0 </td>
+ * <td width="20%" align="center"> 28 </td>
+ * <td width="20%" align="center"> 4 </td>
+ * <td width="30%"> Reserved for future use </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_mult_tstgen_prgm_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 3 </td>
+ * <td width="30%"> Multi-bit ECC Error in TESTGEN Program Memory Force </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_mult_tdo_capture_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 2 </td>
+ * <td width="30%"> Multi-bit ECC Error in TDO Capture Memory Force </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @param ecc_single_tstgen_prgm_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="30%"> Single-bit ECC Error in TESTGEN Program Memory Force </td>
+ * </tr>
+ * <tr>
+ * <td width="30%"> @:param ecc_single_tdo_capture_mem_os </td>
+ * <td width="20%" align="center"> 1 </td>
+ * <td width="20%" align="center"> 0 </td>
+ * <td width="30%"> Single-bit ECC Error in TDO Capture Memory Force </td>
+ * </tr>
+ * </table>
+ * Applies to: 5500 --> ncp_axis_mtc_mtc_ecc_int_force_r_t
+ *
+ */
+
+struct ncp_axis_mtc_mtc_ecc_int_force_r_t{
+#ifdef NCP_BIG_ENDIAN
+ unsigned reserved0:28;
+ unsigned ecc_mult_tstgen_prgm_mem_os:1;
+ unsigned ecc_mult_tdo_capture_mem_os:1;
+ unsigned ecc_single_tstgen_prgm_mem_os:1;
+ unsigned ecc_single_tdo_capture_mem_os:1;
+#else /* Little Endian */
+ unsigned ecc_single_tdo_capture_mem_os:1;
+ unsigned ecc_single_tstgen_prgm_mem_os:1;
+ unsigned ecc_mult_tdo_capture_mem_os:1;
+ unsigned ecc_mult_tstgen_prgm_mem_os:1;
+ unsigned reserved0:28;
+#endif
+};
+
+
+/******************************************************/
+/* end of RDL register definitions */
+/******************************************************/
+
+
+struct mtc_device {
+ struct kref ref;
+ struct platform_device *pdev;
+ unsigned long flags;
+#define FLAG_REGISTERED 0 /* Misc device registered */
+ struct mtc_regs __iomem *regs;
+ u32 __iomem *prgmem;
+ u32 __iomem *tdomem;
+ unsigned int irq;
+ struct miscdevice char_device;
+};
+
+#define miscdev_to_mtc(mdev) container_of(mdev, struct mtc_device, char_device)
+
+
+
+/* Called when removed and last reference is released */
+static void mtc_destroy(struct kref *ref);
+
+/**
+ * mtc_dev_open
+ *
+ * Returns 0 for success or negative errno.
+ */
+static int
+mtc_dev_open(struct inode *inode, struct file *filp)
+{
+ struct miscdevice *misc = filp->private_data;
+ struct mtc_device *dev = miscdev_to_mtc(misc);
+ pr_debug("mtc_dev_open(%p)\n", dev);
+ kref_get(&dev->ref);
+ return 0;
+}
+
+/**
+ * mtc_dev_release
+ */
+static int
+mtc_dev_release(struct inode *inode, struct file *filp)
+{
+ struct miscdevice *misc = filp->private_data;
+ struct mtc_device *dev = miscdev_to_mtc(misc);
+ pr_debug("mtc_dev_release(%p)\n", dev);
+ kref_put(&dev->ref, mtc_destroy);
+ return 0;
+}
+
+/**
+ * mtc_dev_read
+ *
+ * Returns number of valid bits read or negative errno.
+ */
+static ssize_t
+mtc_dev_read(struct file *filp,
+ char __user *data,
+ size_t len,
+ loff_t *ppose)
+{
+ struct miscdevice *misc = filp->private_data;
+ struct mtc_device *dev = miscdev_to_mtc(misc);
+ u32 __iomem *ptdo;
+ u32 tdo_size_word, tdo_size_bit; /* data to be read in words */
+ struct ncp_axis_mtc_MTC_STATUS1_REG_ADDR_r_t status1Reg = {0};
+ struct ncp_axis_mtc_MTC_EXECUTE1_REG_ADDR_r_t exec1Reg = {0};
+
+ pr_debug("mtc_dev_read(%u @ %llu)\n", len, *ppose);
+ ptdo = dev->tdomem;
+
+ /* flush tdo buffer */
+ exec1Reg.tdo_flush_capture_data = 1;
+ dev->regs->execute = *((u32 *) &exec1Reg);
+
+ /* read status 1register */
+ status1Reg =
+ *((struct ncp_axis_mtc_MTC_STATUS1_REG_ADDR_r_t *) &(dev->regs->status1));
+ tdo_size_bit = status1Reg.tdo_record_ram_bit_counter;
+
+ /* test code for mtc memory sim only */
+ /* tdo_size_bit = 8192;*/
+ /* end of test code */
+
+ tdo_size_word = (tdo_size_bit + 31)/32;
+ #ifdef DEBUG
+ printk(KERN_DEBUG"mtc_dev_read(), tdo_bit=%d tdo_word=%d \n",
+ tdo_size_bit, tdo_size_word);
+ #endif
+ /* copy tdo data to user space, always read from location 0
+ because we reset tdomem after each read */
+ if (copy_to_user(data, ptdo, tdo_size_word*4))
+ return -EFAULT;
+
+ /* data sent to user, reset tdo capture buffer */
+ memset(&exec1Reg, 0, sizeof(exec1Reg));
+ exec1Reg.tdo_capture_reset = 1;
+ dev->regs->execute = *((u32 *) &exec1Reg);
+
+ /* return # of bits */
+ return tdo_size_bit;
+}
+
+/**
+ * mtc_dev_write
+ *
+ * Returns number of bytes written or negative errno.
+ */
+
+static ssize_t
+mtc_dev_write(struct file *filp,
+ const char __user *data,
+ size_t len,
+ loff_t *ppose)
+{
+
+ struct miscdevice *misc = filp->private_data;
+ struct mtc_device *dev = miscdev_to_mtc(misc);
+ u32 __iomem *pprg;
+ u32 mtc_buf[256]; /* max 256 words */
+ u32 size, size1, isWraparound = 0, i; /* size in word */
+ struct ncp_axis_mtc_MTC_STATUS1_REG_ADDR_r_t status1Reg = {0};
+
+ pr_debug("mtc_dev_write(%u @ %llu)\n", len, *ppose);
+
+ if (len > 1024)
+ return -EINVAL;
+
+ size = len/4;
+ size1 = size;
+
+ /* copy to a lcoal buffer */
+ memset(mtc_buf, 0, 1024);
+ if (copy_from_user((void *)mtc_buf, (void *) data, len)) {
+ pr_debug("MTC Error write\n");
+ return -EFAULT;
+ }
+
+ /* read status 1register, find the starting write offset */
+ status1Reg =
+ *((struct ncp_axis_mtc_MTC_STATUS1_REG_ADDR_r_t *) &(dev->regs->status1));
+
+ /* TEST CODE when mtc sim is used*/
+ /* status1Reg.prgm_mem_rd_addr = 253;*/
+ /* printk(KERN_DEBUG"buf offset=%d\n",status1Reg.prgm_mem_rd_addr );*/
+ /*END OF TEST CODE */
+
+ /* find starting location of the write */
+ pprg = dev->prgmem + status1Reg.prgm_mem_rd_addr;
+
+ /* determine if wrap around is needed */
+ if (status1Reg.prgm_mem_rd_addr + size > 256) {
+ isWraparound = 1;
+ /* number of words load from starting location */
+ size1 = 256 - status1Reg.prgm_mem_rd_addr;
+ /*number of words load from location 0 will be size-size1 */
+ #ifdef DEBUG
+ printk(KERN_DEBUG"Wraparound size=%d, size1=%d size-size1=%d\n",
+ size, size1, size-size1);
+ #endif
+ }
+ #ifdef DEBUG
+ printk(KERN_DEBUG"Appending buff size1=%d\n", size1);
+ #endif
+ for (i = 0; i < size1; i++) {
+ #ifdef DEBUG
+ printk(KERN_DEBUG"i=%d mtc_buf[i]=%d pprg=0x%x\n",
+ i, mtc_buf[i], (u32) pprg);
+ #endif
+ *pprg = mtc_buf[i];
+ pprg++;
+ }
+
+ /* wraparound, copy the 2nd half */
+ if (isWraparound) {
+ pprg = dev->prgmem; /* reset write pointer to location 0 */
+ #ifdef DEBUG
+ printk(KERN_DEBUG"\n\nWraparound buff size=%d\n", size-size1);
+ #endif
+ for (i = 0; i < (size-size1); i++) {
+ #ifdef DEBUG
+ printk(KERN_DEBUG"i=%d mtc_buf[size1+i]=%d pprg=0x%x\n",
+ i, mtc_buf[size1+i], (u32) pprg);
+ #endif
+ *pprg = mtc_buf[size1+i];
+ pprg++;
+ }
+ }
+
+ return len;
+}
+
+/**
+ * mtc_dev_ioctl
+ *
+ */
+
+static long _mtc_config(struct mtc_device *dev,
+ struct lsi_mtc_cfg_t *pMTCCfg);
+
+
+static long
+mtc_dev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ struct miscdevice *misc = filp->private_data;
+ struct mtc_device *dev = miscdev_to_mtc(misc);
+ long ret = 0;
+ u32 addr, tmp2;
+ unsigned long numByteCopied;
+
+ pr_debug("mtc_dev_ioctl(%#x, %#lx)\n", cmd, arg);
+
+ switch (cmd) {
+
+ case MTC_DEBUG_OP:
+ numByteCopied =
+ copy_from_user((void *) &addr, (void *) arg, sizeof(unsigned int));
+ if (numByteCopied) {
+ printk(KERN_DEBUG"MTC Error ioctl\n");
+ return -EFAULT;
+ }
+ tmp2 = *((u32 *)dev->regs + addr/4);
+
+ if (copy_to_user((void *)arg, &tmp2, sizeof(unsigned int)))
+ return -EFAULT;
+
+ break;
+
+ case MTC_CFG:
+ {
+ struct lsi_mtc_cfg_t mtc_cfg;
+ if (copy_from_user((void *) &mtc_cfg, (void *) arg, sizeof(mtc_cfg))) {
+ printk(KERN_DEBUG"MTC Error ioctl\n");
+ return -EFAULT;
+ }
+
+ ret = _mtc_config(dev, &mtc_cfg);
+ }
+ break;
+
+ case MTC_SINGLESTEP_ENABLE:
+ {
+ struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t cfg0 = {0};
+ int single_step;
+ if (copy_from_user((void *) &single_step, (void *) arg, sizeof(int))) {
+ printk(KERN_DEBUG"MTC Error ioctl\n");
+ return -EFAULT;
+ }
+
+ if ((single_step != 0) && (single_step != 1))
+ return -EINVAL;
+
+ cfg0 =
+ *((struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t *) &(dev->regs->config0));
+ cfg0.single_step_en = single_step;
+ dev->regs->config0 = *((u32 *) &cfg0);
+ #ifdef DEBUG
+ printk(KERN_DEBUG"MTC_SINGLESTEP_ENABLE: dev->regs->config0=0x%x\n",
+ dev->regs->config0);
+ #endif
+ }
+
+ break;
+
+ case MTC_LOOPMODE_ENABLE:
+ {
+ struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t cfg0 = {0};
+ int loop_mode;
+ if (copy_from_user((void *) &loop_mode, (void *) arg, sizeof(int))) {
+ printk(KERN_DEBUG"MTC Error ioctl\n");
+ return -EFAULT;
+ }
+
+ if ((loop_mode != 0) && (loop_mode != 1))
+ return -EINVAL;
+
+ cfg0 =
+ *((struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t *) &(dev->regs->config0));
+ cfg0.loop_en = loop_mode;
+ dev->regs->config0 = *((u32 *) &cfg0);
+ #ifdef DEBUG
+ printk(KERN_DEBUG"MTC_LOOPMODE_ENABLE dev->regs->config0=0x%x\n",
+ dev->regs->config0);
+ #endif
+ }
+
+ break;
+
+ case MTC_RESET:
+ {
+ struct ncp_axis_mtc_MTC_EXECUTE1_REG_ADDR_r_t exec1 = {0};
+ exec1.sw_reset = 1;
+ dev->regs->execute = *((u32 *) &exec1);
+ #ifdef DEBUG
+ printk(KERN_DEBUG"dev->regs->execute=0x%x \n", dev->regs->execute);
+ #endif
+ }
+
+ break;
+
+ case MTC_TCKCLK_GATE:
+ {
+ struct lsi_mtc_tckclk_gate_t tckGate;
+ struct ncp_axis_mtc_MTC_CONFIG1_REG_ADDR_r_t cfg1 = {0};
+
+ if (copy_from_user((void *) &tckGate, (void *) arg, sizeof(tckGate))) {
+ printk(KERN_DEBUG"MTC Error ioctl\n");
+ return -EFAULT;
+ }
+
+ if (((tckGate.gate_tck_test_logic_reset != 0)
+ && (tckGate.gate_tck_test_logic_reset != 1))
+ || ((tckGate.gate_tck != 0) && (tckGate.gate_tck != 1)))
+ return -EINVAL;
+
+ cfg1 =
+ *((struct ncp_axis_mtc_MTC_CONFIG1_REG_ADDR_r_t *) &(dev->regs->config1));
+ cfg1.sw_gate_tck_test_logic_reset = tckGate.gate_tck_test_logic_reset;
+ cfg1.sw_gate_tck = tckGate.gate_tck;
+ dev->regs->config1 = *((u32 *) &cfg1);
+ #ifdef DEBUG
+ printk(KERN_DEBUG"dev->regs->config1=0x%x \n", dev->regs->config1);
+ #endif
+ }
+
+ break;
+
+ case MTC_STARTSTOP_EXEC:
+ {
+ struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t cfg0 = {0};
+ int start_stop;
+ if (copy_from_user((void *) &start_stop, (void *) arg, sizeof(int))) {
+ printk(KERN_DEBUG"MTC Error ioctl\n");
+ return -EFAULT;
+ }
+
+ if ((start_stop != 0) && (start_stop != 1))
+ return -EINVAL;
+
+ cfg0 =
+ *((struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t *) &(dev->regs->config0));
+ cfg0.start_stopn = start_stop;
+ dev->regs->config0 = *((u32 *) &cfg0);
+ #ifdef DEBUG
+ printk(KERN_DEBUG"dev->regs->config0=0x%x \n", dev->regs->config0);
+ #endif
+ }
+
+ break;
+
+ case MTC_SINGLESTEP_EXEC:
+ {
+ struct ncp_axis_mtc_MTC_EXECUTE1_REG_ADDR_r_t exec1 = {0};
+ exec1.single_step = 1;
+ dev->regs->execute = *((u32 *) &exec1);
+ pr_debug("dev->regs->execute=0x%x \n", dev->regs->execute);
+
+ }
+ break;
+
+ case MTC_CONTINUE_EXEC:
+ {
+ struct ncp_axis_mtc_MTC_EXECUTE1_REG_ADDR_r_t exec1 = {0};
+ exec1.cont_after_pause = 1;
+ dev->regs->execute = *((u32 *) &exec1);
+ pr_debug("dev->regs->execute=0x%x \n", dev->regs->execute);
+
+ }
+ break;
+
+ case MTC_READ_STATS:
+ {
+ struct lsi_mtc_stats_regs_t stats;
+
+ stats.statsReg1 = dev->regs->status1;
+ stats.statsReg2 = dev->regs->status2;
+
+ if (copy_to_user((void *)arg, &stats, sizeof(stats)))
+ return -EFAULT;
+
+ }
+ break;
+
+ case MTC_READ_DEBUG:
+ {
+ struct lsi_mtc_debug_regs_t debug;
+
+ debug.debugReg0 = dev->regs->debug0;
+ debug.debugReg1 = dev->regs->debug1;
+ debug.debugReg2 = dev->regs->debug2;
+ debug.debugReg3 = dev->regs->debug3;
+ debug.debugReg4 = dev->regs->debug4;
+ debug.debugReg5 = dev->regs->debug5;
+
+ if (copy_to_user((void *)arg, &debug, sizeof(debug)))
+ return -EFAULT;
+
+ }
+
+ break;
+
+
+ default:
+ printk(KERN_DEBUG"Invalid ioctl cmd=%d MTC_DEBUG_OP=%d\n",
+ cmd, MTC_DEBUG_OP);
+ ret = -EINVAL;
+
+ }
+
+ return ret;
+}
+
+static const struct file_operations mtc_char_ops = {
+ .owner = THIS_MODULE,
+ .open = mtc_dev_open,
+ .release = mtc_dev_release,
+ .llseek = generic_file_llseek,
+ .read = mtc_dev_read,
+ .write = mtc_dev_write,
+ .unlocked_ioctl = mtc_dev_ioctl
+};
+
+
+static irqreturn_t
+mtc_isr(int irq_no, void *arg)
+{
+ struct mtc_device *priv = arg;
+ u32 status = readl(&priv->regs->int_status);
+
+ pr_debug("mtc: int status %#x\n", status);
+
+ /* Handle interrupt */
+ /* ... */
+
+ /* Write bits to clear interrupt status */
+ writel(status, &priv->regs->int_status);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * mtc_probe
+ *
+ * Initialize device.
+ */
+static int __devinit
+mtc_probe(struct platform_device *pdev)
+{
+static struct mtc_device *dev;
+ void __iomem *regs;
+ int rc;
+
+ printk(KERN_DEBUG"!!!!MTC: mtc_probe()\n");
+ /* Allocate space for device private data */
+ dev = kzalloc(sizeof *dev, GFP_KERNEL);
+ if (!dev) {
+ rc = -ENOMEM;
+ goto err;
+ }
+ dev_set_drvdata(&pdev->dev, &dev);
+ kref_init(&dev->ref);
+ dev->pdev = pdev;
+
+ /* Map hardware registers */
+ regs = of_iomap(pdev->dev.of_node, 0);
+ if (!regs) {
+ rc = -EINVAL;
+ goto err;
+ }
+#ifdef __MTC_SIMULATION
+ dev->regs = &_mtc_regs;
+ dev->prgmem = _mtc_prgmem;
+ dev->tdomem = _mtc_tdomem;
+
+#else
+ dev->regs = regs;
+ dev->prgmem = regs + MTC_PRGMEM_OFFSET/4;
+ dev->tdomem = regs + MTC_TDOMEM_OFFSET/4;
+#endif
+ /* Attach to IRQ */
+ dev->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ rc = request_irq(dev->irq, mtc_isr, 0, "mtc", &dev);
+ if (rc)
+ goto err;
+
+ /* Initialize hardware */
+ /* ... */
+
+ /*
+ * Register device client interface
+ */
+
+ dev->char_device.minor = MISC_DYNAMIC_MINOR;
+ dev->char_device.name = "mtc";
+ dev->char_device.fops = &mtc_char_ops;
+
+ rc = misc_register(&dev->char_device);
+ if (rc)
+ goto err;
+ set_bit(FLAG_REGISTERED, &dev->flags);
+
+ return 0;
+
+err:
+ if (dev)
+ kref_put(&dev->ref, mtc_destroy);
+ dev_err(&pdev->dev, "Failed to probe device (%d)\n", rc);
+ return rc;
+}
+
+/**
+ * mtc_remove
+ */
+static int __devexit
+mtc_remove(struct platform_device *pdev)
+{
+ struct mtc_device *dev = dev_get_drvdata(&pdev->dev);
+ kref_put(&dev->ref, mtc_destroy);
+ return 0;
+}
+
+/*
+ * mtc_destroy
+ *
+ * Called when refcount reaches zero to unregister device and free resources.
+ */
+static void
+mtc_destroy(struct kref *ref)
+{
+ struct mtc_device *dev = container_of(ref, struct mtc_device, ref);
+
+ dev_set_drvdata(&dev->pdev->dev, NULL);
+ if (test_and_clear_bit(FLAG_REGISTERED, &dev->flags))
+ misc_deregister(&dev->char_device);
+ if (dev->irq)
+ free_irq(dev->irq, &dev);
+ iounmap(dev->regs);
+ kfree(dev);
+}
+
+
+#ifdef CONFIG_PM
+static int
+mtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ return -ENOSYS;
+}
+
+static int
+mtc_resume(struct platform_device *pdev)
+{
+ return -ENOSYS;
+}
+#else
+#define mtc_suspend NULL
+#define mtc_resume NULL
+#endif
+
+static const struct of_device_id mtc_of_ids[] = {
+ { .compatible = "lsi,mtc" },
+ {}
+};
+
+static struct platform_driver mtc_driver = {
+ .driver = {
+ .name = "mtc",
+ .owner = THIS_MODULE,
+ .of_match_table = mtc_of_ids,
+ },
+ .probe = mtc_probe,
+ .remove = mtc_remove,
+ .suspend = mtc_suspend,
+ .resume = mtc_resume
+};
+
+module_platform_driver(mtc_driver);
+
+MODULE_AUTHOR("LSI Corporation");
+MODULE_DESCRIPTION("Master Test Controller driver");
+MODULE_LICENSE("GPL");
+
+/* MTC operating mode. */
+#define LSI_MTC_BOARDTEST_MODE 0 /* MTC Board Test Mode. */
+#define LSI_MTC_EXTTEST_MODE 1 /* MTC External Test Mode DBC3 excluded. */
+#define LSI_MTC_SYSTTEST_MODE 2/* MTC System Test Mode DBC3 excluded. */
+
+
+/* Test data output recording mode. */
+/* Do not save TDO data during shiftir and shiftdr. */
+#define LSI_MTC_TDO_NOREC 0
+ /* Do not save TDO data during shiftir, but save TDO during shiftdr. */
+#define LSI_MTC_TDO_NOREC_SHIFTIR 1
+ /* Do not save TDO data during shiftdr, but save TDO during shiftir. */
+#define LSI_MTC_TDO_NOREC_SHIFTDR 2
+ /* Save TDO data during shiftdr and shiftir. */
+#define ACELL_MTCI_TDO_REC_ALL 3
+
+/* Test data output buffer mode. */
+/* TDO output buffer always enabled. */
+#define LSI_MTC_TDOBUF_ENABLED 0
+/* TDO output buffer active when in shift-DR or shift-IR states
+ and inactive in all other states. */
+#define LSI_MTC_TDOBUF_TRISTATE_CAPABLE 1
+
+
+
+/* config MTC hardware */
+static long _mtc_config(struct mtc_device *dev,
+ struct lsi_mtc_cfg_t *pMTCCfg)
+{
+
+ struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t cfg0 = {0};
+ struct ncp_axis_mtc_MTC_CONFIG1_REG_ADDR_r_t cfg1 = {0};
+ struct ncp_axis_mtc_MTC_EXECUTE1_REG_ADDR_r_t exec1 = {0};
+
+ if ((!pMTCCfg) || (!dev))
+ return -EINVAL;
+
+ /* 1. stop testgen state machine */
+ cfg0 =
+ *((struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t *) &(dev->regs->config0));
+ cfg0.start_stopn = 0;
+ dev->regs->config0 = *((u32 *) &cfg0);
+
+ /* 2. reset testgen */
+ exec1.sw_reset = 1;
+ dev->regs->execute = *((u32 *) &exec1);
+
+ /* 3. config MTC */
+ cfg0 =
+ *((struct ncp_axis_mtc_MTC_CONFIG0_REG_ADDR_r_t *) &(dev->regs->config0));
+
+ cfg1 =
+ *((struct ncp_axis_mtc_MTC_CONFIG1_REG_ADDR_r_t *) &(dev->regs->config1));
+
+ /*set MTC mode */
+ if (pMTCCfg->opMode == LSI_MTC_BOARDTEST_MODE) {
+ /* board testing mode */
+ cfg0.cfg_config_ctl = 0;
+ } else if (pMTCCfg->opMode == LSI_MTC_EXTTEST_MODE) {
+ /* external testing mode */
+ cfg0.cfg_config_ctl = 3;
+ } else {
+ /* system testing mode */
+ cfg0.cfg_config_ctl = 5;
+
+ }
+
+ /* set clock rate */
+ cfg0.rate_sel = pMTCCfg->clkSpeed;
+
+ /* set TDO buffer mode */
+ cfg0.mtc_mpu_tdo_inactive_en = pMTCCfg->buffMode;
+
+ /* set TDO recording mode */
+ if (pMTCCfg->recMode == LSI_MTC_TDO_NOREC) {
+ cfg1.record_tdo_in_shift_ir_state = 0;
+ cfg1.record_tdo_in_shift_dr_state = 0;
+ } else if (pMTCCfg->recMode == LSI_MTC_TDO_NOREC_SHIFTIR) {
+ cfg1.record_tdo_in_shift_ir_state = 1;
+ cfg1.record_tdo_in_shift_dr_state = 0;
+ } else if (pMTCCfg->recMode == LSI_MTC_TDO_NOREC_SHIFTDR) {
+ cfg1.record_tdo_in_shift_ir_state = 1;
+ cfg1.record_tdo_in_shift_dr_state = 0;
+ } else {
+ /* recMode == ACELL_MTCI_TDO_REC_ALL */
+ cfg1.record_tdo_in_shift_ir_state = 1;
+ cfg1.record_tdo_in_shift_dr_state = 1;
+ }
+
+ dev->regs->config0 = *((u32 *) &cfg0);
+ dev->regs->config1 = *((u32 *) &cfg1);
+
+#ifdef DEBUG
+ printk(KERN_DEBUG"buffmode=%d,rate=%d dev->regs->config0 =0x%x \n",
+ pMTCCfg->buffMode, pMTCCfg->clkSpeed, dev->regs->config0);
+
+ printk(KERN_DEBUG"dev->regs->config1 =0x%x, dev->regs-> execute=0x%x \n",
+ dev->regs->config1, dev->regs->execute);
+
+#endif
+ return 0;
+}
diff --git a/include/linux/lsi_mtc_ioctl.h b/include/linux/lsi_mtc_ioctl.h
new file mode 100644
index 0000000..b8f8321
--- /dev/null
+++ b/include/linux/lsi_mtc_ioctl.h
@@ -0,0 +1,72 @@
+#ifndef __LSI_MTC_IOCTLH
+#define __LSI_MTC_IOCTLH
+
+#include <linux/ioctl.h>
+
+#define LSI_MTC_IOC_MAGIC 0x49
+
+struct lsi_mtc_cfg_t {
+ unsigned int opMode;
+ unsigned int recMode;
+ unsigned int clkMod;
+ unsigned int clkSpeed;
+ unsigned int buffMode;
+};
+
+
+
+struct lsi_mtc_tckclk_gate_t {
+ unsigned int gate_tck_test_logic_reset;
+ unsigned int gate_tck;
+};
+
+struct lsi_mtc_stats_regs_t {
+ unsigned int statsReg1;
+ unsigned int statsReg2;
+};
+
+
+struct lsi_mtc_debug_regs_t {
+ unsigned int debugReg0;
+ unsigned int debugReg1;
+ unsigned int debugReg2;
+ unsigned int debugReg3;
+ unsigned int debugReg4;
+ unsigned int debugReg5;
+};
+
+/* debug operation */
+#define MTC_DEBUG_OP _IOWR(LSI_MTC_IOC_MAGIC, 0, int)
+
+/* MTC configuration */
+#define MTC_CFG _IOW(LSI_MTC_IOC_MAGIC, 1, struct lsi_mtc_cfg_t)
+
+/* configure enable/disable single step */
+#define MTC_SINGLESTEP_ENABLE _IOW(LSI_MTC_IOC_MAGIC, 2, int)
+
+/*enale/disbale loop mode */
+#define MTC_LOOPMODE_ENABLE _IOW(LSI_MTC_IOC_MAGIC, 3, int)
+
+/* rest MTC */
+#define MTC_RESET _IO(LSI_MTC_IOC_MAGIC, 4)
+
+/* config gate tck clokc */
+#define MTC_TCKCLK_GATE _IOW(LSI_MTC_IOC_MAGIC, 5, struct lsi_mtc_tckclk_gate_t)
+
+
+/* start/stop execution */
+#define MTC_STARTSTOP_EXEC _IOW(LSI_MTC_IOC_MAGIC, 6, int)
+
+/* single step execution */
+#define MTC_SINGLESTEP_EXEC _IO(LSI_MTC_IOC_MAGIC, 7)
+
+/* continue after pause execution */
+#define MTC_CONTINUE_EXEC _IO(LSI_MTC_IOC_MAGIC, 8)
+
+/* read stats registers */
+#define MTC_READ_STATS _IOR(LSI_MTC_IOC_MAGIC, 9, struct lsi_mtc_stats_regs_t)
+
+/* read debug registers */
+#define MTC_READ_DEBUG _IOR(LSI_MTC_IOC_MAGIC, 10, struct lsi_mtc_debug_regs_t)
+
+#endif /* __LSI_MTC_IOCTLH*/
--
1.8.3
More information about the linux-yocto
mailing list